[1]郑宏,俞茂宏.板件宽厚比对高层钢结构压弯构件滞回性能的影响[J].东南大学学报(自然科学版),2003,33(4):517-521.[doi:10.3969/j.issn.1001-0505.2003.04.034]
 Zheng Hong,Yu Maohong.Effects of the plates width-thickness ratios on cyclic characteristics of I-section steel beam-columns[J].Journal of Southeast University (Natural Science Edition),2003,33(4):517-521.[doi:10.3969/j.issn.1001-0505.2003.04.034]
点击复制

板件宽厚比对高层钢结构压弯构件滞回性能的影响()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
33
期数:
2003年第4期
页码:
517-521
栏目:
土木工程
出版日期:
2003-07-20

文章信息/Info

Title:
Effects of the plates width-thickness ratios on cyclic characteristics of I-section steel beam-columns
作者:
郑宏12 俞茂宏1
1 西安交通大学建筑工程与力学学院,西安 710049; 2 长安大学建筑工程学院,西安 710061
Author(s):
Zheng Hong12 Yu Maohong1
1 School of Construction and Mechanics, Xi’an Jiaotong University, Xi’an 710049, China
2 School of Construction Engineering, Chang’an University, Xi’an 710061, China
关键词:
工形截面钢压弯构件 损伤 滞回性能分析 宽厚比限值
Keywords:
I-section steel beam-columns damage cyclic analyses limit plate’s width-thickness ratios
分类号:
TU391
DOI:
10.3969/j.issn.1001-0505.2003.04.034
摘要:
根据能量等效性假设及热力学第二定律,推出损伤材料的弹性本构方程; 采用混合强化准则,考虑Bauschinger效应、屈服平台、硬化(软化)效应及损伤和损伤演化影响,建立了结构钢弹塑性各向异性损伤本构关系.结合构建的本构关系,采用八节点超参数壳体单元,推导了用U.L.格式及Cauchy应力描述的板壳双重非线性有限元方程,并编制了计算程序.分析了翼缘宽厚比、腹板高厚比对工形截面钢压弯构件滞回性能的影响,提出了压弯构件板件宽(高)厚比限值公式及相关公式.
Abstract:
The elastic anisotropic damage model is put forward based on the hypothesis of energy equivalent and the second law of the thermodynamics. The elasto-plastic anisotropic damage model of the constructional steel is also proposed, which involves the mixed hardening criterion, Bauschinger effect, yield plateau, hardening(softening)influence, damage and damage evolution. Based on the constitutive model of the constructional steel and the 8-node degenerate shell element, the updated Lagrange(U.L.)formulations for FEM analyses are derived. After developing and debugging program, the method of double nonlinear shell FEM is adopted to analyze the I-section steel beam-columns under the action of cyclic loads. The interaction formulas of the plate’s width-thickness ratios of the I-section steel beam-columns under the action of cyclic loads are established.

参考文献/References:

[1] Ballio G,Calado L.Steel bent sections under cyclic loads experimental and numerical approaches [J].Construzioni Metalliche, 1986,46(1):1-23.
[2] Watanabe E,Fukuwaka M,Isami H,et al.An experimental study on strength of thin-walled steel box beam-columns under repetitive bending [J].Structural Eng/Earthquake Eng,1988,5(1):21-29.
[3] Ohi K I,Takanashi K.Multi-spring joint model for inelastic behavior of steel members with local buckling[A].In:Fukumoto Y,ed. Stability and Ductility of Steel Structures Under Cyclic Loading[C].Boca Raton:CRC Press,1992.215-224.
[4] 郝际平.钢结构在循环荷载作用下的局部屈曲、低周疲劳的试验与理论研究[D].西安:西安建筑科技大学土木工程系,1995.
[5] Macrae G A,Kawashima K.Estimation of the deformation capacity of steel bridge piers [A].In:Fukumoto Y,ed. Stability and Ductility of Steel Structures Under Cyclic Loading[C].Boca Raton:CRC Press,1992.335-347.
[6] Kumar S.Damage evaluation in steel box columns by cyclic loading tests [J].Journal of Structural Engineering,1996,122(6):626-634.
[7] Usami T.Damage evaluation in steel box columns by pseudodynamic tests [J].Journal of Structural Engineering, 1996,122(6):635-642.
[8] Nishikawa K.Retrofitting for seismic upgrading of steel bridge columns [J].Engineering Structures,1998,20(4-6):540-551.
[9] 郑宏.工形截面钢构件在循环荷载作用下平面外相关屈曲分析及抗震设计对策[D].西安:西安建筑科技大学土木工程系,2000.
[10] Margetson J.Tensile stress strain characterization of nonlinear materials [J].J of Strain Analysis,1987,16(2):104-108.
[11] Chow C L,Wang J.An anisotropic theory of elasticity for continuum damage mechanics[J].Int J Fract,1987,33(1):3-16.
[12] 王勖成,邵敏.有限单元法基本原理和数值方法.第2版[M].北京:清华大学出版社,1997.537.
[13] 中国建筑技术研究院.JGJ99—98 高层民用建筑钢结构技术规程[S].北京:中国建筑工业出版社,1998.

相似文献/References:

[1]张久鹏,黄晓明.沥青混合料永久变形的弹黏塑-损伤力学模型[J].东南大学学报(自然科学版),2010,40(1):185.[doi:10.3969/j.issn.1001-0505.2010.01.035]
 Zhang Jiupeng,Huang Xiaoming.Viscoelastoplastic-damage mechanics model of permanent deformation in asphalt mixture[J].Journal of Southeast University (Natural Science Edition),2010,40(4):185.[doi:10.3969/j.issn.1001-0505.2010.01.035]
[2]漆鹏廷,黄跃平,李兆霞.脆性固体破坏表面裂纹的自动识别和处理[J].东南大学学报(自然科学版),2000,30(3):80.[doi:10.3969/j.issn.1001-0505.2000.03.017]
 Qi Pengting,Huang Yueping,Li Zhaoxia.The Auto-Detection and Auto-Processing of Crack Images on the Surface of Brittle Solids[J].Journal of Southeast University (Natural Science Edition),2000,30(4):80.[doi:10.3969/j.issn.1001-0505.2000.03.017]

备注/Memo

备注/Memo:
基金项目: 国家自然科学基金资助项目(59678030)、中国博士后科学基金资助项目(中博基[2001]14号).
作者简介: 郑宏(1964—),男,博士后,副教授.
更新日期/Last Update: 2003-07-20