[1]朱蓓蓓,孙扬善,万晓峰,等.Mg-Zn-Al系变形镁合金的显微组织和力学性能[J].东南大学学报(自然科学版),2010,40(3):640-645.[doi:10.3969/j.issn.1001-0505.2010.03.039]
 Zhu Beibei,Sun Yangshan,Wan Xiaofeng,et al.Microstructures and mechanical properties of Mg-Zn-Al wrought magnesium alloys[J].Journal of Southeast University (Natural Science Edition),2010,40(3):640-645.[doi:10.3969/j.issn.1001-0505.2010.03.039]
点击复制

Mg-Zn-Al系变形镁合金的显微组织和力学性能()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
40
期数:
2010年第3期
页码:
640-645
栏目:
材料科学与工程
出版日期:
2010-05-20

文章信息/Info

Title:
Microstructures and mechanical properties of Mg-Zn-Al wrought magnesium alloys
作者:
朱蓓蓓 孙扬善 万晓峰 薛烽
东南大学材料科学与工程学院,南京 211189; 东南大学江苏省先进金属材料高技术研究重点实验室,南京 211189
Author(s):
Zhu Beibei Sun Yangshan Wan Xiaofeng Xue Feng
School of Materials Science and Engineering, Southeast University,Nanjing 211189,China
Jiangsu Key Laboratory of Advanced Metallic Materials, Southeast University,Nanjing 211189,China
关键词:
Mg-Zn-Al系合金 显微组织 力学性能
Keywords:
Mg-Zn-Al alloys microstructure mechanical property
分类号:
TG146.22
DOI:
10.3969/j.issn.1001-0505.2010.03.039
摘要:
制备了成分基于Mg-(3-5)Zn-(1-3)Al的5种ZA系镁合金,并研究了合金在铸态和热挤压态的显微组织和力学性能.在ZA系列的铸态镁合金中,将Zn含量(质量分数)固定在3%,提高Al含量,则第2相由致密的共晶相ε(Mg51Zn20)变成呈典型的离异共晶形貌的τ(Mg32(Al,Zn)49)相.在ZA31基础上增加Zn含量没有引起合金显微组织中组成相发生变化,但中间相ε的体积分数增加.在280 ℃温度下的热挤压过程中,合金发生了动态再结晶,组织显著细化,且铸态组织中出现的中间相大部分溶入α-Mg基体.ZA系合金铸锭热挤压后,合金的强度和塑性均得到大幅度改善, 其中合金ZA51具有最好的强度和塑性的匹配.结果表明ZA系合金具有良好的热加工性能.
Abstract:
Five ZA series magnesium alloys based on Mg-(3-5)Zn-(1-3)Al are prepared and their microstructures and mechanical properties under as-cast and extruded conditions are investigated. When the Zn mass fraction is fixed on 3%, as the Al content is increased, the second phases of alloys are transformed from a dense eutectic phase ε(Mg51Zn20)to phase τ(Mg32(Al,Zn)49)which shows divorced eutectic morphology. Increasing Zn content based on ZA31 does not result in any changes of phase constitution but increases the volume fraction of the ε phase. After extrusion at 280 ℃, most of the inter-phases existing in the as-cast microstructure are dissolved into the matrix and the microstructures of the alloys are significantly refined due to recrystallization occurring during the extrusion. Both the strength and ductility of the alloys prepared are notably improved after the extrusion and the alloy ZA51 exhibits higher mechanical properties than the other alloys. Results show that the ZA alloys have good thermal workability.

参考文献/References:

[1] 潘复生,韩恩厚.高性能变形镁合金及加工技术[M].北京:科学出版社,2007:21.
[2] Brulower P M.Automotive die casting magnesium reviving up for the 21st century[J].Die Casting Engineering,1997,41(3):68-70.
[3] 汤彬,李培杰,曾大本,等.镁基复合材料研究的现状和展望[J].特种铸造及有色合金,2002(3):34-36.
  Tang Bin,Li Peijie,Zeng Daben,et al.Present research status and lookout of Mg base composite[J].Special Casting and Nonferrous Alloys,2002(3):34-36.(in Chinese)
[4] Lou A A.Recent magnesium alloy development for elevated temperature application[J]. International Materials Reviews,2004,49(1):13-30.
[5] 陆树荪,顾开道,郑来苏.有色铸造合金及熔炼[M].北京:国防工业出版社,1983:84-85.
[6] Housh S,Mikucki B.Metals handbook:vol 9 [M].10th ed.Russell Township,OH,USA:ASM International,1990:455-479.
[7] 吕宜振.Mg-Al-Zn合金组织、性能、变形和断裂行为研究[D].上海:上海交通大学材料科学与工程学院,2001.
[8] ASM International Alloy Phase Diagram and the Handbook Committees.ASM handbook:vol 3 [M].Russell Township,OH,USA:ASM International,1992:1541-1543.
[9] 曾小勤,丁文江,姚正裔,等.Mg-Zn-Al系合金组织和力学性能[J].上海交通大学学报,2005,39(1):46-51.
  Zeng Xiaoqin,Ding Wenjiang,Yao Zhengyi,et al.The microstructure and mechanical properties of Mg-Zn-Al alloys[J].Journal of Shanghai Jiaotong University,2005,39(1):46-51.(in Chinese)
[10] 胡庚祥,蔡珣.材料科学基础[M].上海:上海交通大学出版社,2005:240.
[11] 刘强,陈振华,陈吉华.铝含量对Mg-6Zn系合金显微组织和力学性能的影响[J].矿业工程,2005,25(5):74-76.
  Liu Qiang,Chen Zhenhua,Chen Jihua.Influences of Al on microstructures and properties of Mg-6Zn alloys[J]. Mining and Metallurgical Engineering,2005,25(5):74-76.(in Chinese)
[12] 侯增寿,卢光熙.金属学原理[M].上海:上海科学技术出版社,1990:187.
[13] 卢晨,卫中山.镁合金的研究与应用进展[J].汽车工艺与材料,2005(9):1-3.
  Lu Chen,Wei Zhongshan.Development and applications of magnesium alloy[J].Automobile Technology and Material,2005(9):1-3.(in Chinese)
[14] 徐河,刘静安,谢水生.镁合金制备与加工技术[M].北京:冶金工业出版社,2007:93-116.

相似文献/References:

[1]江心怡,薛烽,赵阔.Mg-Al-RE系镁合金组织与性能[J].东南大学学报(自然科学版),2010,40(3):646.[doi:10.3969/j.issn.1001-0505.2010.03.040]
 Jiang Xinyi,Xue Feng,Zhao Kuo.Microstructures and mechanical properties of Mg-Al-RE alloys[J].Journal of Southeast University (Natural Science Edition),2010,40(3):646.[doi:10.3969/j.issn.1001-0505.2010.03.040]
[2]白晶,孙扬善,薛烽,等.Ca,Sr加入对Mg-Al基合金显微组织和蠕变性能的影响[J].东南大学学报(自然科学版),2007,37(4):639.[doi:10.3969/j.issn.1001-0505.2007.04.019]
 Bai Jing,Sun Yangshan,Xue Feng,et al.Effect of Ca and Sr on microstructure and creep property of Mg-Al based alloy[J].Journal of Southeast University (Natural Science Edition),2007,37(3):639.[doi:10.3969/j.issn.1001-0505.2007.04.019]
[3]闵学刚,孙扬善,杜温文,等.Ca,Si和RE对AZ91合金的组织和性能的影响[J].东南大学学报(自然科学版),2002,32(3):409.[doi:10.3969/j.issn.1001-0505.2002.03.022]
 Min Xuegang,Sun Yangshan,Du Wenwen,et al.Effects of Ca,Si and RE additions on the microstructures and mechanical properties of AZ91 based alloys[J].Journal of Southeast University (Natural Science Edition),2002,32(3):409.[doi:10.3969/j.issn.1001-0505.2002.03.022]
[4]张秀群,孙扬善,薛烽,等.Ni,Si,Mn和Ti对高强度铜合金力学性能和导电性能的影响[J].东南大学学报(自然科学版),2003,33(4):458.[doi:10.3969/j.issn.1001-0505.2003.04.019]
 Zhang Xiuqun,Sun Yangshan,Xue Feng,et al.Effect of Ni, Mn, Si and Ti on mechanical and electronic properties of copper alloy[J].Journal of Southeast University (Natural Science Edition),2003,33(3):458.[doi:10.3969/j.issn.1001-0505.2003.04.019]
[5]徐文雷,孙扬善,丁绍松.原位合成VC和TiC颗粒对Fe3Al基合金显微组织的影响[J].东南大学学报(自然科学版),2001,31(5):39.[doi:10.3969/j.issn.1001-0505.2001.05.009]
 Xu Wenlei,Sun Yangshan,Ding Shaosong.Effect of In-Situ VC and TiC Particles on Microstructureof Fe3Al-Based Alloys[J].Journal of Southeast University (Natural Science Edition),2001,31(3):39.[doi:10.3969/j.issn.1001-0505.2001.05.009]
[6]张忠铧,孙扬善.Fe3Al 基合金力学性能和显微组织的关系研究[J].东南大学学报(自然科学版),1997,27(5):24.[doi:10.3969/j.issn.1001-0505.1997.05.005]
 Zhang Zhonghua,Sun Yangshan.Relationship between Microstructure and Mechanical Properties of Fe 3Al Based Alloy[J].Journal of Southeast University (Natural Science Edition),1997,27(3):24.[doi:10.3969/j.issn.1001-0505.1997.05.005]
[7]孙扬善.镍铝青铜显微组织的发展[J].东南大学学报(自然科学版),1989,19(6):100.[doi:10.3969/j.issn.1001-0505.1989.06.014]
 Sun Yangshan(Department of Material Science and Engineering).Microstructual Development of Nickel-Aluminium Bronzes[J].Journal of Southeast University (Natural Science Edition),1989,19(3):100.[doi:10.3969/j.issn.1001-0505.1989.06.014]
[8]孙扬善.镍铝青铜中的共析组织[J].东南大学学报(自然科学版),1988,18(4):109.[doi:10.3969/j.issn.1001-0505.1988.04.014]
 Sun Yangshan (Department of Material Science and Engineeriug).Eutectoid Structures in Nickel-Aluminium Bronzes[J].Journal of Southeast University (Natural Science Edition),1988,18(3):109.[doi:10.3969/j.issn.1001-0505.1988.04.014]
[9]丁瑞莲.40Cr合金结构钢磨削表面质量的研究[J].东南大学学报(自然科学版),1984,14(2):15.[doi:10.3969/j.issn.1001-0505.1984.02.003]
 Ding Ruilian.A Study of Integrity of Ground Surface in Alloy Steel 40Cr[J].Journal of Southeast University (Natural Science Edition),1984,14(3):15.[doi:10.3969/j.issn.1001-0505.1984.02.003]
[10]周国桢.铝硅合金加锑变质及其机理的探讨[J].东南大学学报(自然科学版),1979,9(2):137.[doi:10.3969/j.issn.1001-0505.1979.02.012]
 Zhou Guo-Zhen.The Mechanism of Antimony Treatment in Aluminium-Silicon Alloys[J].Journal of Southeast University (Natural Science Edition),1979,9(3):137.[doi:10.3969/j.issn.1001-0505.1979.02.012]

备注/Memo

备注/Memo:
作者简介: 朱蓓蓓(1984—),女,硕士生; 孙扬善(联系人),男,教授,博士生导师,yssun@seu.edu.cn.
基金项目: “十一五”国家科技支撑计划资助项目(2006BAE04B07).
引文格式: 朱蓓蓓,孙扬善,万晓峰,等.Mg-Zn-Al系变形镁合金的显微组织和力学性能[J].东南大学学报:自然科学版,2010,40(3):640-645. [doi:10.3969/j.issn.1001-0505.2010.03.039]
更新日期/Last Update: 2010-05-20