[1]焦楚杰,孙伟,高培正.钢纤维高强混凝土的中应变率本构关系[J].东南大学学报(自然科学版),2007,37(5):892-897.[doi:10.3969/j.issn.1001-0505.2007.05.031]
 Jiao Chujie,Sun Wei,Gao Peizheng.Constitutive relation of SFRHSC at medium strain rate[J].Journal of Southeast University (Natural Science Edition),2007,37(5):892-897.[doi:10.3969/j.issn.1001-0505.2007.05.031]
点击复制

钢纤维高强混凝土的中应变率本构关系()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
37
期数:
2007年第5期
页码:
892-897
栏目:
土木工程
出版日期:
2007-09-20

文章信息/Info

Title:
Constitutive relation of SFRHSC at medium strain rate
作者:
焦楚杰1 孙伟2 高培正2
1 1 广州大学土木工程学院, 广州 510006; 2 2 东南大学材料科学与工程学院, 南京 211189
Author(s):
Jiao Chujie1 Sun Wei2 Gao Peizheng2
1 School of Civil Engineering, Guangzhou University, Guangzhou 510006
2 School of Materials Science and Engineering, Southeast University, Nanjing 211189
关键词:
分离式霍普金森压杆 钢纤维高强混凝土 中应变率 冲击压缩 率相关性本构方程
Keywords:
split Hopkinson press bar steel fiber reinforced high strength concrete medium strain rate impact compression rate-dependent constitutive equations
分类号:
TU377
DOI:
10.3969/j.issn.1001-0505.2007.05.031
摘要:
采用分离式霍普金森压杆(SHPB)对纤维体积率为0~3%的钢纤维高强混凝土(SFRHSC)进行了中应变率的冲击压缩试验.试验表明,应变率从阀值提高到90 /s时,SFRHSC峰值应力增幅30%左右,弹性模量增幅50%左右,峰值应变增长幅度则是基体混凝土的2~3倍.集料-高强基体和钢纤维-高强基体的双重叠加效应,大大提高了基体的抗冲击强度和韧度,使SFRHSC试件在冲击荷载作用下呈现出“微裂而不散,裂而不断”的良好破坏形态,而在相近的冲击荷载下,基体混凝土试件成粉碎性破坏.根据试验结果建立了SFRHSC四参数率相关性本构方程,该方程同时考虑了应变率和应变对材料应力的影响.
Abstract:
Impact compression experiments for the steel fiber reinforced high strength concrete(SFRHSC)at medium strain rate were conducted using the split Hopkinson press bar(SHPB)testing method. The volume fractions of steel fibers of SFRHSC were between 0 and 3%. The experiment results show that, when the strain rate increases from threshold value to 90 /s, the maximum stress of SFRHSC increases about 30%, the elastic modulus of SFRHSC increases about 50%, and the increase in the peak strain of SFRHSC is 2-3 times of that in matrix specimen. The strength and toughness of the matrix can be improved remarkably because of the superposition effect of the aggregate-high strength matrix and steel fiber-high strength matrix. As a result, under impact loading, cracks may develop in the SFRHSC specimen however the overall shape of the specimen may remain virtually unchanged. As a contrast, under similar impact loading, the matrix specimens are broken almost into small pieces. On the basis of the experiments, the rate-dependent constitutive equations with four key parameters are established, which take both strain rate and strain effect on the material stress into account.

参考文献/References:

[1] 焦楚杰.高与超高性能钢纤维砼抗冲击和抗爆研究 [D].南京:东南大学材料科学与工程学院,2004.
[2] Yan Handong,Sun Wei,Chen Huisu.The effect of silica fume and steel fiber on the dynamic mechanical performance of high-strength concrete[J].Cement and Concrete Research,1999,29(3):423-426.
[3] Luo Xin,Sun Wei,Chan Sammy Y N.Characteristics of high-performance steel fiber reinforced concrete subject to high velocity impact[J].Cement and Concrete Research,2000,30(6):907-914.
[4] Sun Wei,Tian Qian.Chloride corrosion resistance of steel fiber reinforced high strength concrete[C] //Proceedings of the International Conference on Fiber Reinforced Concrete.Guangzhou,1997:119-127.
[5] Bischoff Peter H,Perry S H.Compressive behaviour of concrete at high strain rates [J]. Materials and Structures,1991,24(144):425-450.
[6] Zhao Han.A study on testing techniques for concrete-like materials under compressive impact loading [J].Cement and Concrete Composites,1998,20(4):293-299.
[7] Zhao Han.Analysis of high strain rate dynamic tests on concrete [C] //The 5th International Symposium on Cement and Concrete.Shanghai:Tongji University Press,2002:583-589.
[8] Lok T S,Asce M,Li X B,et al.Testing and response of large diameter brittle materials subjected to high strain rate [J].Journal of Materials in Civil Engineering,2002,14(3):262-269.
[9] Ross C Allen,Tedesco Joseph W,Kuennen Steven T.Effects of strain rate on concrete strength [J].ACI Materials Journal,1995,92(1):37-47.
[10] Ross C Allen.Fracture of concrete at high strain rate [C] //Shah S F,eds. Toughening Mechanism in Quasi-Brittle Materials.Netherland:Kluwer Academic Publishers,1991:577-591.
[11] Shah S P,Brandt A M,Ouyang C,et al.Toughness characterization and toughening mechanisms[C] //Naamam A E,Reinhard H W,eds.High Performance Fiber Reinforced Cementition Composites.London:E & FN Spon,1996:194-224.
[12] Nataraja M C,Dhang N,Gupta A P.Stress-strain curves for steel-fiber reinforced concrete under compression [J]. Cement and Concrete Composites,1999,21(6):383-390.
[13] Lee M K,Barr B I G.Strength and fracture properties of industrially prepared steel fiber reinforced concrete [J].Cement and Concrete Composites,2003,25(3):321-332.
[14] Tasdmir Canan,Tasdemir Mehmet A,Lydon Frank D,et al.Effects of silica fume and aggregate size on the brittleness of concrete [J].Cement and Concrete Research,1996,26(1):63-68.
[15] Bischoff Peter H,Perry Simon H.Impact behavior of plain concrete loading in uniaxial compression [J].Journal of Engineering Mechanics,1995, 121(6):685-693.
[16] 焦楚杰,孙伟,秦鸿根,等.钢纤维高强混凝土单轴受压本构方程[J].东南大学学报:自然科学版,2004,34(3):366-369.
  Jiao Chujie,Sun Wei,Qin Honggen et al.Constitutive equation of SFRHSC under uniaxial compress[J]. Journal of Southeast University:Natural Science Edition,2004,34(3):366-369.(in Chinese)

备注/Memo

备注/Memo:
基金项目: 国家自然科学基金重点资助项目(50708022)、广东省自然科学基金资助项目(06301038)、建设部科研开发资助项目(06-K1-37,07-K4-13,07-K4-5)、广州市属高校科技计划资助项目(62064).
作者简介: 焦楚杰(1974—),男,博士,副教授,jiaochujie@sina.com.
更新日期/Last Update: 2007-09-20