[1]李立源,陈维南.刺绣画稿自动生成系统[J].东南大学学报(自然科学版),1996,26(2):68-73.[doi:10.3969/j.issn.1001-0505.1996.02.011]
 Li Liyuan,Chen Weinan.[J].Journal of Southeast University (Natural Science Edition),1996,26(2):68-73.[doi:10.3969/j.issn.1001-0505.1996.02.011]
点击复制

刺绣画稿自动生成系统()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
26
期数:
1996年第2期
页码:
68-73
栏目:
其他
出版日期:
1996-03-20

文章信息/Info

作者:
李立源陈维南
东南大学自动化研究所
Author(s):
Li Liyuan; Chen Weinan
Research Institute of Automation,Southeast University, Nanjing 210018
关键词:
计算机辅助设计 图像处理 计算机图形学 刺绣
分类号:
TS935.2
DOI:
10.3969/j.issn.1001-0505.1996.02.011
摘要:
本文介绍的刺绣画稿自动生成系统,采用摄像机、扫描仪将图片、画稿、实物、人体等的图像输入计算机,经图像处理、图形修正及画稿编辑等处理,直接生成适合于编针系统使用的刺绣画稿文件,从而改变了传统刺绣画稿人工生产的生成工艺,可使刺绣画稿的创作达到自动化的生产水平..

相似文献/References:

[1]盖绍彦,达飞鹏,杨伟光.一种新的用于光学测量的圆点检测算法[J].东南大学学报(自然科学版),2010,40(2):326.[doi:10.3969/j.issn.1001-0505.2010.02.021]
 Gai Shaoyan,Da Feipeng,Yang Weiguang.New method for circle detection in optical measurement[J].Journal of Southeast University (Natural Science Edition),2010,40(2):326.[doi:10.3969/j.issn.1001-0505.2010.02.021]
[2]王琦龙,李晓华,雷威,等.光点测试中的光点修复方法研究[J].东南大学学报(自然科学版),2004,34(2):194.[doi:10.3969/j.issn.1001-0505.2004.02.012]
 Wang Qilong,Li Xiaohua,Lei Wei,et al.Restoration of spot in precise spot measurement[J].Journal of Southeast University (Natural Science Edition),2004,34(2):194.[doi:10.3969/j.issn.1001-0505.2004.02.012]
[3]李久贤,孙伟,夏良正.一种新的模糊对比度增强算法[J].东南大学学报(自然科学版),2004,34(5):675.[doi:10.3969/j.issn.1001-0505.2004.05.025]
 Li Jiuxian,Sun Wei,Xia Liangzheng.Novel fuzzy contrast enhancement algorithm[J].Journal of Southeast University (Natural Science Edition),2004,34(2):675.[doi:10.3969/j.issn.1001-0505.2004.05.025]
[4]叶桦,章国宝,陈维南.基于小波变换的纹理图像分割[J].东南大学学报(自然科学版),1999,29(1):44.[doi:10.3969/j.issn.1001-0505.1999.01.009]
 Ye Hua,Zhang Guobao,Chen Weinan.Texture Segmentation Using Wavelet Filters[J].Journal of Southeast University (Natural Science Edition),1999,29(2):44.[doi:10.3969/j.issn.1001-0505.1999.01.009]
[5]谢叻,周来水,周儒荣.复杂型腔的余料加工方法[J].东南大学学报(自然科学版),1999,29(3):63.[doi:10.3969/j.issn.1001-0505.1999.03.012]
 Xie Le,Zhou Laishui,Zhou Rurong.A Algorithm of NC Mill for Complex Shape Pocket[J].Journal of Southeast University (Natural Science Edition),1999,29(2):63.[doi:10.3969/j.issn.1001-0505.1999.03.012]
[6]张继彬,陆勇,钟文琪,等.颗粒相运动参数的光纤式高速摄影测量方法[J].东南大学学报(自然科学版),2012,42(5):910.[doi:10.3969/j.issn.1001-0505.2012.05.021]
 Zhang Jibin,Lu Yong,Zhong Wenqi,et al.Measurement method of particle phase motion parameter based on fiber high speed photography[J].Journal of Southeast University (Natural Science Edition),2012,42(2):910.[doi:10.3969/j.issn.1001-0505.2012.05.021]
[7]黄学军,娄维鸿,马江镭,等.TE11○-TE11△ 模式变换器的计算机辅助设计[J].东南大学学报(自然科学版),1997,27(4):53.[doi:10.3969/j.issn.1001-0505.1997.04.010]
 Huang Xuejun,Lou Weihong,Ma Jianglei,et al.Computer Aided Design of TE ○ 11 TE  11 Mode Converter[J].Journal of Southeast University (Natural Science Edition),1997,27(2):53.[doi:10.3969/j.issn.1001-0505.1997.04.010]
[8]诸锡祺,唐寅,聂清荣.基于成组技术的CAD系统及其与CAPP集成[J].东南大学学报(自然科学版),1995,25(5):103.[doi:10.3969/j.issn.1001-0505.1995.05.018]
 Zu Xiqi,Tang,Yin,et al.A CAD System Based on Group Technology and Integration with CAPP[J].Journal of Southeast University (Natural Science Edition),1995,25(2):103.[doi:10.3969/j.issn.1001-0505.1995.05.018]
[9]曾庆辉,梅群欢.小型CAD数据库的一种实现方案[J].东南大学学报(自然科学版),1991,21(1):78.[doi:10.3969/j.issn.1001-0505.1991.01.012]
 Zeng Qinghui,Mei Qunhuan.Scheme for Realizing Datahase in Small CAD System[J].Journal of Southeast University (Natural Science Edition),1991,21(2):78.[doi:10.3969/j.issn.1001-0505.1991.01.012]
[10]许尚贤,陈宝生.静压轴承计算机辅助设计[J].东南大学学报(自然科学版),1988,18(4):66.[doi:10.3969/j.issn.1001-0505.1988.04.009]
 Xu Shangxian Chen Baosheng(Department of Mechanical Engineering).Computer-Aided Design of Hydrostatic Bearings[J].Journal of Southeast University (Natural Science Edition),1988,18(2):66.[doi:10.3969/j.issn.1001-0505.1988.04.009]

备注/Memo

备注/Memo:
江苏省八五重点攻关项目
更新日期/Last Update: 2013-04-14