参考文献/References:
[1] Lesuer D R ,Kipouros G T.Lightweight materials for transportation applications.JOM,1995,7 :17～20
[2] Robert E B.53rd annual world magnesium conference.Light Metal Age ,1996,54(7-8):50～56
[3] Ninomiya R,Ojtro T,Kubota K.Improved heat resistance of Mg-Al alloys by the Ca addition.Acta Metall Mater,1995,43(2):669～671
[4] 《有色金属及其热处理》编写组.有色金属及其热处理.北京:国防工业出版社,1981.147～164
[5] Luo A,Pekguleryuz M O.Cast magnesium alloys for elevated temperature applications.J Mater Sci,1994,29:5259～5265
[6] [美]布鲁克斯 C R.有色合金的热处理、组织与性能.丁夫等译.北京:冶金工业出版社,1988.285～294
[ 7] 虞觉奇,易文质,陈邦迪等.二元合金状态图.上海:上海科学技术出版社,1981.230
相似文献/References:
[1]江心怡,薛烽,赵阔.Mg-Al-RE系镁合金组织与性能[J].东南大学学报(自然科学版),2010,40(3):646.[doi:10.3969/j.issn.1001-0505.2010.03.040]
Jiang Xinyi,Xue Feng,Zhao Kuo.Microstructures and mechanical properties of Mg-Al-RE alloys[J].Journal of Southeast University (Natural Science Edition),2010,40(3):646.[doi:10.3969/j.issn.1001-0505.2010.03.040]
[2]程洁,周啸,李俐军,等.冠脉支架的多功能体外力学性能测试装置及实验研究[J].东南大学学报(自然科学版),2010,40(2):341.[doi:10.3969/j.issn.1001-0505.2010.02.024]
Cheng Jie,Zhou Xiao,Li Lijun,et al.In-vitro test apparatus and experimental study of mechanics properties of coronary stents[J].Journal of Southeast University (Natural Science Edition),2010,40(3):341.[doi:10.3969/j.issn.1001-0505.2010.02.024]
[3]吴晓婧,薛烽,周健,等.Cu,Ni对Sn-Zn-Al无铅焊料组织和性能的影响[J].东南大学学报(自然科学版),2009,39(3):623.[doi:10.3969/j.issn.1001-0505.2009.03.038]
Wu Xiaojing,Xue Feng,Zhou Jian,et al.Effect of Cu and Ni on microstructure and properties of Sn-Zn-Al lead-free solders[J].Journal of Southeast University (Natural Science Edition),2009,39(3):623.[doi:10.3969/j.issn.1001-0505.2009.03.038]
[4]周健,王常亮,薛烽.Sn-Zn钎料Cu接头的界面反应及力学性能[J].东南大学学报(自然科学版),2009,39(3):615.[doi:10.3969/j.issn.1001-0505.2009.03.037]
Zhou Jian,Wang Changliang,Xue Feng.Interfacial reaction and joint strength of Sn-Zn solder/Cu[J].Journal of Southeast University (Natural Science Edition),2009,39(3):615.[doi:10.3969/j.issn.1001-0505.2009.03.037]
[5]张秀芝,孙伟,张倩倩,等.混杂钢纤维增强超高性能水泥基材料力学性能分析[J].东南大学学报(自然科学版),2008,38(1):156.[doi:10.3969/j.issn.1001-0505.2008.01.030]
Zhang Xiuzhi,Sun Wei,Zhang Qianqian,et al.Mechanical behaviors of hybrid steel fiber reinforced ultra-high performance cementitious composites[J].Journal of Southeast University (Natural Science Edition),2008,38(3):156.[doi:10.3969/j.issn.1001-0505.2008.01.030]
[6]付小琴,周健,孙扬善,等.Sn-8Zn-3Bi-P无铅钎料微观组织及性能[J].东南大学学报(自然科学版),2006,36(5):831.[doi:10.3969/j.issn.1001-0505.2006.05.030]
Fu Xiaoqin,Zhou Jian,Sun Yangshan,et al.Effect of phosphorus on microstructure and properties of Sn-8Zn-3Bi lead-free solder[J].Journal of Southeast University (Natural Science Edition),2006,36(3):831.[doi:10.3969/j.issn.1001-0505.2006.05.030]
[7]左晓宝,等.一种超弹性SMA复合阻尼器的设计与试验[J].东南大学学报(自然科学版),2004,34(4):459.[doi:10.3969/j.issn.1001-0505.2004.04.009]
Zuo Xiaobao,Li Aiqun,et al.Design and experimental investigation of superelastic SMA damper[J].Journal of Southeast University (Natural Science Edition),2004,34(3):459.[doi:10.3969/j.issn.1001-0505.2004.04.009]
[8]魏宇,孙扬善,樊泉,等.TiC强化Cr12MoV基复合材料的组织和性能分析[J].东南大学学报(自然科学版),2003,33(4):463.[doi:10.3969/j.issn.1001-0505.2003.04.020]
Wei Yu,Sun Yangshan,Fan Quan,et al.Microstructure and mechanical properties of TiC reinforced Cr12MoV composite[J].Journal of Southeast University (Natural Science Edition),2003,33(3):463.[doi:10.3969/j.issn.1001-0505.2003.04.020]
[9]闵学刚,孙扬善,杜温文,等.Ca,Si和RE对AZ91合金的组织和性能的影响[J].东南大学学报(自然科学版),2002,32(3):409.[doi:10.3969/j.issn.1001-0505.2002.03.022]
Min Xuegang,Sun Yangshan,Du Wenwen,et al.Effects of Ca,Si and RE additions on the microstructures and mechanical properties of AZ91 based alloys[J].Journal of Southeast University (Natural Science Edition),2002,32(3):409.[doi:10.3969/j.issn.1001-0505.2002.03.022]
[10]杨春,蔡健,张学文,等.劲性钢管混凝土组合柱轴压性能试验研究[J].东南大学学报(自然科学版),2002,32(5):715.[doi:10.3969/j.issn.1001-0505.2002.05.008]
Yang Chun,Cai Jian,Zhang Xuewen,et al.Experimental research on the composite column with cone of concrete filled steel tube under axial loads[J].Journal of Southeast University (Natural Science Edition),2002,32(3):715.[doi:10.3969/j.issn.1001-0505.2002.05.008]