[1]徐文雷,孙扬善,丁绍松.原位合成VC和TiC颗粒对Fe3Al基合金显微组织的影响[J].东南大学学报(自然科学版),2001,31(5):39-42.[doi:10.3969/j.issn.1001-0505.2001.05.009]
 Xu Wenlei,Sun Yangshan,Ding Shaosong.Effect of In-Situ VC and TiC Particles on Microstructureof Fe3Al-Based Alloys[J].Journal of Southeast University (Natural Science Edition),2001,31(5):39-42.[doi:10.3969/j.issn.1001-0505.2001.05.009]
点击复制

原位合成VC和TiC颗粒对Fe3Al基合金显微组织的影响()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
31
期数:
2001年第5期
页码:
39-42
栏目:
材料科学与工程
出版日期:
2001-09-20

文章信息/Info

Title:
Effect of In-Situ VC and TiC Particles on Microstructureof Fe3Al-Based Alloys
作者:
徐文雷 孙扬善 丁绍松
东南大学材料科学与工程系, 南京 210096
Author(s):
Xu Wenlei Sun Yangshan Ding Shaosong
Department of Materials Science and Engineering, Southeast University, Nanjing 210096, China)
关键词:
Fe3Al VC TiC 形成机理 显微组织
Keywords:
Fe3Al VC TiC formation mechanism microstructure
分类号:
TG113.25
DOI:
10.3969/j.issn.1001-0505.2001.05.009
摘要:
以Fe3Al金属间化合物作为基体,采用反应铸造法制备了含VC,TiC颗粒Fe3Al基合金并研究了颗粒相在Fe3Al合金中的形成机理及颗粒相的加入对Fe3Al基合金显微组织结构的影响.结果表明,TiCp在高温液态熔体中原位合成,且在基体中均匀分布,可以作为异质形核核心而细化Fe3Al基合金铸锭组织,从而改善Fe3Al合金的热加工性能; VCp是在固相中形核并长大的,对铸态组织的细化作用不明显,但其对热加工后再结晶组织的细化作用甚于TiCp.
Abstract:
Fe3Al-based alloys containing VC and TiC particles are fabricated by melting and casting process. The formation mechanism of particles and effects of particles on microstructure of Fe3Al-based alloys are investigated. The results show that TiC particles, which are in-situ formed in melt, result in the significant microstructural refinement and the improvement of the hot-working ability of the ingots. While VC particles, which are formed during the solidification process of the melt, have no effect on as-cast microstructure, however, they cause remarkable refinement of the recrystallized microstructure.

参考文献/References:

[1] Stoloff C G.Iron aluminides:present status and future prospects.Mater Sci & Eng,1998,A258:1~14
[2] McKamey C G,Devan J H,Tortorelli P F,et al.A review of recent developments in Fe3Al-based alloys.J Mater Res,1991,6:1779~1805
[3] 殷为民,郭建亭,胡壮麟.长程有序金属间化合物Fe3Al合金的研究现状与发展.材料科学进展,1992,6(4):277~283
[4] 郭军,孙扬善,张谨平.Nb和Mo对Fe3Al基合金高温蠕变性能的影响.东南大学学报,1995,25(5):91~96
[5] 高小玫,钱祥荣.Cr对Fe3Al的韧化作用.金属学报,1994,30(7):307~311
[6] Zhang Zhonghua,Sun Yangshan,Shen Guangjun,et al.Improvements of tensile strength and creep resistance of Fe-28Al alloy with tungsten addition.Scripta Materialia,1998,28(1):21~25
[7] Liu C T,McKamey C G,Lee E H.Environmental effect on room-temperature ductility and fracture in Fe3Al.Scripta Metallurgica,1990,24:385~389
[8] 薛烽,孙扬善,包益红,等.颗粒增强Fe3Al基复合材料的制备和性能.材料研究学报,2000,14(4):344~348
[9] 欧阳柳章,罗承萍,隋贤栋,等.原位生成制备Al2O3增强铝基复合材料.中国有色金属学报,2000,10(2):159~162
[10] 孙建荣,孙扬善,李龙.TiCP/3Cr13复合材料的显微组织和力学性能的研究.铸造,2000,49(7):392~395
[11] 薛烽.熔铸法制备陶瓷颗粒增强Fe3Al基复合材料及性能研究:[学位论文].南京:东南大学材料科学与工程系,1999
[12] 陈新民,陈启元.冶金热力学导论.北京:冶金工业出版社,1986.282~283
[13] Baker I,Munroe P R.Mechanical properties of FeAl.International Materials Reviews,1997,42(5):181~205
[14] 雍岐龙,阎生贡,裴和中,等.钒在钢中的物理冶金学基础数据.钢铁研究学报,1998,10(5):63~66

相似文献/References:

[1]薛烽,孙扬善,闵学刚.TiC增强Fe3Al基复合材料的显微组织与力学性能[J].东南大学学报(自然科学版),2001,31(1):91.[doi:10.3969/j.issn.1001-0505.2001.01.020]
 Xue Feng,Sun Yangshan,Min Xuegang.Microstructure and Mechanical Properties of Fe3Al Matrix Composite Reinforced by TiC Particles[J].Journal of Southeast University (Natural Science Edition),2001,31(5):91.[doi:10.3969/j.issn.1001-0505.2001.01.020]
[2]姚正军,薛烽.钼和铬的添加对Fe3Al基合金力学性能的影响[J].东南大学学报(自然科学版),2000,30(5):73.[doi:10.3969/j.issn.1001-0505.2000.05.017]
 Yao Zhengjun,Xue Feng.Effect of Molybdenum and Chromium Additions on the Mechanical Properties of Fe3Al-Based Alloys[J].Journal of Southeast University (Natural Science Edition),2000,30(5):73.[doi:10.3969/j.issn.1001-0505.2000.05.017]

备注/Memo

备注/Memo:
作者简介:徐文雷,男,1971年生,博士研究生.
基金项目:国家863计划资助项目(7150050122).
指体积分数,下同.
更新日期/Last Update: 2001-09-20