[1]唐寅,易红.冲压加工中薄板零件夹持与操纵的研究[J].东南大学学报(自然科学版),2000,30(3):61-64.[doi:10.3969/j.issn.1001-0505.2000.03.013]
　Tang Yin,Yi Hong.Study and Modeling of Sheet Metal Handling for Stamping Line[J].Journal of Southeast University (Natural Science Edition),2000,30(3):61-64.[doi:10.3969/j.issn.1001-0505.2000.03.013]
点击复制

冲压加工中薄板零件夹持与操纵的研究()
分享到：

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
30
期数:
2000年第3期
页码:
61-64
栏目:
材料科学与工程
出版日期:
2000-05-20

文章信息/Info

Title:
Study and Modeling of Sheet Metal Handling for Stamping Line
作者:
唐寅;  易红
东南大学机械工程系, 南京 210096
Author(s):
Tang Yin;  Yi Hong
Department of Mechanical Engineering, Southeast University, Nanjing 210096
关键词:
冲压;  金属薄板;  物料搬运
Keywords:
stamping;  sheet metal;  material handling
分类号:
TG382
DOI:
10.3969/j.issn.1001-0505.2000.03.013
摘要:
在冲压行业中,金属薄板的不合理夹持与操纵将会影响到产品质量和生产率.本文对金属薄板零件的夹持与操纵进行了研究,提出了夹持点位置的优化方法,为金属薄板零件的夹持设计提供了依据.
Abstract:
In sheet metal stamping line, unreasonable handling of compliant part will causes quality problem and low production through put. In this paper the author studied the sheet metal part handling and put forward the methodology of optimal design for sheet metal handling, which could be used as guideline in stamping.

参考文献/References:

[1] Asada H,By A.Kinematic analysis of workpart fixturing for flexible assembly with automatically reconfigurable fixtures.IEEE Journal of Robotics and Automation,1985,RA-1,(2):86～94
[2] Cai W.Deformable sheet metal fixturing:principles,algorithms,and simulations.Transaction of the ASME,Journal of Manufacturing Science and Engineering,1996,118:318～324
[3] Suri R,Desiraju R.Performance analysis of flexible manufacturing systems with a single discrete material-handling device.International Journal of Flexible Manufacturing Systems,1997,9:223～249

备注/Memo

备注/Memo:
第一作者:男, 1963年生, 副教授.
更新日期/Last Update: 2000-05-20