[1]林鹤云,王念春.电接触合金材料导电率的三维有限元分析[J].东南大学学报(自然科学版),2002,32(4):627-630.[doi:10.3969/j.issn.1001-0505.2002.04.020]
 Lin Heyun,Wang Nianchun.Three-dimensional finite element analysis for electrical conductivity of electro-contact alloy material[J].Journal of Southeast University (Natural Science Edition),2002,32(4):627-630.[doi:10.3969/j.issn.1001-0505.2002.04.020]
点击复制

电接触合金材料导电率的三维有限元分析()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
32
期数:
2002年第4期
页码:
627-630
栏目:
电气工程
出版日期:
2002-07-20

文章信息/Info

Title:
Three-dimensional finite element analysis for electrical conductivity of electro-contact alloy material
作者:
林鹤云 王念春
东南大学电气工程系,南京 210096
Author(s):
Lin Heyun Wang Nianchun
Department of Electrical Engineering, Southeast University, Nanjing 210096, China
关键词:
电接触材料 合金 电导率 电场 有限元
Keywords:
electro-contact material alloy electrical conductivity electric field finite element method
分类号:
TM201
DOI:
10.3969/j.issn.1001-0505.2002.04.020
摘要:
提出了一种计算多相合金电导率的数值模拟方法,采用有限元技术模拟电流流过导体时具有分布特征的电流场,各单元的组分随机产生以模拟实际的合金,通过计算全部单元中的总损耗来确定合金材料的等效电导率.在建立标量电位分析三维电流场有限元分析模型的基础上,以CuCr和AgW等合金为例计算了不同组分时电接触合金材料的电导率,并探讨了气孔率对电导率的影响,给出了不同组分时的电流场分布.计算结果与标准值的比较证明了模型的有效性.
Abstract:
A numerical method for modeling electrical conductivity of multi-component alloys is presented. The finite element method is employed to analyze the current field that is generated when a current flows through a conductor. The components of all finite elements are determined randomly to simulate real alloy. The equivalent electrical conductivity is calculated through summing up the total loss produced in the multi-component alloy modeled. By using the three-dimensional finite element model based on the electric scalar potential, the influences of component and porosity on the electrical conductivities of Cu-Cr and Ag-W electro-contact alloys are investigated numerically. The current field distributions corresponding to different ratios of components are also shown. The validity of the proposed model was verified through applications of the model in many practical problems, where excellent agreement between measured and calculated results was obtained.

参考文献/References:

[1] 凯尔 A.电接触和电接触材料[M].赵华人等译.北京:机械工业出版社,1993.5-25.
[2] 黄锡文.电接触材料的导电性探讨[J].电工合金,1998(3):26-32.
  Huang Xiwen.Discussion on the electrical conductivity of electro-contact material[J].Electrotechnical Alloy,1998(3):26-32.(in Chinese)
[3] 江全元,何俊佳,邹积岩,等.CuCr复合材料的导电性[J].华中理工大学学报,1999,27(8):78-80.
  Jiang Quanyuan,He Junjia,Zou Jiyan,et al.Electrical conductivity of CuCr compound materials[J]. J Huazhong Univ of Sci & Tech,1999,27(8):78-80(in Chinese)
[4] 宋润生,曹泽淳.银钨触头材料电阻特性的计算机仿真[J].电工技术学报,1997,12(4):11-14.
  Song Runsheng,Cao Zechun.A computer simulation study of the resistivity of Ag-W electro-contact material[J].Transactions of China Electrotechnical Society, 1997,12(4):11-14.(in Chinese)
[5] Liu Chun,He Jun,Zou Jiyan.3 dimensional simulation on electrical conductivity of CuCr conduct materials[A].In:IEEE 19th Int Symp on Discharges and Electrical Insulation in Vacuum [C].Xi’an,2000.733-737.
[6] Kozlenkova N I,Pantsyrnyi V I,Shikow A K,et al.Electrical conductivity of high-strength Cu-Nb microcomposites[J].IEEE Transactions on Magnetics,1996,32(4):2921-2924.

相似文献/References:

[1]朱蓓蓓,孙扬善,贾迪,等.Mg-Sm系合金的显微组织及力学性能[J].东南大学学报(自然科学版),2009,39(3):610.[doi:10.3969/j.issn.1001-0505.2009.03.036]
 Zhu Beibei,Sun Yangshan,Jia Di,et al.Microstructure and mechanical properties of Mg-Sm alloys[J].Journal of Southeast University (Natural Science Edition),2009,39(4):610.[doi:10.3969/j.issn.1001-0505.2009.03.036]
[2]王楠,舒光冀,杨汉国.部分凝固Sn-15%Pb合金的变温流变性质[J].东南大学学报(自然科学版),1989,19(4):66.[doi:10.3969/j.issn.1001-0505.1989.04.010]
 Wang Nan Shu Guangji(Department of Materials Science and Technology)Yang Hanguo(Department of Mathematics and Mechanics).The Rheological Features of Continuously Cooled Partially Solidified Sn-15%Pb Alloy[J].Journal of Southeast University (Natural Science Edition),1989,19(4):66.[doi:10.3969/j.issn.1001-0505.1989.04.010]

备注/Memo

备注/Memo:
作者简介: 林鹤云(1965—),男,教授,博士生导师,hyling@seu.edu.cn.
更新日期/Last Update: 2002-07-20