[1]崔建伟,宋爱国,黄惟一.遥操作系统中MOTOMAN-SV3X机器人的运动建模研究[J].东南大学学报(自然科学版),2003,33(4):424-429.[doi:10.3969/j.issn.1001-0505.2003.04.011]
　Cui Jianwei,Song Aiguo,Huan Weiyi.Research on kinematics modeling of MOTOMAN-SV3X robot in teleoperate system[J].Journal of Southeast University (Natural Science Edition),2003,33(4):424-429.[doi:10.3969/j.issn.1001-0505.2003.04.011]
点击复制

遥操作系统中MOTOMAN-SV3X机器人的运动建模研究()
分享到：

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
33
期数:
2003年第4期
页码:
424-429
栏目:
自动化
出版日期:
2003-07-20

文章信息/Info

Title:
Research on kinematics modeling of MOTOMAN-SV3X robot in teleoperate system
作者:
崔建伟;  宋爱国;  黄惟一
东南大学仪器科学与工程系, 南京 210096
Author(s):
Cui Jianwei;  Song Aiguo;  Huan Weiyi
Department of Instument Science and Technology, Southeast University, Nanjing 210096, China
关键词:
机器人;  运动学;  莫托曼机器人;  通用模型;  遥操作
Keywords:
robot;  kinematics;  MOTOMAN robot;  universal model;  teleoperate
分类号:
TP241
DOI:
10.3969/j.issn.1001-0505.2003.04.011
摘要:
研究了遥操作系统中MOTOMAN-SV3X机器人的运动学模型及使之通用化的建模方法.首先提出用符合人们习惯的方法规定各机器人关节坐标系的方向,可以使得用Denavit-Hartenberg 方法建立的MOTOMAN-SV3X机器人运动学模型有通用性和可移植性; 提出当机器人3个相邻且正交的关节轴线交于一点时,逆解运算可以有简捷的运算方法,并用这种方法求得了MOTOMAN-SV3X机器人的运动逆解.最后分析了这种机器人的工作空间.本文所得公式不仅适用于MOTOMAN-SV3X,也可直接移植到与之有相同自由度布局的机器人,而本文的方法则可更广泛地用于各种类型的机器人.
Abstract:
A kinematical model of MOTOMAN-SV3X robot and an approach of universalization of the modeling in teleoperation system are presented. Firstly, the reference frame directions of robot joint are prescribed according to human habit and this makes MOTOMAN-SV3X kinematical model based on Denavit-Hartenberg rule universal and portable. Secondly, the conclusion is drawn that when three neighboring and perpendicular joint axes intersect at one point, the inverse transformation is very simple. By this method kinematical inverse solution of MOTOMAN-SV3X is calculated. Finally, the MOTOMAN-SV3X workspace is analyzed. Formulas developed in this paper are not only suitable for MOTOMAN-SV3X robot but also able to be migrated directly to the robot system which has the same degree of freedom layout as MOTOMAN-SV3X. Furthermore, the proposed method could be applied to other types of robot.

参考文献/References:

[1] 察可文,冯益华.MOTOMAN-K6机器人的逆运动学分析[J].山东轻工业学院学报,1997,11(2):68-75.
　　Cha Kewen,Feng Yihua.An inverse kinematical analysis of the MOTOMAN-K6 robot[J]. Journal of Shandong Institute of Industry,1997,11(2):68-75.(in Chinese)
[2] 余达太,马香峰,郗安民,等.工业机器人应用工程[M].北京:冶金工业出版社,1999.23-24.
[3] 王雪松,许世范,郝继飞.MOTOMAN机械手运动方程新的推导方法及求解[J].中国矿业大学学报,2001,30(1):73-76.
　 Wang Xuesong,Xu Shifan,Hao Jifei,et al.New inferential method and efficient solutions for inverse kinematics equations of robot MOTOMAN[J]. Journal of China University of Mining & Technology,2001,30(1):73-76.(in Chinese)
[4] Paul R P.Robot manipulators:mathematics,programming,and control[M].Cambridge:MIT Press,1981.181-187.
[5] 蔡自兴.机器人学[M].北京:清华大学出版社,2000.54

相似文献/References:

[1]周骥平,朱兴龙,颜景平.冗余度机器人手臂负荷自适应估测控制算法[J].东南大学学报(自然科学版),2002,32(6):929.[doi:10.3969/j.issn.1001-0505.2002.06.023]
　Zhou Jiping,Zhu Xinglong,Yan Jingping.Load adaptive estimate control arithmetic in redundant robot manipulator[J].Journal of Southeast University (Natural Science Edition),2002,32(4):929.[doi:10.3969/j.issn.1001-0505.2002.06.023]
[2]余杨,黄惟一.一种机器人光纤传感器光路设计的一般方法[J].东南大学学报(自然科学版),2001,31(1):39.[doi:10.3969/j.issn.1001-0505.2001.01.009]
　Yu Yang,Huang Weiyi.A General Method of Optical Structure Design of Robot Optical Fiber Sensors[J].Journal of Southeast University (Natural Science Edition),2001,31(4):39.[doi:10.3969/j.issn.1001-0505.2001.01.009]
[3]金万敏,姜剑虹.机器人系统的KED方程及其求解[J].东南大学学报(自然科学版),1993,23(2):12.[doi:10.3969/j.issn.1001-0505.1993.02.003]
　The KED Equation and Solving of Robot Mechanism[J].Journal of Southeast University (Natural Science Edition),1993,23(4):12.[doi:10.3969/j.issn.1001-0505.1993.02.003]
[4]金万敏,查选芳.机器人操作手末端夹持器轨迹生成的旋量方法[J].东南大学学报(自然科学版),1991,21(5):45.[doi:10.3969/j.issn.1001-0505.1991.05.007]
　Motor Method of Robot End Effector Path Generation[J].Journal of Southeast University (Natural Science Edition),1991,21(4):45.[doi:10.3969/j.issn.1001-0505.1991.05.007]
[5]卢伟,宋爱国,蔡健荣,等.柑橘采摘机器人结构设计及运动学算法[J].东南大学学报(自然科学版),2011,41(1):95.[doi:10.3969/j.issn.1001-0505.2011.01.019]
　Lu Wei,Song Aiguo,Cai Jianrong,et al.Structural design and kinematics algorithm research for orange harvesting robot[J].Journal of Southeast University (Natural Science Edition),2011,41(4):95.[doi:10.3969/j.issn.1001-0505.2011.01.019]
[6]徐卫良.机器人精度的概率优化综合[J].东南大学学报(自然科学版),1989,19(1):53.[doi:10.3969/j.issn.1001-0505.1989.01.008]
　Xu Weiliang(Department of Mechanical Engineering).Optimal Accuracy Synthesis of Industrial Robot by Stochastic Approach[J].Journal of Southeast University (Natural Science Edition),1989,19(4):53.[doi:10.3969/j.issn.1001-0505.1989.01.008]
[7]杨挺,金万敏.机器人操作手速度空间理论及其应用[J].东南大学学报(自然科学版),1989,19(3):1.[doi:10.3969/j.issn.1001-0505.1989.03.001]
　Yang Ting Jin Wanmin (Department of Mechanical Engineering).Theory of Velocityspace of Robotic Manipulator with Applications[J].Journal of Southeast University (Natural Science Edition),1989,19(4):1.[doi:10.3969/j.issn.1001-0505.1989.03.001]
[8]张庆,黄惟一,蒋洪明.机器人触觉传感器的优化设计[J].东南大学学报(自然科学版),1988,18(3):49.[doi:10.3969/j.issn.1001-0505.1988.03.007]
　Zhang Qing Huang Weiyi Jiang Hongming (Department of Automatic Control).Optimum—design of Robot Tactile Sensor[J].Journal of Southeast University (Natural Science Edition),1988,18(4):49.[doi:10.3969/j.issn.1001-0505.1988.03.007]
[9]文巨峰,罗翔,颜景平,等.基于多智能体的智能机器人分布式控制系统[J].东南大学学报(自然科学版),2003,33(1):53.[doi:10.3969/j.issn.1001-0505.2003.01.013]
　Wen Jufeng,Luo Xiang,Yan Jingping,et al.Multi-agent based distributed control system for intelligent robots[J].Journal of Southeast University (Natural Science Edition),2003,33(4):53.[doi:10.3969/j.issn.1001-0505.2003.01.013]
[10]陈俊杰,黄惟一.双边力交互方式下遥控机器人系统的网络模型[J].东南大学学报(自然科学版),1998,28(2):109.[doi:10.3969/j.issn.1001-0505.1998.02.021]
　Chen junjie,Huang Weiyi.A Network Model for Telerobot System in Bilateral Teleopration[J].Journal of Southeast University (Natural Science Edition),1998,28(4):109.[doi:10.3969/j.issn.1001-0505.1998.02.021]
[11]刘成良,张为公,翟羽健.RV12L 6R 焊接机器人运动学正解及计算机仿真系统[J].东南大学学报(自然科学版),1998,28(5):84.[doi:10.3969/j.issn.1001-0505.1998.05.016]
　Liu Chengliang,Zhang Weigong,Zhai Yujian.Forward Kinematic Solution and Computer Simulation of RV12L 6R Welding Robot[J].Journal of Southeast University (Natural Science Edition),1998,28(4):84.[doi:10.3969/j.issn.1001-0505.1998.05.016]

备注/Memo

备注/Memo:
基金项目: 国家“863”计划资助项目(2001AA423140).
作者简介: 崔建伟(1969—),男,博士生; 黄惟一(联系人),教授,博士生导师,hhwy@seu.edu.cn.
更新日期/Last Update: 2003-07-20