[1]邱成悌,谢德仁.10kw热管—散热器的研制[J].东南大学学报(自然科学版),1986,16(4):76-85.[doi:10.3969/j.issn.1001-0505.1986.04.010]
 Qiu Chengti,Xie Deren.10kW Heat Pipe—Heat Sink Development[J].Journal of Southeast University (Natural Science Edition),1986,16(4):76-85.[doi:10.3969/j.issn.1001-0505.1986.04.010]
点击复制

10kw热管—散热器的研制()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
16
期数:
1986年第4期
页码:
76-85
栏目:
本刊信息
出版日期:
1986-07-20

文章信息/Info

Title:
10kW Heat Pipe—Heat Sink Development
作者:
邱成悌谢德仁
南京工学院机械工程系
Author(s):
Qiu Chengti Xie Deren
Department of Mechanical Engineering
关键词:
冷却技术 电子设备 热管 散热器
Keywords:
coolig technique electronic equipment heat pipe heat sink
分类号:
+
DOI:
10.3969/j.issn.1001-0505.1986.04.010
摘要:
本文介绍应用热管原理,设计用于冷却10kW速调管的热管—散热器。采用径向热管和紧凑散热器,并利用计算机对紧凑散热器进行了优化设计。为了考验热管的性能和寿命,除了进行一般的性能试验外,还在5kW左右条件下进行1154小时的寿命试验,结果表明热管—散热器性能可靠。计算结果和实测数据具有良好的一致性。
Abstract:
A design of heat pipe with heat sink for cooling 10kW klystron is presented. The radial heat pipe with heat sink is adopted and the later is optimized by computer for its minimum weight. In order to find its performance and life, the life testing is made and lasted for 1154 hours under the dissipated 5kW condition in addition to the traditional performance testing. The results obtained show that this heat pipe with heat sink is reliable, and with which the calculation results are consistent.

相似文献/References:

[1]林鹤云,郭玉敬,孙蓓蓓,等.海上风电的若干关键技术综述[J].东南大学学报(自然科学版),2011,41(4):882.[doi:10.3969/j.issn.1001-0505.2011.04.042]
 Lin Heyun,Guo Yujing,Sun Beibei,et al.Overview of offshore wind power key technologies[J].Journal of Southeast University (Natural Science Edition),2011,41(4):882.[doi:10.3969/j.issn.1001-0505.2011.04.042]

更新日期/Last Update: 2013-05-01