[1]刘传博,苏华钦.蘑菇顶硅质球式热风炉的设计与应用研究[J].东南大学学报(自然科学版),1989,19(3):49-53.[doi:10.3969/j.issn.1001-0505.1989.03.007]
 Liu Chuanbo (Department of Material Science and Engineering)Su Huaqin (Department of Mechanical Engineering).Design and Experimental Study of Silica Spheroid-bed Hot Blast Stove with Mushroom Top[J].Journal of Southeast University (Natural Science Edition),1989,19(3):49-53.[doi:10.3969/j.issn.1001-0505.1989.03.007]
点击复制

蘑菇顶硅质球式热风炉的设计与应用研究()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
19
期数:
1989年第3期
页码:
49-53
栏目:
本刊信息
出版日期:
1989-05-20

文章信息/Info

Title:
Design and Experimental Study of Silica Spheroid-bed Hot Blast Stove with Mushroom Top
作者:
刘传博苏华钦
东南大学材料科学与工程系; 东南大学机械工程系
Author(s):
Liu Chuanbo (Department of Material Science and Engineering)Su Huaqin (Department of Mechanical Engineering)
关键词:
热风炉 耐火浇注料/球床 热风温度
Keywords:
hot-air furnces fire-proof concrete/spheroid-bed hot blast temperature
分类号:
+
DOI:
10.3969/j.issn.1001-0505.1989.03.007
摘要:
本文叙述在小型高炉上使用硅质球式热风炉的应用.热风炉内壁采用硅质混凝土,耐火球采用φ45mm 的硅质球.在冶金工厂的运行表明:热风温度为1040~1150℃,最高热风温度达1280℃.研究表明:硅质球式热风炉提高热风温度200~300℃,降低了焦比,增加了产量.
Abstract:
In this paper,the study of silica spheroid-bed hot blast stove for small blast furnace is described.The inwall of the stove is made of silica concrete and the refractory bails are 45mm in diameter.The operational res- ults in a metallurgical factory indicated that the hot blast temperature is 1040~ 1150℃ and the highest hot blast temperature is 1280℃,it shows that the hot blast temperature in the silica spheroid-bed hot blast stove is increased by 200~ 300℃,the coke ratio is reduced and the outputs increase.
更新日期/Last Update: 2013-04-30