[1]胡洋洋,朱荻,李寒松,等.UV-LIGA与微细电火花加工组合制造微细电解阵列电极[J].东南大学学报(自然科学版),2010,40(1):106-110.[doi:10.3969/j.issn.1001-0505.2010.01.020]
 Hu Yangyang,Zhu Di,Li Hansong,et al.Fabrication of micro-ECM electrode array by combining UV-LIGA with micro electro-discharge machining[J].Journal of Southeast University (Natural Science Edition),2010,40(1):106-110.[doi:10.3969/j.issn.1001-0505.2010.01.020]
点击复制

UV-LIGA与微细电火花加工组合制造微细电解阵列电极()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
40
期数:
2010年第1期
页码:
106-110
栏目:
材料科学与工程
出版日期:
2010-01-20

文章信息/Info

Title:
Fabrication of micro-ECM electrode array by combining UV-LIGA with micro electro-discharge machining
作者:
胡洋洋 朱荻 李寒松 曾永彬 明平美
南京航空航天大学江苏省精密与微细制造技术重点实验室,南京 210016
Author(s):
Hu Yangyang Zhu Di Li Hansong Zeng Yongbin Ming Pingmei
Jiangsu Key Laboratory of Precision and Micro-Manufacturing Technology,Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China
关键词:
UV-LIGA 微细电火花加工 微细电解加工 组合加工
Keywords:
ultraviolet lithographie galvanoformung and abformung micro electro-discharge machining micro-electrodemical machining combination machining
分类号:
TG661
DOI:
10.3969/j.issn.1001-0505.2010.01.020
摘要:
采用UV-LIGA与微细电火花加工组合技术制造大长径比微细阵列电极.先通过UV-LIGA技术制作微细群孔工具电极,然后通过电火花套料加工制作大长径比微细阵列电极.选取优化的工艺参数:前烘110 ℃保持12 h; 三步后烘50 ℃保持5 min、70 ℃保持10 min、90 ℃保持30 min; 采用谐振式电火花电源,电压200 V、峰值电流1.5 A、脉宽3.2 μs、脉间6.4 μs、放电间隙12 μm等,制备了直径85 μm、长1.5 mm,长径比达17.65的微细阵列电极.最后用制作出的微细阵列电极作为工具电极进行微细电解加工实验,在120 μm厚不锈钢板上电解加工出直径150 μm、形状均匀的微细阵列群孔结构.实验证明:UV-LIGA与微细电加工组合制造技术是一种可行的制作高深宽比微结构的方法; 利用微细阵列电极进行电解加工,能实现高效和高精度加工.
Abstract:
The combination of UV-LIGA(ultraviolet lithographie galvanoformung and abformung)with the micro electro-discharge machining(micro-EDM)process was adopted to fabricate high-aspect-ratio electrode array. First, micro hole array was fabricated through the UV-LIGA technology, then the electrode array was fabricated by the micro-EDM. Using the optimized parameters: soft bake at 110 ℃ for 12 h; post bake at 50 ℃ for 5 min, 70 ℃ for 10 min and 90 ℃ for 30 min; resonant EDM power supply of 200 V voltage, 1.5 A peak current, 3.2 μs pulse width, 6.4 μs inter-pulse, and 12 μm discharge gap et al, the electrode array of diameter 85 μm and 1.5 mm long was fabricated, the aspect ratio being up to 17.65. Finally, the electrode array was employed as a tool in the micro-ECM(micro-electrodemical machining), and the micro hole array of diameter 150 μm was machined on a 120 μm thick stainless steel by the micro-ECM. The experimental results show that the technology of combining UV-LIGA with micro-EDM is a feasible method to fabricate high aspect-ratio micro-structures, and using the electrode array as a tool, the micro-electrodemical machining can be carried out with high-efficiency and high-precision.

参考文献/References:

[1] 王明环,朱荻,徐惠宇.电化学腐蚀法制备针尖的试验研究[J].传感器技术,2005,24(3):24-26.
  Wang Minghuan,Zhu Di,Xu Huiyu.Experimental research on tips preparation using electrochemical etching[J].Journal of Transducer Technology,2005,24(3):24-26.(in Chinese)
[2] 胡富强,王振龙,赵万生 等.线电极放电磨削(WEDG)技术的研究与应用[J].哈尔滨工业大学学报,2003,35(10):1171-1174.
  Hu Fuqiang,Wang Zhenlong,Zhao Wansheng,et al.Wire electro-discharge grinding(WEDG)and its application [J].Journal of Harbin Institute of Technology,2003,35(10):1171-1174.(in Chinese)
[3] Kim B H,Park B J,Chu Ch N.Fabrication of multiple electrodes by reverse EDM and their application in micro ECM[J]. Journal of Micromechanics and Microengineering,2006,16(4):843-850.
[4] Takahata K,Gianchandani Y B.Batch mode micro-electro-discharge machining[J].Journal of Microelectromechanical Systems,2002,11(2):102-110.
[5] 翁明浩,王振龙.微细阵列方形轴孔的电火花和电化学组合加工工艺研究[J].电加工与模具,2007(5):5-8.
  Weng Minghao,Wang Zhenlong.Research on micro square array electrodes and holes combination process by EDM and ECM [J]. Electromachining & Mould,2007(5):5-8.(in Chinese)
[6] 明平美,朱荻,胡洋洋,等.基于UV-LIGA技术制造微结构器件试验研究[J].中国机械工程,2006,17(21):2216-2220.
  Ming Pingmei,Zhu Di,Hu Yangyang,et al.Experimental research on fabrication of micro-structures & micro-devices by UV-LIGA [J]. China Mechanical Engineering,2006,17(21):2216-2220.(in Chinese)
[7] Lorenz H,Despont M,LaBianca N.SU-8:a low-cost negative resist for MEMS[J]. Journal of Micromechanics and Microengineering,1997,7(3):121-124.
[8] Lorenz H,Despont M,Fahrni M,et al.High-aspect-ratio,ultrathick,negative-tone near-UV PR and its applications for MEMS[J].Sensors and Actuators A,1998,64(1):33-39.
[9] Chen Shuntong.Fabrication of high-density micro holes by upward batch micro EDM [J]. Journal of Micromechanics and Microengineering,2008,18(8):1-9.
[10] Becnel Charles,Desta Yohannes,Kelly Kevin.Ultra-deep X-ray lithography of densely packed SU-8 features:Ⅰ an SU-8 casting procedure to obtain uniform solvent content with accompanying experimental results [J].Journal of Micromechanics and Microengineering,2005,15(6):1242-1248.
[11] 朱荻,王明环,明平美,等.微细电化学加工技术[J].纳米技术与精密工程,2005,3(2):151-155.
  Zhu Di,Wang Minghuan,Ming Pingmei,et al.Micro electrochemical fabrication [J].Nanotechnology and Precision Engineering,2005,3(2):151-155.(in Chinese)

备注/Memo

备注/Memo:
作者简介: 胡洋洋(1982—),男,博士生; 朱荻(联系人),男,博士,教授,博士生导师,dzhu@nuaa.edu.cn.
基金项目: 国家自然科学基金重点资助项目(50635040)、国家自然科学基金资助项目(50805077)、江苏省自然科学基金资助项目(BK2008043)、国家高技术研究发展计划(863计划)重点资助项目(2009AA044205).
引文格式: 胡洋洋,朱荻,李寒松,等.UV-LIGA与微细电火花加工组合制造微细电解阵列电极[J].东南大学学报:自然科学版,2010,40(1):106-110. [doi:10.3969/j.issn.1001-0505.2010.01.020]
更新日期/Last Update: 2010-01-20