[1]惠卓,刘钊,黄晓东,等.三跨上承式预应力混凝土拱桥优化设计[J].东南大学学报(自然科学版),2007,37(2):296-300.[doi:10.3969/j.issn.1001-0505.2007.02.022]
 Hui Zhuo,Liu Zhao,Huang Xiaodong,et al.Optimal design of three-span prestressed concrete deck arch bridge[J].Journal of Southeast University (Natural Science Edition),2007,37(2):296-300.[doi:10.3969/j.issn.1001-0505.2007.02.022]
点击复制

三跨上承式预应力混凝土拱桥优化设计()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
37
期数:
2007年第2期
页码:
296-300
栏目:
土木工程
出版日期:
2007-03-20

文章信息/Info

Title:
Optimal design of three-span prestressed concrete deck arch bridge
作者:
惠卓1 刘钊1 黄晓东2 周青虎1
1 东南大学土木工程学院, 南京 210096; 2 南京市市政设计研究院, 南京 210008
Author(s):
Hui Zhuo1 Liu Zhao1 Huang Xiaodong2 Zhou Qinghu1
1 School of Civil Engineering, Southeast University, Nanjing 210096, China
2 Nanjing Municipal Design Institute, Nanjing 210008, China
关键词:
上承式预应力混凝土拱桥 优化设计方法 拱脚推力 二期预应力筋
Keywords:
prestressed concrete deck arch bridge optimal design method thrust at springer second pre-stressed tendon
分类号:
TU312.1;U448.215
DOI:
10.3969/j.issn.1001-0505.2007.02.022
摘要:
在分析预应力布置位置对三跨上承式拱桥内力和拱脚推力影响的基础上,阐明了该类桥型预应力筋的布置原则.同时,为在设计时考虑减小拱脚不平衡推力这一因素,提出了基于敏感性分析的首控截面应力双控设计法、首控拱脚净推力双控设计法以及直接利用优化理论进行设计等3种合理优化设计方法.这些设计法针对该类桥型的特点,利用在拱顶梁中分别布置一定数量的上下偏心的预应力筋来优化结构的内力和满足各部分的位移限制要求.通过对南京三山桥工程的设计计算,表明该设计方法完全可以满足设计要求,并可供相关工程参考验证.
Abstract:
On the basis of analyzing effect of prestressed tendon layout on internal force and thrust at springer, the principle of prestressed tendon layout for three-span prestressed concrete deck arch bridge is illustrated. In order to consider the reduction of the thrust at springer, three optimization design methods, i.e. method by firstly controlling stress of section based on sensitivity analysis, method by firstly controlling thrust at springer based on sensitivity analysis, and design method based on optimum theory, are suggested. Combined with that the influence of the prestressed tendon layout on mechanics characteristic of three-span prestressed concrete deck arch bridge is taken into account in these methods, and demand of internal force and displacement in design is satisfied by using upward and downward eccentric layout of prestressed tendon. The calculation of the Nanjing Sanshan bridge engineering is taken as an example, and it is shown that the new design methods are reasonable and can meet the demand of engineering design.

参考文献/References:

[1] 李国平.连续拱梁组合桥的性能与特点[J].桥梁建设,1999(1):10-13.
  Li Guoping.Performance and characteristic of continuous composite arch bridge [J].Bridge Construction,1999(1):10-13.(in Chinese)
[2] 顾安邦,孙国柱.公路桥涵设计手册——拱桥(上、下册)[M].北京:人民交通出版社,1994.
[3] 朱伯芳.有限元法原理与应用[M].北京:中国水利水电出版社,1998.
[4] 张治成,叶贵如,陈衡治,等.大跨度桥梁施工控制结构分析计算方法[J].浙江大学学报:工学版,2004,38(2):210-214.
  Zhang Zhicheng,Ye Guiru,Chen Hengzhi,et al..Analysis and computation method of structure for the construction control of bridges with large span[J].Journal of Zhejiang University:Engineering Science,2004,38(2):210-214.(in Chinese)
[5] Wang F W,Chan S L.Optimization and sensitivity analysis of space frames allowing for large deflection[J].Engineering Structures,2006,28(10):1395-1406.
[6] 王春光,石永久,王元清,等.结构可靠度计算中的敏感性因素分析[J].清华大学学报:自然科学版,2000,40(6):108-111.
  Wang Chunguang,Shi Yongjiu,Wang Yuanqing,et al.Sensitive factor analysis for structural reliability calculations [J]. Journal of Tsinghua University:Science and Technology,2000,40(6):108-111.(in Chinese)
[7] Tanskanen P.A multiobjective and fixed elements based modification of the evolutionary structural optimization method[J]. Computer Methods in Applied Mechanics and Engineering,2006,196(1/2/3):76-90.
[8] Peng D M,Fairfield C A.Optimal design of arch bridges by integrating genetic algorithms and the mechanism method [J].Engineering Structures,1999,21(1):75-82.
[9] Aguilar Madeira J F,Rodrigues H,Pina H.Multi-objective optimization of structures topology by genetic algorithms [J].Advances in Engineering Software,2005,36(1):21-28.
[10] Lee J,Kim S-M,Park H-S,et al.Optimum design of cold-formed steel channel beams using micro genetic algorithm[J]. Engineering Structures,2005,27(1):17-24.
[11] Lee J,Kim S-M,Park H S.Optimum design of cold-formed steel columns by using micro genetic algorithms[J].Thin-Walled Structures,2006,44(9):952-960.

备注/Memo

备注/Memo:
作者简介: 惠卓(1964—),男,博士,副教授,xizhuoxian@seu.edu.cn.
更新日期/Last Update: 2007-03-20