[1]殷勇,王寿荣,王存超,等.结构解耦的双质量微陀螺仪结构方案设计与仿真[J].东南大学学报(自然科学版),2008,38(5):918-922.[doi:10.3969/j.issn.1001-0505.2008.05.034]
 Yin Yong,Wang Shourong,Wang Cunchao,et al.Structural scheme design and simulation of structure-decoupled dual-mass MEMS gyroscope[J].Journal of Southeast University (Natural Science Edition),2008,38(5):918-922.[doi:10.3969/j.issn.1001-0505.2008.05.034]
点击复制

结构解耦的双质量微陀螺仪结构方案设计与仿真()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
38
期数:
2008年第5期
页码:
918-922
栏目:
仪器科学与技术
出版日期:
2008-09-20

文章信息/Info

Title:
Structural scheme design and simulation of structure-decoupled dual-mass MEMS gyroscope
作者:
殷勇 王寿荣 王存超 盛平
东南大学仪器科学与工程学院, 南京 210096
Author(s):
Yin Yong Wang Shourong Wang Cunchao Sheng Ping
School of Instrument Science and Engineering, Southeast University, Nanjing 210096, China
关键词:
结构解耦 微机械陀螺 ANSYS仿真
Keywords:
structure-decoupled micromachined gyroscope ANSYS simulation
分类号:
U666.12
DOI:
10.3969/j.issn.1001-0505.2008.05.034
摘要:
为了解决双线振动双质量微机械陀螺驱动和检测模态耦合的问题,提出了一种新的双质量双线振动式微机械陀螺仪结构方案,并对驱动和检测梳齿的电容布置以及梁的结构形式进行了设计.根据微陀螺的结构和工作原理,对该陀螺的驱动和检测模态进行了理论分析,给出了简化的动力学方程,并利用ANSYS有限元分析软件进行了数值仿真,以验证设计思想的正确性.仿真结果表明,双质量块和折叠梁的设计使该微陀螺能够实现驱动和检测模态的完全解耦.在仿真验证的基础上,通过调节结构参数实现了陀螺驱动模态与敏感模态固有频率的匹配及其与干扰模态的隔离.2个质量块的差动输出能够有效减小共模信号的干扰,变面积式的梳齿电容布置方式能使微陀螺在空气下的模态品质因数显著提高.该结构设计方案能使微陀螺的整体性能得到提高,达到了理想的设计目的.
Abstract:
A new dual-mass decoupled double-linear vibrational MEMS(microelectromechanical system)gyroscope is proposed to solve the decoupling problem of the driving mode and sensing mode of the gyroscope. The comb capacitances’ layouts and the beam’s structures of the gyroscope are also designed. On the basis of the structure and the principle of operation, the gyroscope’s modals are analyzed in theory, and the simplified dynamic equations are proposed. By using the finite element software ANSYS the modals of the gyroscope has been numerically simulated for the purpose of validating the scheme. The simulation results show that the design of dual-mass and folded-beams can completely realize the decoupling purpose of the driving mode and sensing mode. On the basis of the simulation, the natural frequencies in drive mode and sense mode are matched and also isolated from the interfering modals by adjusting the structure parameters. The two masses’ differential outputs can effectually decrease the interferences of common mode signals. The alterative cross-areas’ layouts of comb capacitances can remarkably enhance the modals quality factor of the gyro in the atmosphere. This structural scheme can improve the gyro’s overall performances and achieve the ideal design purpose.

参考文献/References:

[1] Masako Tanaka.An industrial and applied review of new MEMS devices features[J].Microelectronic Engineering,2007,84(5/6/7/8):1341-1344.
[2] Oboe R,Antonello R,Carbone P,et al.Design of a delta-sigma bandpass demodulator for a Z-axis MEMS vibrational gyroscope[C] //Advanced Intelligent Mechatronics:Proceedings IEEE/ASME International Conference on.Monterey,California,USA,2005:238-242.
[3] Chiou J A.Process window of micromachined gyroscopes subjected to vibrational frequencies[J].Sensors and Actuators A:Physical,2006,125(2):519-525.
[4] 李锦明.高信噪比电容式微机械陀螺的研究[D].太原:中北大学电子科学与技术系,2005.
[5] 王寿荣.硅微型惯性器件理论及应用[M].南京:东南大学出版社,2000.
[6] Braxmaier M,Gaisser A,Link T,et al.Cross-coupling of the oscillation modes of vibratory gyroscopes [C] //12th International Conference on Solid-State Sensors:Actuators and Microsystems.Boston,USA,2003:167-170.
[7] Weinberg M S.Error sources in in-plane silicon tuning-fork MEMS gyroscopes [J].Microelectromechanical Systems IEEE,2006,15(3):479-491.
[8] Alper S E,Akin T.Symmetrical and decoupled nickel microgyroscope on insulating substrate[J]. Sensors and Actuators A:Physical,2004,115(2/3):336-350.
[9] 许本文,焦群英.机械振动与模态分析基础[M].北京:机械工业出版社,1998:67-77.
[10] 师汉民.机械振动系统:分析·测试·建模·对策(上册)[M].2版.武汉:华中科技大学出版社,2004:84-87.
[11] 刘国庆,杨庆东.ANSYS工程应用教程:机械篇[M].北京:中国铁道出版社,2003.

备注/Memo

备注/Memo:
作者简介: 殷勇(1975—),男,博士生; 王寿荣(联系人),男,教授,博士生导师,srwang@seu.edu.cn.
基金项目: 总装备部“十一五”预研课题资助项目(6922002055).
引文格式: 殷勇, 王寿荣, 王存超,等.结构解耦的双质量微陀螺仪结构方案设计与仿真[J].东南大学学报:自然科学版,2008,38(5):918-922.
更新日期/Last Update: 2008-09-20