[1]宋启根.正交异性单向支承板的实用计算[J].东南大学学报(自然科学版),1988,18(1):1-13.[doi:10.3969/j.issn.1001-0505.1988.01.001]
 Song Qigen (Department of Civil Engineering).Practical Analysis of Orthotropic Plates Supported in One Direction[J].Journal of Southeast University (Natural Science Edition),1988,18(1):1-13.[doi:10.3969/j.issn.1001-0505.1988.01.001]
点击复制

正交异性单向支承板的实用计算()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
18
期数:
1988年第1期
页码:
1-13
栏目:
本刊信息
出版日期:
1988-01-20

文章信息/Info

Title:
Practical Analysis of Orthotropic Plates Supported in One Direction
作者:
宋启根
南京工学院土木工程系
Author(s):
Song Qigen (Department of Civil Engineering)
关键词:
板体结构 应力分析 正交异性板 桥梁结构 码头
Keywords:
plate structures stress analysis orthotropic plates bridge structures pier
分类号:
+
DOI:
10.3969/j.issn.1001-0505.1988.01.001
摘要:
本文提出单向矩形正交异性板(同性板为特例)的实用计算方法。支承条件可以为两边简支、连续或不对称支承而其它两对边则可为滑支或自由。得出集中荷载作用点或矩形均布荷载中心所在的横截面上弯矩的实用计算公式。论证了这些公式的适用范围和精度,并与级数解或有限元法的计算结果作了充分的比较和验证。
Abstract:
A practical method for computing the one-way rectangular orthotropic plates(isotropic plate as a special case)is suggested in this paper.The supported conditions in two opposite edges may be simply supported,continu- ous or supported nonsymmetrically and the other two opposite edges are slide- supported or free.A series of simplified formulas are given for calculating the bending moments along the cross section in which the acting point of the concentrated load or the center of a rectangular uniform load is located.The valid range and accuracy of these formulas were studied and the approximate results were examined and compared extensively with those by the triangular series solution or finite element method.

相似文献/References:

[1]刘毅,李爱群,丁幼亮,等.润扬悬索桥扁平钢箱梁局部应力的测试与分析[J].东南大学学报(自然科学版),2007,37(2):275.[doi:10.3969/j.issn.1001-0505.2007.02.018]
 Liu Yi,Li Aiqun,Ding Youliang,et al.Computational and experimental studies on stress analysis of flat steel-box-girder of Runyang Suspension Bridge[J].Journal of Southeast University (Natural Science Edition),2007,37(1):275.[doi:10.3969/j.issn.1001-0505.2007.02.018]
[2]雷国辉,王轩,雷国刚.矩形槽开挖失稳滑动体形状及整体稳定分析[J].东南大学学报(自然科学版),2006,36(1):102.[doi:10.3969/j.issn.1001-0505.2006.01.021]
 Lei Guohui,Wang Xuan,Lei Guogang,et al.Sliding wedge shape and analysis method of global stability of rectangular excavated trenches[J].Journal of Southeast University (Natural Science Edition),2006,36(1):102.[doi:10.3969/j.issn.1001-0505.2006.01.021]
[3]余焜,瞿光汝.有关金属表层X射线应力分析的讨论[J].东南大学学报(自然科学版),1993,23(5):71.[doi:10.3969/j.issn.1001-0505.1993.05.011]
 Yu Kun,Qu Guagru.Some Discussions on Metal X-Ray Macrostress Measurement[J].Journal of Southeast University (Natural Science Edition),1993,23(1):71.[doi:10.3969/j.issn.1001-0505.1993.05.011]

更新日期/Last Update: 2013-04-30