[1]吴晅,李铁,袁竹林,等.静止液体中顶部浸没管口处气泡形成的数值预测[J].东南大学学报(自然科学版),2008,38(1):86-91.[doi:10.3969/j.issn.1001-0505.2008.01.017]
 Wu Xuan,Li Tie,Yuan Zhulin,et al.Numerical prediction of bubble formation from top-submerged nozzle in stagnant liquid[J].Journal of Southeast University (Natural Science Edition),2008,38(1):86-91.[doi:10.3969/j.issn.1001-0505.2008.01.017]
点击复制

静止液体中顶部浸没管口处气泡形成的数值预测()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
38
期数:
2008年第1期
页码:
86-91
栏目:
化学化工
出版日期:
2008-01-20

文章信息/Info

Title:
Numerical prediction of bubble formation from top-submerged nozzle in stagnant liquid
作者:
吴晅 李铁 袁竹林 蔡杰
东南大学洁净煤发电及燃烧技术教育部重点实验室,南京 210096
Author(s):
Wu Xuan Li Tie Yuan Zhulin Cai Jie
Key Laboratory of Clean Coal Power Generation and Combustion Technology of Ministry of Education, Southeast University, Nanjing 210096, China
关键词:
气泡生成 气泡尺寸 顶部浸没气体流 数值预测
Keywords:
bubble formation bubble diameter top-submerged gas injection numerical prediction
分类号:
TQ027.3
DOI:
10.3969/j.issn.1001-0505.2008.01.017
摘要:
综合分析气泡的受力,基于动力学平衡建立了长大-脱离的两阶段气泡运动方程.对顶部浸没管口处形成气泡的尺寸进行直接数值预测.分析了气体流量、管口内外直径以及表面张力、液体粘度和液体密度对气泡尺寸的影响.并将计算结果与实验结果进行了对比,两者吻合较好,变化趋势一致.研究表明:气泡尺寸随着气体流量以及管口的内径和外径的增加而增大.气体流量和管口内外径都是影响气泡尺寸的重要因素; 在一定气体流量下,气泡的直径随着表面张力和液体粘度的增加而增大,而随着液体密度的增加而减少; 随着气体流量的增加,液体粘度对气泡尺寸的影响增强,而液体密度以及表面张力对气泡尺寸的影响减弱.
Abstract:
Bubble size is one of the key parameters in the process of gas inject into liquid through vertically downward top-submerged nozzles. Based on the overall force balance on the bubble a two-stage model is established for predict the size of bubbles formation from a downward top-submerged nozzle in stagnant liquid. The effects of gas flow rate, inner and outer nozzle diameters, surface tension, density and viscosity of liquid on the size of bubbles formed are analyzed. The predicted bubble size is in good agreement with experimental results. The results show that the bubble size increases with increasing in gas flow rate, inner and outer nozzle diameter. Thus the gas flow rate, nozzle inner and outer diameter are important influential factors on bubble size. Under constant gas flow rate, the diameter of bubble decreases with the increase of the density of liquid,whereas increases with increasing liquid viscosity and surface tension. With the increase of gas flow rate, the influences of liquid viscosity on size of bubble increase, but the influences of liquid density and surface tension on the bubble size weaken gradually.

参考文献/References:

[1] Liow Jong-Leng.Quasi-equilibrium bubble formation during top-submerged gas injection[J]. Chemical Engineering Science,2000,55(1):4515-4524.
[2] Floyd J M.The third decade of top submerged lance technology [C] //The Howard Worner International Symposium on Injection in Pyrometallurgy.Pennsylvania:The Minerals,Metals & Materials Society,1996:417-430.
[3] 龚晓波,顾兆林,林高平,等.水煤浆气化炉激冷流程中气液两相负浮力流动的数值模拟[J].化工学报,2003,54(7):930-935.
  Gong Xiaobo,Gu Zhaolin,Lin Gaoping,et al.Numerical simulation of gas-liquid two-phase flow with reverse buoyancy in quench chamber of coal gasifier and its application[J].Journal of Chemical Industry and Engineering,2003,54(7):930-935.(in Chinese)
[4] Gerlach D,Biswas G,Durst F.Quasi-static bubble formation on submerged orifices [J]. International Journal of Heat and Mass Transfer,2005,48(2):425-438.
[5] Zhang W,Tan R B H.A model for bubble formation and weeping at a submerged orifice with liquid cross-flow [J].Chemical Engineering Science,2003,58(1):287-295.
[6] Pamperin O,Rath H.Influence of buoyancy on bubble formation at submerged orifices [J]. Chemical Engineering Science,1995,50(19):3009-3024.
[7] 李彦鹏,白博峰.气泡从浸没孔中生成与上升的数值模拟[J].水动力学研究与进展,2006,21(5):660-666.
  Li Yanpeng,Bai Bofeng.Numerical simulation of bubble formation and rise from submerged orifices in viscous liquid [J].Journal of Hydrodynamics,2006,21(5):660-666.(in Chinese)
[8] 刘红,解茂昭,韩景东,等.黏性液体中锐孔处气泡的形成[J].热科学与技术.2005,4(3):262-266.
  Liu Hong,Xie Maozhao,Han Jingdong,et al.Bubble formation from submerged orifice in viscous liquid [J].Journal of Thermal Science and Technology,2005,4(3):262-266.(in Chinese)
[9] Szekely J,Fang S D.On bubble formation at the tip of a capillary with downward gas flow [J]. Chemical Engineering Science,1971,26(7):1123-1128.
[10] Tsuge H,Ruedin P,Kammel R.Bubble formation from a vertically downward facing nozzle in liquids and molten metals [J]. Journal of Chemical Engineering of Japan,1986,19(4):326-330.
[11] Tsuge H,Hibino S.Bubble formation from a submerged single orifice accompanied by pressure fluctuations in gas chamber [J].Journal of Chemical Engineering of Japan,1978,11(3):173-178.
[12] Tsuge Hideki,Tezuka Yusuke,Mitsudani Masae.Bubble formation mechanism from downward nozzle-effect of nozzle shape and operating parameters [J]. Chemical Engineering Science,2006,61(10):3290-3298.
[13] Berdnikov V L,Levin A M,Shakirov K M.Size of bubbles during the injection of metal [J].Steel in the USSR,1974,4(10):804-807.
[14] Irons G A,Guthrie R I L.Bubble formation at nozzles in pig iron [J]. Metallurgical Transactions B:Process Metallurgy,1978,9B(1):101-110.
[15] Zhang Lei,Masahiro Shoji.Aperiodic bubble formation from a submerged orifice [J].Chemical Engineering Science,2001,56(18):5371-5381.
[16] Luo Xukun,Yang Guoqiang,Lee D J.Single bubble formation in high pressure liquid-solid suspensions [J].Powder Technology,1998,100(2):103-112.
[17] Jamialahmadi M,Zehtaban M R,Muller-Steinhagen H,el at.Study of bubble formation under constant flow conditions [J]. Chemical Engineering Research and Design,2001,79(5):523-532.

备注/Memo

备注/Memo:
作者简介: 吴晅(1976—),男,博士生; 袁竹林(联系人),男,博士,教授,博士生导师,zlyuan@seu.edu.cn.
基金项目: 国家重点基础研究发展计划(973计划)资助项目(2004CB217707).
引文格式: 吴晅,李铁,袁竹林,等.静止液体中顶部浸没管口处气泡形成的数值预测[J].东南大学学报:自然科学版,2008,38(1):86-91.
更新日期/Last Update: 2008-01-20