[1]王佩纶.有限元法在航空显象管玻壳设计中应用[J].东南大学学报(自然科学版),1986,16(2):10-19.[doi:10.3969/j.issn.1001-0505.1986.02.002]
　Wang Peilun.Application of the FEM Method to the Design of the Glass Shell of Aviation Picture Tube[J].Journal of Southeast University (Natural Science Edition),1986,16(2):10-19.[doi:10.3969/j.issn.1001-0505.1986.02.002]
点击复制

有限元法在航空显象管玻壳设计中应用()
分享到：

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
16
期数:
1986年第2期
页码:
10-19
栏目:
本刊信息
出版日期:
1986-03-20

文章信息/Info

Title:
Application of the FEM Method to the Design of the Glass Shell of Aviation Picture Tube
作者:
王佩纶
南京工学院数学力学系 副教授
Author(s):
Wang Peilun
关键词:
有限元法;  玻壳模具;  显象管;  计算公式;  有限元方法;  设计要求;  航空;  设计方法;  生产周期;  应力分布
分类号:
+
DOI:
10.3969/j.issn.1001-0505.1986.02.002
摘要:
本文讨论有限元法在航空显象管玻壳设计中应用,同时给出计算玻壳外形的公式。与传统的设计方法相比,它具有生产周期短、成本低的优点,通过玻壳的设计与制造其优点得到了证实。玻壳成品的引爆试验完全符合对壳体所作的理论分析。
Abstract:
This paper discusses the application of the finite element method to the design of the glass shell of aviation picture tube and gives the theoretical formulae for calculating the shell geometry.Comparing with the conventional design method,it possesses the advantages of the short time and low cost of the production.In order to verify these advantages,an aviation glass shell is designed and manufactured.Theoretical analysis coincides with the results of the UL test.

相似文献/References:

[1]周平,徐金平.求解电磁场有限元-边界元方程组的有效方法[J].东南大学学报(自然科学版),2005,35(3):343.[doi:10.3969/j.issn.1001-0505.2005.03.005]
　Zhou Ping,Xu Jinping.Method for solving linear equations of hybrid finite element-boundary element method for EM problems[J].Journal of Southeast University (Natural Science Edition),2005,35(2):343.[doi:10.3969/j.issn.1001-0505.2005.03.005]
[2]汤进龙,洪伟.外推技术及其在金属衬底介质片对平面波反射分析中的应用[J].东南大学学报(自然科学版),2003,33(3):253.[doi:10.3969/j.issn.1001-0505.2003.03.002]
　Tang Jinlong,Hong Wei.Application of extrapolation technique in reflecting analysis of a dielectric patch with metal underlay for plane waves[J].Journal of Southeast University (Natural Science Edition),2003,33(2):253.[doi:10.3969/j.issn.1001-0505.2003.03.002]
[3]唐伯明,邓学钧.刚性路面接缝传荷能力的评定与分析——FWD开发应用研究[J].东南大学学报(自然科学版),1991,21(6):84.[doi:10.3969/j.issn.1001-0505.1991.06.013]
　Tan9 Botming,Deng Xuejun,Deng Xuejun.Assessement of Load Transfer Across Joints in Rigid Pavements Using the FWD[J].Journal of Southeast University (Natural Science Edition),1991,21(2):84.[doi:10.3969/j.issn.1001-0505.1991.06.013]
[4]蒋全,周鹗.有限元法中处理周期性条件的统一公式[J].东南大学学报(自然科学版),1990,20(3):32.[doi:10.3969/j.issn.1001-0505.1990.03.006]
　General Formulae for Processing Periodic Conditions in Finite Element Method[J].Journal of Southeast University (Natural Science Edition),1990,20(2):32.[doi:10.3969/j.issn.1001-0505.1990.03.006]
[5]王玉民,王顺玉,余颖禾.碱熔锅非线性温度场及热应力分析[J].东南大学学报(自然科学版),1988,18(5):109.[doi:10.3969/j.issn.1001-0505.1988.05.016]
　Wang Yumin Wang Shunyu She Yinghe(Department of Mathematics and Mechanics).Non-linear Thermal and Stress Field in Alkali Melting Kattles[J].Journal of Southeast University (Natural Science Edition),1988,18(2):109.[doi:10.3969/j.issn.1001-0505.1988.05.016]

更新日期/Last Update: 2013-05-01