[1]王成,张毅刚.体内张拉成形屋架垂跨比和矢跨比影响分析[J].东南大学学报(自然科学版),2009,39(4):819-824.[doi:10.3969/j.issn.1001-0505.2009.04.033]
 Wang Cheng,Zhang Yigang.Analysis on ISFRT affected by sag-span ratio and rise-span ratio[J].Journal of Southeast University (Natural Science Edition),2009,39(4):819-824.[doi:10.3969/j.issn.1001-0505.2009.04.033]
点击复制

体内张拉成形屋架垂跨比和矢跨比影响分析()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
39
期数:
2009年第4期
页码:
819-824
栏目:
土木工程
出版日期:
2009-07-20

文章信息/Info

Title:
Analysis on ISFRT affected by sag-span ratio and rise-span ratio
作者:
王成12 张毅刚2
1 中国建筑科学研究院国家建筑工程质量监督检验中心, 北京 100013; 2 北京工业大学空间结构研究中心, 北京 100124
Author(s):
Wang Cheng12 Zhang Yigang2
1 National Center for Quality Supervision and Test of Building Engineering, China Academy of Building Research,Beijing 100013,China
2 Space Structures Research Center, Beijing University of Technology, Beijing 100124, China
关键词:
屋架 体内张拉成形 垂跨比 矢跨比
Keywords:
roof truss internal stretch forming sag-span ratio rise-span ratio
分类号:
TU393.3
DOI:
10.3969/j.issn.1001-0505.2009.04.033
摘要:
为了改善体内张拉成形屋架受力性能,根据结构张拉成形后的矢跨比和垂跨比组合的不同,建立了20个计算模型.选用APDL参数化设计语言编程分析垂跨比及矢跨比对结构受力特点的影响.研究表明:随着结构矢跨比的增加和垂跨比的减小,上弦中间单元成形轴力、弯矩和截面应力逐渐增大,而受荷状态则是在此基础上叠加相应轴力; 成形阶段以弯曲应变为主,截面拉应力和压应力较为接近,表现为轴压力很小,受荷阶段以轴向压应变的增加为主,表现为轴压力很大.选取适宜的矢跨比和垂跨比组合可以改善体内张拉成形屋架受力性能.
Abstract:
In order to improve mechanics performance of the internal stretch forming roof truss(ISFRT), twenty computation models with different sag-span ratios and rise-span ratios were built. The influence of sag-span ratio and rise-span ratio on mechanics performance was analyzed using parametric design language APDL programming analysis. Study shows that with the increase of rise-span ratio and the decrease of sag-span ratio of ISFRT, the axial force, the bending moment and the cross-section stress of upper chord middle elements in the forming process increase gradually, and the ISFRT state in the loading process is formed by subjoining special axial force to the state in the forming process. Additionally, bending strain is the main mechanics performance in the forming stage, in which cross-section tension stress is close to compressive stress, so the axial force of ISFRT is small. And the increase in axial compressive strain is the main mechanics performance in the loading stage, so the axial force of ISFRT is great. Selecting appropriate sag-span ratio and rise-span ratio can improve mechanics performance of ISFRT.

参考文献/References:

[1] Clarke M J,Hancock G J.Finite-element nonlinear of stressed-arch frames [J]. Journal of Structural Engineering,1991,117(10):2819-2837.
[2] Clarke M J,Hancock G J.Test and nonlinear analyses of small-scale stressed-arch frames [J]. Journal of Structural Engineering,1995,121(2):187-200.
[3] Clarke M J,Hancock G J.Design of top chord of stressed-arch frames [J]. Journal of Structural Engineering,1995,121(2):201-213.
[4] 丁明.张拉整体桁架结构成形机理研究[D].北京:北京工业大学建筑工程学院,2003.
[5] 张宏.张拉成形拱架模型试验研究[D].北京:中国建筑科学研究院,2005.
[6] 宋威.新型体内预应力钢屋架张拉成形及受荷全过程试验研究[D].北京:北京工业大学建筑工程学院,2006.
[7] 过镇海,时旭东.钢筋混凝土原理和分析[M].北京:清华大学出版社,2003:133-136.
[8] 中国建筑科学研究院.GB 50009—2001建筑结构荷载规范[S].北京:中国建筑工业出版社,2001:5-18.
[9] 王成,张毅刚.体内张拉成形空间网格结构的形态分析——几何位移迭代法[J].北京工业大学学报,2009,35(3):316-322.
  Wang Cheng,Zhang Yigang.Form-finding analysis of Internal-prestressed reticulated space structure through posttensioning:geometrical displacement iteration method[J]. Journal of Beijing University of Technology,2009,35(3):316-322.(in Chinese)
[10] 龚曙光,谢桂兰.Ansys操作命令与参数化编程[M].北京:机械工业出版社,2005.
[11] 张毅刚,薛素铎,杨庆山,等.大跨空间结构[M].北京:机械工业出版社,2005:362-367.

备注/Memo

备注/Memo:
作者简介: 王成(1970—),男,博士,高级工程师, c_wang@126.com.
基金项目: 国家自然科学基金资助项目(50278004)、高等学校博士学科点专项科研基金资助项目.
引文格式: 王成,张毅刚.体内张拉成形屋架垂跨比和矢跨比影响分析[J].东南大学学报:自然科学版,2009,39(4):819-824.[doi:10.3969/j.issn.1001-0505.2009.04.033]
更新日期/Last Update: 2009-07-20