[1]刘仁平,金保升,仲兆平,等.循环流化床燃烧棉秆两种床料的特性[J].东南大学学报(自然科学版),2007,37(3):441-445.[doi:10.3969/j.issn.1001-0505.2007.03.018]
 Liu Renping,Jin Baosheng,Zhong Zhaoping,et al.Study on two kinds of bed materials during CFB combustion of cotton stalk[J].Journal of Southeast University (Natural Science Edition),2007,37(3):441-445.[doi:10.3969/j.issn.1001-0505.2007.03.018]
点击复制

循环流化床燃烧棉秆两种床料的特性()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
37
期数:
2007年第3期
页码:
441-445
栏目:
能源与动力工程
出版日期:
2007-05-20

文章信息/Info

Title:
Study on two kinds of bed materials during CFB combustion of cotton stalk
作者:
刘仁平 金保升 仲兆平 孙志翱 张勇
东南大学洁净煤发电及燃烧技术教育部重点实验室, 南京 210096
Author(s):
Liu Renping Jin Baosheng Zhong Zhaoping Sun Zhiao Zhang Yong
Key Laboratory of Clean Coal Power Generation and Combustion Technology of Ministry of Education, Southeast University, Nanjing 210096, China
关键词:
循环流化床 生物质 床料 结渣
Keywords:
circulation fluidized bed biomass bed material agglomeration
分类号:
TK6
DOI:
10.3969/j.issn.1001-0505.2007.03.018
摘要:
分别选用石英砂颗粒和高铝矾土颗粒作为循环流化床的床料,棉杆作为燃料,在0.2 MW循环流化床上进行实验.实验结果表明,石英砂颗粒床料容易形成结渣,而高铝矾土颗粒床料使用情况良好.通过对长时间运行后的床料颗粒进行XRF和SEM/EDS分析,发现2种床料运行后的化学成分发生改变,随着运行时间的延长,碱金属在床料中富集度越来越高.通过对反应前后内部结构和成分进行比较,发现石英砂床料结渣主要是因为在颗粒的表面生成了低熔点的化合物,在高温条件下床料由于表面层相互粘结而产生结渣,而高铝钒土颗粒可以有效地防止低熔点化合物的生成,从而减少结渣.
Abstract:
Silica and aluminous soil were used as bed materials when cotton stalk was burning in a circulation fluidized bed(CFB)combustion pilot plant(0.2 MW). After a long time operation, silica bed material was found sintered and aluminous soil bed material kept unchanged. The particles of both bed materials were then sampled. X-ray fluorescence(XRF), scanning electron microscope(SEM)and energy dispersive X-ray spectroscopy(EDS)were employed to identify the bed materials in order to find the reason of difference. The result shows that alkali metals are enriched in the bed material particles linearly as the operation time extends. The low melting point compound produced on the surface of silica particles take responsibility for the agglomeration. Aluminous soil bed materials can prevent the formation of low melting point compound, therefore the agglomeration is reduced.

参考文献/References:

[1] Sami M,Annamalai K,Wooldridge M.Co-firing of coal and biomass fuel blends [J]. Progress in Energy and Combustion Science,2001,27(2):171-214.
[2] Demirbas Ayhan.Potential applications of renewable energy sources,biomass combustion problems in boiler power systems and combustion related environmental issues [J]. Progress in Energy and Combustion Science,2005,31(6):171-192.
[3] Hein K R G,Bemtgen J M.EU clean coal technology,cocombustion of coal and biomass [J]. Fuel Processing Technology,1998,54(1):159-169.
[4] Spliethoff H,Hein K R G.Effect of co-combustion of biomass on emissions in pulverized fuel furnaces [J].Fuel Processing Technology,1998,54(1):189-205.
[5] 董清梅,颜河恒.循环流化床锅炉的发展现状及前景[J].锅炉制造,2005(4):72-74.
  Dong Qingmei,Yan Heheng.Status and prospect of circulating fluidized bed boiler [J]. Boiler Manufacturing,2005(4):72-74.(in Chinese)
[6] Chirone Riccardo,Miccio Francesco,Scala Fabrizio.Mechanism and prediction of bed agglomeration during fluidized bed combustion of a biomass fuel:effect of the reactor scale [J].Chemical Engineering Journal,2006,123(3):71-80.
[7] Vuthaluru Hari B,Zhang Dongke.Effect of Ca-and Mg-bearing minerals on particle agglomeration defluidisation during fluidised-bed combustion of a South Australian lignite [J]. Fuel Processing Technology,2001,69(1):13-27.
[8] Miles Thomas R,Miles Thomas R,Baxter Larry L,et al.Boiler deposits from firing biomass fuels [J].Biomass Bioenergy,1996,10(2):125-138.
[9] Bryers Richard W.Fireside slagging,fouling and high-temperature corrosion of heat transfer surface due to impurities in steam raising fuels [J]. Progress in Energy and Combustion Science,1996,22(1):29-120.
[10] Öhman Marus,Nordin Anders.Bed agglomeration characteristics during fluidized bed combustion of biomass fuels[J].Energy & Fuels,2000,14(1):169-178.

相似文献/References:

[1]董长青,金保升,仲兆平,等.循环流化床掺烧生活垃圾实验研究[J].东南大学学报(自然科学版),2002,32(1):95.[doi:10.3969/j.issn.1001-0505.2002.01.022]
 Dong Changqing,Jin Baosheng,Zhong Zhaoping,et al.Experimental study on the co-firing of municipal refuse in a circulating fluidized bed[J].Journal of Southeast University (Natural Science Edition),2002,32(3):95.[doi:10.3969/j.issn.1001-0505.2002.01.022]
[2]房德山,冷伟,徐治皋,等.循环流化床锅炉传热特性分析[J].东南大学学报(自然科学版),2001,31(6):52.[doi:10.3969/j.issn.1001-0505.2001.06.012]
 Fang Deshan,Leng Wei,Xu Zhigao,et al.Analysis of Heat Transfer Characteristics in Circulating Fluidized Bed Boiler[J].Journal of Southeast University (Natural Science Edition),2001,31(3):52.[doi:10.3969/j.issn.1001-0505.2001.06.012]
[3]陶敏,金保升,仲兆平,等.循环流化床烟气脱硫多层喷水数学模型[J].东南大学学报(自然科学版),2010,40(1):144.[doi:10.3969/j.issn.1001-0505.2010.01.027]
 Tao Min,Jin Baosheng,Zhong Zhaoping,et al.Mathematical model for multi-level humidifying of the circulating fluidized bed-flue gas desulfurization system[J].Journal of Southeast University (Natural Science Edition),2010,40(3):144.[doi:10.3969/j.issn.1001-0505.2010.01.027]
[4]向文国,徐祥,肖云汉.循环流化床上升段流体动力特性数值模拟[J].东南大学学报(自然科学版),2005,35(5):752.[doi:10.3969/j.issn.1001-0505.2005.05.021]
 Xiang Wenguo,Xu Xiang,Xiao Yunhan.Fluid dynamics numerical simulation for riser of circulating fluidized bed[J].Journal of Southeast University (Natural Science Edition),2005,35(3):752.[doi:10.3969/j.issn.1001-0505.2005.05.021]
[5]周建新,邵壮,李崇,等.基于Aspen平台的Oxy-CFB燃烧侧动态特性模拟[J].东南大学学报(自然科学版),2014,44(6):1187.[doi:10.3969/j.issn.1001-0505.2014.06.017]
 Zhou Jianxin,Shao Zhuang,Li Chong,et al.Dynamic characteristics of Oxy-CFB combustion system based on Aspen[J].Journal of Southeast University (Natural Science Edition),2014,44(3):1187.[doi:10.3969/j.issn.1001-0505.2014.06.017]

备注/Memo

备注/Memo:
作者简介: 刘仁平(1980—),男,博士生; 金保升(联系人),男,教授,博士生导师,bsjin@seu.edu.cn.
更新日期/Last Update: 2007-05-20