[1]王素芳,陈以一.加强式端板连接节点的初始刚度与抗弯承载力[J].东南大学学报(自然科学版),2008,38(5):774-778.[doi:10.3969/j.issn.1001-0505.2008.05.007]
 Wang Sufang,Chen Yiyi.Initial stiffness and moment resistance of reinforced joint with end-plate connection[J].Journal of Southeast University (Natural Science Edition),2008,38(5):774-778.[doi:10.3969/j.issn.1001-0505.2008.05.007]
点击复制

加强式端板连接节点的初始刚度与抗弯承载力()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
38
期数:
2008年第5期
页码:
774-778
栏目:
土木工程
出版日期:
2008-09-20

文章信息/Info

Title:
Initial stiffness and moment resistance of reinforced joint with end-plate connection
作者:
王素芳 陈以一
同济大学土木工程学院, 上海 200092
Author(s):
Wang Sufang Chen Yiyi
College of Civil Engineering, Tongji University, Shanghai 200092, China
关键词:
钢结构 端板连接 背垫板 腹板补强板 初始刚度 抗弯承载力
Keywords:
steel structure end-plate connection backing plate supplementary web plate initial stiffness moment resistance
分类号:
TU391
DOI:
10.3969/j.issn.1001-0505.2008.05.007
摘要:
针对需要局部加强的梁柱端板连接节点,考虑了柱翼缘用背垫板加强,节点域柱腹板用补强板加强的构造形式.将节点分为若干组件,求各组件初始刚度; 对其中经过加强的组件,采用理论推导和有限元分析相结合的方法得出初始刚度表达式; 然后将各组件初始刚度进行组装,得到加强式端板连接节点初始刚度.用屈服线法推导出含背垫板柱翼缘的设计抗弯承载力表达式,参照现行规范推导出其余影响节点承载力的组件的设计抗弯承载力表达式,取其中抗弯承载力的最小值,得出加强式端板连接节点的设计抗弯承载力表达式.通过与有限元计算结果对比表明加强式节点初始刚度的计算方法具有足够的精确性,可用于节点刚性的判断和参数研究.
Abstract:
In beam-to-column joint with bolted end-plate connection, the structural details of column flange reinforced by backing plate and column web panel reinforced by supplementary plate are analyzed. The joint is divided into some basic components and the initial stiffness of each component is obtained. Especially, the initial stiffness of reinforced components is drawn by theoretical model and finite element analysis. The initial stiffness of reinforced joint can be obtained by assembling the initial stiffness of each component. The design moment resistance of column flange reinforced by backing plate is deduced based on yield line method and the design moment resistances of other components are deduced based on present codes. The design moment resistance of the reinforced joint is then determined by the minimum of the design moment resistances of all components. By comparison with the results of finite element calculation, it’s verified that the method to calculate the initial stiffness of reinforced joint is accurate enough to be used to estimate the rigid behavior of the joint and to make parametric study.

参考文献/References:

[1] 中国工程建设标准化协会.CECS102 2002 门式刚架轻型房屋钢结构技术规程[S].北京:中国计划出版社,2003.
[2] 吴香香,陈以一.薄柔钢框架节点区刚性试验研究[J].建筑结构,2008,38(7):56-60.
  Wu Xiangxiang,Chen Yiyi.Testing study on joint stiffness of slender steel frame[J].Building Structure,2008,38(7):56-60.(in Chinese)
[3] Grogan W,Surtees J O.Experimental behaviour of end plate connections reinforced with bolted backing angles[J].Journal of Constructional Steel Research,1999,50(1):71-96.
[4] Tagawa H,Gurel S.Application of steel channels as stiffeners in bolted moment connections[J].Journal of Constructional Steel Research,2005,61(12):1650-1671.
[5] 赵伟.梁柱外伸端板连接中若干问题研究[D].杭州:浙江大学建筑工程学院,2006.
[6] BS.EN 1993-1-8 Eurocode 3:design of steel structures part 1-8 [S].London:BSI,2005.
[7] Moore D B,Sims P A C.Preliminary investigations into the behaviour of extended end-plate steel connections with backing plates[J].Journal of Constructional Steel Research,1986,6(2):95-122.
[8] Zoetemeijer P.A design method for the tension side of statically loaded bolted beam-to-column connections[J].Heron,1974,20(1):3-59.
[9] 中华人民共和国建设部.GB50017—2003 钢结构设计规范[S].北京:中国计划出版社,2003.
[10] 王素芳,陈以一.梁柱端板连接节点的初始刚度计算[J].工程力学,2008,25(8):109-115.
  Wang Sufang,Chen Yiyi,Calculation of initial stiffness of beam-to-column end-plate joint[J]. Engineering Mechanics,2008,25(8):109-115.(in Chinese)
[11] Castro J M,Elghazouli A Y,Izzuddin B A.Modelling of the panel zone in steel and composite moment frames[J].Engineering Structures,2005,27(1):129-144.
[12] Kim K D,Engelhardt M D.Monotonic and cyclic loading models for panel zones in steel moment frames[J].Journal of Constructional Steel Research,2002, 58(5):605-635.
[13] 刘大海,杨翠如.高楼钢结构设计(钢结构、钢-混凝土混合结构)[M].北京:中国建筑工业出版社,2003.
[14] Yee Y L,Melchers R E.Moment-rotation curves for bolted connections[J].Journal of Structural Engineering,1986,112(3):615-635.
[15] 李少甫.钢结构的螺栓端板连接[J].建筑结构,1998,28(8):24-26.
  Li Shaofu.Bolted end-plate connection of steel structure[J].Building Structure,1998,28(8):24-26.(in Chinese)

相似文献/References:

[1]舒赣平,范圣刚.钢结构构件设计的CAD技术[J].东南大学学报(自然科学版),2000,30(4):54.[doi:10.3969/j.issn.1001-0505.2000.04.010]
 Shu Ganping,Fan Shenggang.CAD Technique of Steel Structure Member Design[J].Journal of Southeast University (Natural Science Edition),2000,30(5):54.[doi:10.3969/j.issn.1001-0505.2000.04.010]
[2]施刚,石永久,王元清,等.端板连接高强度螺栓受力特性试验研究[J].东南大学学报(自然科学版),2004,34(3):375.[doi:10.3969/j.issn.1001-0505.2004.03.021]
 Shi Gang,Shi Yongjiu,Wang Yuanqing,et al.Experimental study on bolt resistance for structural steel extended end-plate connections[J].Journal of Southeast University (Natural Science Edition),2004,34(5):375.[doi:10.3969/j.issn.1001-0505.2004.03.021]

备注/Memo

备注/Memo:
作者简介: 王素芳(1977—),女,博士生; 陈以一(联系人),男,博士,教授,博士生导师,yiyichen@mail.tongji.edu.cn.
引文格式: 王素芳,陈以一.加强式端板连接节点的初始刚度与抗弯承载力[J].东南大学学报:自然科学版,2008,38(5):774-778.
更新日期/Last Update: 2008-09-20