[1]朱光灿,孙毅,吕锡武.附着缺氧-好氧生物膜工艺处理聚酯废水的研究[J].东南大学学报(自然科学版),2000,30(4):81-84.[doi:10.3969/j.issn.1001-0505.2000.04.016]
　Zhu Guangcan,Sun Yi,Lü Xiwu.Treatment of Polyester Wastewater with Attached Anoxic-Oxic Biological Film Process[J].Journal of Southeast University (Natural Science Edition),2000,30(4):81-84.[doi:10.3969/j.issn.1001-0505.2000.04.016]
点击复制

附着缺氧-好氧生物膜工艺处理聚酯废水的研究()
分享到：

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
30
期数:
2000年第4期
页码:
81-84
栏目:
环境科学与工程
出版日期:
2000-07-20

文章信息/Info

Title:
Treatment of Polyester Wastewater with Attached Anoxic-Oxic Biological Film Process
作者:
朱光灿1;  孙毅2;  吕锡武1
1 东南大学土木工程学院,南京 210096; 2 东南大学建筑设计研究院,南京 210096
Author(s):
Zhu Guangcan1;  Sun Yi2;  Lü Xiwu1
1 College of Civil Engineering, Southeast University, Nanjing 210096
2 Architectural Design and Research Institute, Southeast University, Nanjing 210096
关键词:
附着生物膜;  缺氧-好氧工艺;  聚酯废水;  废水处理
Keywords:
attached biological film;  anoxic-oxic process;  polyester wastewater;  wastewater treatment
分类号:
X783.1
DOI:
10.3969/j.issn.1001-0505.2000.04.016
摘要:
研究了附着缺氧-好氧生物膜工艺处理聚酯废水的影响因素及效率.结果表明:当进水重铬酸钾化学耗氧量低于1 400 mg/L,其缺氧段有机负荷小于3.36 kg/(m3·d),总停留时间为18 h时,重铬酸钾化学耗氧量去除率大于90%.工艺中缺氧段有效地提高废水的可生化性,丰富的生物相及生物量增强了系统耐冲击负荷的能力.
Abstract:
The influencing factors and efficiency are studied when the process of attached anoxic-oxic biological film process is applied to the treatment of polyester wastewater. When the CODCr of influent is lower than 1 400 mg/L, organic load of anoxic zone is less than 3.36 kg/(m3·d) and total HRT is 18 h, the removal rate of CODCr is above 90%. The anoxic zone improves the biodegradability of pollutants effectively and plenty of microorganisms enhance the durability against shock loading.

参考文献/References:

[1] 王凯军.厌氧(水解)-好氧处理工艺的理论与实践.中国环境科学,1998,18(4):337～340
[2] 余淦申编著.生物接触氧化处理废水技术.北京:中国环境科学出版社,1992.20～34
[3] 徐亚同编著.废水生物处理的运行和管理.上海:华东师范大学出版社,1989.66～71

备注/Memo

备注/Memo:
第一作者:男, 1972年生, 在职博士研究生, 讲师.
更新日期/Last Update: 2000-07-20