[1]邓海顺,于海武,祁胜,等.规则分布微凹坑对配流副泄漏量的影响[J].东南大学学报(自然科学版),2012,42(1):72-76.[doi:10.3969/j.issn.1001-0505.2012.01.014]
 Deng Haishun,Yu Haiwu,Qi Sheng,et al.Effect of uniformly distributed micro-pits on leakage of port plate pair[J].Journal of Southeast University (Natural Science Edition),2012,42(1):72-76.[doi:10.3969/j.issn.1001-0505.2012.01.014]
点击复制

规则分布微凹坑对配流副泄漏量的影响()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
42
期数:
2012年第1期
页码:
72-76
栏目:
机械工程
出版日期:
2012-01-18

文章信息/Info

Title:
Effect of uniformly distributed micro-pits on leakage of port plate pair
作者:
邓海顺12于海武1祁胜1王晓雷1
(1南京航空航天大学江苏省精密与微细制造技术重点实验室,南京 210016)
(2安徽理工大学机械工程学院,淮南 232001)
Author(s):
Deng Haishun12Yu Haiwu1Qi Sheng1Wang Xiaolei1
(1Jiangsu Key Laboratory of Precision and Micro-manufacturing Technology, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China)
(2 School of Mechanical Engineering, Auhui University of Science and Technology, Huainan 232001,China)
关键词:
配流副微凹坑轴向柱塞泵泄漏量压力分布
Keywords:
port plate pair micro-pits axial piston pump leakage pressure distribution
分类号:
TH117
DOI:
10.3969/j.issn.1001-0505.2012.01.014
摘要:
提出了一种织构化配流副泄漏量的新计算方法,研究了圆柱形微凹坑直径、深度和面积率对配流副泄漏量的影响,并进行了初步的机理分析.结果表明:随着微凹坑深度的增加,泄漏量随之减小; 在相同的面积率下,较小直径的微凹坑具有较小的泄漏量; 轴向柱塞泵配流副缸体的转动速度对泄漏量几乎没有影响; 配流副工作压力与泄漏量成正比.计算结果可为选择符合配流副工况的圆柱形微凹坑几何参数提供指导.
Abstract:
A new method for calculating leakage of textured port plate pair is suggested in this paper. The effects of micro-pits’ diameter, depth and area ratio on leakage were studied, and the basic mechanism were analyzed in the same time. The main results show that the deeper the micro-pits’, the less the leakage; smaller dimple diameter result in smaller leakage under the condition of same area ratio; rotational speed of cylinder body hardly affects leakage; the leakage is directly proportional to work pressure of port plate pair. The results of the new calculating method can serve as guidance for selecting geometric parameter of micro-pits based on port plate pair’s working condition.

参考文献/References:

[1] 王彬.轴向柱塞泵平面配流副的润滑特性及其参数优化[D].杭州:浙江大学工学部,2009.
[2] 朱华,历建全,陆斌斌,等.变密度微圆坑表面织构在往复运动下的减摩作用[J].东南大学学报:自然科学版,2010,40(4):741-745.
  Zhu Hua,Li Jianquan,Lu Binbin,et al.Friction reduction effect of micro-round dimple surface texture with variable density in reciprocating[J].Journal of Southeast University:Natural Science Edition,2010,40(4):741-745.(in Chinese)
[3] Yu H,Wang X,Zhou F.Geometric shape effects of surface texture on the generation of hydrodynamic pressure between conformal contacting surfaces[J].Tribology Letters, 2010,37(2):123-130.
[4] Halperin G,Greenberg Y,Etsion I.Increasing mechanical seal life with laser-textured seal faces[C]//Proceedings of the 15th International Conf on Fluid Sealing.Maastricht,Netherlands:BHR Group,1997:3-11.
[5] Etsion I.Improving tribological performance of mechanical components by laser surface texturing[J].Tribology Letters,2004,17(4):733-737.
[6] 潘晓梅,彭旭东,李纪云.激光加工多孔端面机械密封泄漏量的影响因素[J].润滑与密封,2007,32(3):31-34.
  Pan Xiaomei,Peng Xudong,Li Jiyun.Factors affecting leakage rate of a laser surface textured mechanical seal[J].Lubrication Engineering,2007,32(3):31-34.(in Chinese)
[7] Siripuram R B,Stephens L S.Effect of deterministic asperity geometry on hydrodynamic lubrication[J].Journal of Tribology, 2004,126(3):527-534.
[8] Etsion I,Burstein L.A model for mechanical seals with regular microsurface structure[J].Tribology Transactions,1996,39(3):677-683.
[9] Kim T,Cho Y.Average flow model with elastic deformation for CMP[J].Tribology International,2006,39(11):1388-1394.
[10] Naduvinamani N B,Patil S B.Numerical solution of finite modified Reynolds equation for couple stress squeeze film lubrication of porous journal bearings[J].Computers &Structures,2009,87(21/22):1287-1295.
[11] Patir N,Cheng H S.An average flow model for determining effects of three-dimensional roughness on partial hydrodynamic lubrication[J].Journal of Lubrication Technology—Transactions of the ASME,1978,100(1):12-17.

备注/Memo

备注/Memo:
作者简介:邓海顺(1978—),男,博士生;王晓雷(联系人),男,博士,教授,博士生导师,xl_wang@nuaa.edu.cn.
基金项目:国家自然科学基金资助项目(50675101)、江苏省普通高校研究生科研创新计划资助项目(CX10B_093Z-05).
引文格式: 邓海顺,于海武,祁胜,等.规则分布微凹坑对配流副泄漏量的影响[J].东南大学学报:自然科学版,2012,42(1):72-76.[doi:10.3969/j.issn.1001-0505.2012.01.014]
更新日期/Last Update: 2012-01-20