[1]汪晓虹,周传荣,徐庆华.结构分析模型的修正与振型扩充技术[J].东南大学学报(自然科学版),2000,30(2):143-147.[doi:10.3969/j.issn.1001-0505.2000.02.030]
 Wang Xiaohong,Zhou Chuanrong,Xu Qinghua.Structural Analytical Model Updating and Mode Shape Expansion Techniques[J].Journal of Southeast University (Natural Science Edition),2000,30(2):143-147.[doi:10.3969/j.issn.1001-0505.2000.02.030]
点击复制

结构分析模型的修正与振型扩充技术()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
30
期数:
2000年第2期
页码:
143-147
栏目:
数学、物理学、力学
出版日期:
2000-03-19

文章信息/Info

Title:
Structural Analytical Model Updating and Mode Shape Expansion Techniques
作者:
汪晓虹 周传荣 徐庆华
南京航空航天大学, 南京 210016
Author(s):
Wang Xiaohong Zhou Chuanrong Xu Qinghua
Nanjing University of Aeronautics and Astronautics, Nanjing 210016
关键词:
结构分析模型 固有频率 振型 振型扩充 最优化方法
Keywords:
structural analytical model natural frequencies modes mode shape expansion optimization
分类号:
O327;V214.19
DOI:
10.3969/j.issn.1001-0505.2000.02.030
摘要:
在利用实测的结构动态特性修正结构分析模型中,针对实测低阶固有频率,固有振型含有测量误差, 造成结构特征方程不适定性的问题,以及实测振型的坐标数比分析模型指定的坐标数少的问题, 本文给出了直接利用结构的特征方程,修改结构分析模型和振型扩充的方法.通过实例对方法的可靠性、有效性进行了验证.
Abstract:
In accordance with these problems that the structural natural frequencies and modes from vibration test data involves errors, and the number of measured modes coordinates is less than the number of degrees of freedom specified in the analytical model. In this paper, the methods of the correcting analytical model and the expanding mode shape are presented which uses measured normal modes and natural frequencies to update the design variables from the structural eigenequation. Numerical results are given to illustrate the arguments developed.

参考文献/References:

[1] Golub G H,Van Loan C F.Matrix computations.Baltiomore:The Johns Hopkins University Press,1983.414~424
[2] Hansen P C.The truncated SVD as an method for regularization.BIT,1987,27:534~553
[3] Chan T F,Hansen P C.Computing truncated SVD least squares solutions by rank revealing QR factorizations.SIAM J SCI Statist Comput,1990,11:519~530
[4] 汪晓虹,周传荣.计算大型实对称广义特征值问题的Lanczos-QR分解混合方法.南京航空航天大学学报,1998,30(5):501~506
[5] 袁亚湘,孙文瑜.最优化方法.北京:科学技术出版社,1997.559~569
[6] 汪晓虹,周传荣.平面桁架结构逆特征值问题的解法.应用力学学报,1998,15(2):119~122
[7] Kammer D C,Test-analysis model development using an exact modal reduction.The International Journal of Analytical and Experimental Modal Analysis,1987 (10):174~179
[8] 吕炯兴,汪晓虹.矩阵方程ABX-CXD=E的数值解法.计算物理,1992,9(4):451~454

相似文献/References:

[1]莫岳平,胡敏强,金龙,等.剪切变形与转动惯量对超声波电机振动特性的影响[J].东南大学学报(自然科学版),2007,37(1):56.[doi:10.3969/j.issn.1001-0505.2007.01.013]
 Mo Yueping,Hu Minqiang,Jin Long,et al.Effect of shear deformation and rotatory inertia on vibration characteristics of ultrasonic motor[J].Journal of Southeast University (Natural Science Edition),2007,37(2):56.[doi:10.3969/j.issn.1001-0505.2007.01.013]
[2]王兴松.带载柔性机械臂固有频率确定及其减振器设计[J].东南大学学报(自然科学版),1997,27(5):6.[doi:10.3969/j.issn.1001-0505.1997.05.002]
 Wang Xingsong.Calculation of the Eigen Frequences and Designing of the Absorbers of a Flexible Beam with Tip Mass[J].Journal of Southeast University (Natural Science Edition),1997,27(2):6.[doi:10.3969/j.issn.1001-0505.1997.05.002]
[3]胡乾善.振动系统力学模型的建立与改进问题[J].东南大学学报(自然科学版),1986,16(2):1.[doi:10.3969/j.issn.1001-0505.1986.02.001]
 Hu Qianshan.The Problem of Modeling Vibration Systems and Model Improvement[J].Journal of Southeast University (Natural Science Edition),1986,16(2):1.[doi:10.3969/j.issn.1001-0505.1986.02.001]
[4]孙庆鸿,张思,霍少成.脉冲激振法用于机床模态分析的研究[J].东南大学学报(自然科学版),1985,15(3):67.[doi:10.3969/j.issn.1001-0505.1985.03.009]
 Sun Qinghong Zhang Si Huo Shaocheng.Application of Impulse Excitation Method to Machine Tool Modal Analysis[J].Journal of Southeast University (Natural Science Edition),1985,15(2):67.[doi:10.3969/j.issn.1001-0505.1985.03.009]
[5]胡乾善.振动系统模态分析的时域技术[J].东南大学学报(自然科学版),1982,12(2):1.[doi:10.3969/j.issn.1001-0505.1982.02.001]
 Hu Qian-shan.The Time-Domain Technique of Modal Analysis of Vibration Systems[J].Journal of Southeast University (Natural Science Edition),1982,12(2):1.[doi:10.3969/j.issn.1001-0505.1982.02.001]
[6]赵芝眉,谢锡俊.平面磨削测力仪的研制[J].东南大学学报(自然科学版),1981,11(2):69.[doi:10.3969/j.issn.1001-0505.1981.02.008]
 Zhao Zhi-mei,Xie Xi-jun.Study of Dynamometer for Surface Grinding[J].Journal of Southeast University (Natural Science Edition),1981,11(2):69.[doi:10.3969/j.issn.1001-0505.1981.02.008]
[7]薛祖卫.矩阵理论和插值法在圆拱固有振动中的应用[J].东南大学学报(自然科学版),1981,11(4):124.[doi:10.3969/j.issn.1001-0505.1981.04.012]
 Shue Tsu-wei.Application of the Theory of Matrix and Interpolation to the Natural Vibration of the Circular Arches[J].Journal of Southeast University (Natural Science Edition),1981,11(2):124.[doi:10.3969/j.issn.1001-0505.1981.04.012]
[8]温文源,葛巧琴,虞尔九,等.机床结构件振动特性的有限元法计算研究[J].东南大学学报(自然科学版),1980,10(1):80.[doi:10.3969/j.issn.1001-0505.1980.01.007]
 Wen Wen-yuan Ge Qiao-qin Yu Er-jiu Pao Xin-lu.Computations by Finite Element Method for Vibration Analysis of Machine Tool Structures[J].Journal of Southeast University (Natural Science Edition),1980,10(2):80.[doi:10.3969/j.issn.1001-0505.1980.01.007]
[9]汪晓虹,周传荣.组合桁架结构动力学优化设计及模态综合[J].东南大学学报(自然科学版),1999,29(2):139.[doi:10.3969/j.issn.1001-0505.1999.02.027]
 Wang Xiaohong,Zhou Chuanrong.Optimal Dynamics Design and Modal Synthesis of Combined Tress Structure[J].Journal of Southeast University (Natural Science Edition),1999,29(2):139.[doi:10.3969/j.issn.1001-0505.1999.02.027]
[10]温文源,葛巧琴,虞尔九,等.机床结构件振动特性的有限元法计算研究[J].东南大学学报(自然科学版),1981,11(1):80.[doi:10.3969/j.issn.1001-0505.1981.01.007]
 Wen Wen-yuan Ge Qiao-qin Yu Er-jiu Pao Xin-lu.Computations by Finite Element Method for Vibration Analyses of Machine TooI Structures[J].Journal of Southeast University (Natural Science Edition),1981,11(2):80.[doi:10.3969/j.issn.1001-0505.1981.01.007]

备注/Memo

备注/Memo:
第一作者:女,1955年生, 博士,副教授.
更新日期/Last Update: 2000-03-20