[1]戴靖东,钱一呈.空气静压导轨的优化设计[J].东南大学学报(自然科学版),1984,14(2):28-39.[doi:10.3969/j.issn.1001-0505.1984.02.004]
 Dai Jingdong,Qian Yicheng.Optimum Design of Aerostatic Guideways[J].Journal of Southeast University (Natural Science Edition),1984,14(2):28-39.[doi:10.3969/j.issn.1001-0505.1984.02.004]
点击复制

空气静压导轨的优化设计()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
14
期数:
1984年第2期
页码:
28-39
栏目:
本刊信息
出版日期:
1984-06-20

文章信息/Info

Title:
Optimum Design of Aerostatic Guideways
作者:
戴靖东钱一呈
undefined
Author(s):
Dai Jingdong Qian Yicheng
关键词:
空气静压导轨 承载能力 优化设计 气垫 空气消耗量 膜压力 供气压力 雷诺方程 利用系统 气膜厚度
分类号:
+
DOI:
10.3969/j.issn.1001-0505.1984.02.004
摘要:
本文在力学和数学分析的基础上,以雷诺方程为依据,得出了空气静压导轨(圆气垫型)的气膜压力P、承载能力W等特性参数的数学模型。在此基础上,利用系统法在保证空气静压导轨具有足够能力和刚度的条件下,以最佳经济性能——空气消耗量最少为目标,对空气静压导轨的有关主要参数进行了优化。
Abstract:
By means of Raynolds formula, this article presents mathematical models used to calculate the stream compression P and the loads W etc, for aerostatic guideways. The quantity of consumed air is selected as the objective function. By using systematic method and the models, the function under a given set of conditions, such as effective loads and its rigidity, may be minimized. In this economic consideration some characteristic parameters for aerostatic guideways may be optimized

相似文献/References:

[1]赵永利,孙伟,罗欣.高强及钢纤维高强混凝土K1C、δ1C的研究[J].东南大学学报(自然科学版),1997,27(2):133.[doi:10.3969/j.issn.1001-0505.1997.02.026]
 Study on K 1C and δ 1C of HSC and SFRHSC[J].Journal of Southeast University (Natural Science Edition),1997,27(2):133.[doi:10.3969/j.issn.1001-0505.1997.02.026]
[2]张立人.钢筋混凝土双向受弯构件正截面强度计算方法的讨论(摘登)[J].东南大学学报(自然科学版),1982,12(4):146.[doi:10.3969/j.issn.1001-0505.1982.04.013]
 [J].Journal of Southeast University (Natural Science Edition),1982,12(2):146.[doi:10.3969/j.issn.1001-0505.1982.04.013]
[3]许尚贤.液体静压轴承的特性分析和优化设计[J].东南大学学报(自然科学版),1981,11(1):97.[doi:10.3969/j.issn.1001-0505.1981.01.008]
 Xu Shang-xian.Analysis and Optimum Design of Hydrostatic Bearings[J].Journal of Southeast University (Natural Science Edition),1981,11(2):97.[doi:10.3969/j.issn.1001-0505.1981.01.008]
[4]许尚贤.液体静压轴承的特性分析和优化设计[J].东南大学学报(自然科学版),1980,10(1):97.[doi:10.3969/j.issn.1001-0505.1980.01.008]
 Xu Shang-xian.Analysis and Optimum Design of Hydrostatic Bearings[J].Journal of Southeast University (Natural Science Edition),1980,10(2):97.[doi:10.3969/j.issn.1001-0505.1980.01.008]
[5]丁大钧.砖石结构设计中若干问题的商榷[J].东南大学学报(自然科学版),1980,10(2):90.[doi:10.3969/j.issn.1001-0505.1980.02.010]
 Ding Da-jun.Discussions on Some Problems in the Design of Masonry Structures[J].Journal of Southeast University (Natural Science Edition),1980,10(2):90.[doi:10.3969/j.issn.1001-0505.1980.02.010]
[6]蒋永生,蓝宗建,冯纪寅.钢筋混凝土框架节点梁端抗震性能的试验研究[J].东南大学学报(自然科学版),1980,10(4):32.[doi:10.3969/j.issn.1001-0505.1980.04.004]
 Jiang Yong-sheng,Lan Zong-jian,Feng Ji-yin.An Experimental Study of Aseismic Behavior at Beam Ends of Reinforced Concrete Frame Joints[J].Journal of Southeast University (Natural Science Edition),1980,10(2):32.[doi:10.3969/j.issn.1001-0505.1980.04.004]
[7]丁大钧.钢筋混凝土受压构件的纵向弯曲[J].东南大学学报(自然科学版),1979,9(2):49.[doi:10.3969/j.issn.1001-0505.1979.02.005]
 Ding Da-Jun.Longitudinal Bending of Reinforced Concrete Compressive Members[J].Journal of Southeast University (Natural Science Edition),1979,9(2):49.[doi:10.3969/j.issn.1001-0505.1979.02.005]
[8].齿槽式梁柱接头受力性能及计算方法的研究[J].东南大学学报(自然科学版),1978,8(2):69.[doi:10.3969/j.issn.1001-0505.1978.02.006]
 [J].Journal of Southeast University (Natural Science Edition),1978,8(2):69.[doi:10.3969/j.issn.1001-0505.1978.02.006]
[9]黄家贤,叶琪根,朱逢时.精密工作台空气静压导轨静刚度参数的试验研究[J].东南大学学报(自然科学版),1983,13(4):31.[doi:10.3969/j.issn.1001-0505.1983.04.003]
 Huang Jia-Xian,Yie Qi-geng,and Zhu Fong-shi.An Experimental Investigation on Parameters Affecting the Static Rigidity of Aerostatic Guide Rails of a Precision Table[J].Journal of Southeast University (Natural Science Edition),1983,13(2):31.[doi:10.3969/j.issn.1001-0505.1983.04.003]

更新日期/Last Update: 2013-05-01