[1]温文源,葛巧琴.机床结构件上开孔大小对其静、动态特性的影响[J].东南大学学报(自然科学版),1983,13(3):18-28.[doi:10.3969/j.issn.1001-0505.1983.03.002]
 Wen Wen-ynan and Ge Qiao-qiu.Influences of the Size of Openings in Machine Tool Structural Components on Their Static and Dynamic characteristics[J].Journal of Southeast University (Natural Science Edition),1983,13(3):18-28.[doi:10.3969/j.issn.1001-0505.1983.03.002]
点击复制

机床结构件上开孔大小对其静、动态特性的影响()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
13
期数:
1983年第3期
页码:
18-28
栏目:
本刊信息
出版日期:
1983-09-20

文章信息/Info

Title:
Influences of the Size of Openings in Machine Tool Structural Components on Their Static and Dynamic characteristics
作者:
温文源葛巧琴
undefined
Author(s):
Wen Wen-ynan and Ge Qiao-qiu
关键词:
结构件 动态特性 弯曲刚度 机床结构 开孔大小 中隔板 固有频率 弯曲变形 方案 扭转刚度
分类号:
+
DOI:
10.3969/j.issn.1001-0505.1983.03.002
摘要:
本文研究机床结构件上窗孔的大小对构件静、动态特性的影响,获得一些定量结论,可供机床设计人员在考虑机床结构件静、动特性时作为参考。
Abstract:
This paper treats about the influences of the size of openings in machine tool structural components on their static and dynamic charactristics by Finite Element Method, and mad be taken as a refernce for machine tool designers.

相似文献/References:

[1]孙庆鸿,许志华,孙蓓蓓.AD250铰接式自卸车橡胶悬架系统动态特性试验研究[J].东南大学学报(自然科学版),2006,36(3):341.[doi:10.3969/j.issn.1001-0505.2006.03.001]
 Sun Qinghong,Xu Zhihua,Sun Beibei.Dynamics characteristic study of rubber suspension system of AD250 articulated dump truck[J].Journal of Southeast University (Natural Science Edition),2006,36(3):341.[doi:10.3969/j.issn.1001-0505.2006.03.001]
[2]刘继承,周传荣.机械结构边界条件动态设计方法研究[J].东南大学学报(自然科学版),2004,34(1):46.[doi:10.3969/j.issn.1001-0505.2004.01.011]
 Liu Jicheng,Zhou Chuanrong.Boundary dynamical design method research for mechanical structures[J].Journal of Southeast University (Natural Science Edition),2004,34(3):46.[doi:10.3969/j.issn.1001-0505.2004.01.011]
[3]吴南星,孙庆鸿,冯景华.机床进给伺服系统非线性摩擦特性及控制补偿研究[J].东南大学学报(自然科学版),2004,34(6):771.[doi:10.3969/j.issn.1001-0505.2004.06.012]
 Wu Nanxing,Sun Qinghong,et al.Study of influence on machine-tool dynamic characteristics of nonlinear friction and its compensation[J].Journal of Southeast University (Natural Science Edition),2004,34(3):771.[doi:10.3969/j.issn.1001-0505.2004.06.012]
[4]曹宪棣,刘振田.人体频响函数的测量和分析[J].东南大学学报(自然科学版),1986,16(2):20.[doi:10.3969/j.issn.1001-0505.1986.02.003]
 Zeng Xiandi Liu Zhentian.The Measurement And Analysis of Human Body’s Frequency Response Function[J].Journal of Southeast University (Natural Science Edition),1986,16(3):20.[doi:10.3969/j.issn.1001-0505.1986.02.003]
[5]张菁,赵家壁.异步电动机矢量控制系统中转子磁链保持不变原则的分析[J].东南大学学报(自然科学版),1986,16(2):79.[doi:10.3969/j.issn.1001-0505.1986.02.012]
 Zhang Jing Zhao Jiabi.Analysis of Maintaining the Rotor Flux-Linkage of Asynchronous Machine in Field-Oriented Control System[J].Journal of Southeast University (Natural Science Edition),1986,16(3):79.[doi:10.3969/j.issn.1001-0505.1986.02.012]
[6]温文源,葛巧琴.机床结构件静、动特性的有限元法计算研究(二)[J].东南大学学报(自然科学版),1981,11(2):85.[doi:10.3969/j.issn.1001-0505.1981.02.009]
 Wen Wen-yuan,Ge Qiao-qin.Computations by Finite Element Method for Static and Dynamic Characteristics Analysis of Machine Tool structures (2)[J].Journal of Southeast University (Natural Science Edition),1981,11(3):85.[doi:10.3969/j.issn.1001-0505.1981.02.009]
[7]吴伯修.限幅器限幅性能的分析及其电路元件的设计[J].东南大学学报(自然科学版),1958,4(1):58.[doi:10.3969/j.issn.1001-0505.1958.01.005]
 [J].Journal of Southeast University (Natural Science Edition),1958,4(3):58.[doi:10.3969/j.issn.1001-0505.1958.01.005]
[8]姜东,江智远,费庆国,等.考虑胶层的蜂窝夹层复合材料动态特性[J].东南大学学报(自然科学版),2013,43(5):1068.[doi:10.3969/j.issn.1001-0505.2013.05.028]
 Jiang Dong,Jiang Zhiyuan,Fei Qingguo,et al.Dynamic characteristics of honeycomb sandwich composite considering effect of adhesive layer[J].Journal of Southeast University (Natural Science Edition),2013,43(3):1068.[doi:10.3969/j.issn.1001-0505.2013.05.028]
[9]王志坤,蒋书运.锥孔双列短圆柱滚子轴承的动态特性分析[J].东南大学学报(自然科学版),2005,35(3):382.[doi:10.3969/j.issn.1001-0505.2005.03.013]
 Wang Zhikun,Jiang Shuyun.Dynamic characteristics analysis for double row cylindrical roller bearing with taper hole[J].Journal of Southeast University (Natural Science Edition),2005,35(3):382.[doi:10.3969/j.issn.1001-0505.2005.03.013]
[10]向文国,蔡宁生,刘西陲.PFBC-CC系统动态特性仿真的面向对象方法研究[J].东南大学学报(自然科学版),1999,29(5):91.[doi:10.3969/j.issn.1001-0505.1999.05.019]
 Xiang Wenguo,Cai Ningsheng,Liu Xichui.Object-Oriented Simulation of PFBC-CC System[J].Journal of Southeast University (Natural Science Edition),1999,29(3):91.[doi:10.3969/j.issn.1001-0505.1999.05.019]

更新日期/Last Update: 2013-05-01