[1]张源,杜垲,何嘉鹏,等.建筑构件热阻计算方法[J].东南大学学报(自然科学版),2012,42(1):77-82.[doi:10.3969/j.issn.1001-0505.2012.01.015]
 Zhang Yuan,Du Kai,He Jiapeng,et al.Calculation methods on thermal resistance of building components[J].Journal of Southeast University (Natural Science Edition),2012,42(1):77-82.[doi:10.3969/j.issn.1001-0505.2012.01.015]
点击复制

建筑构件热阻计算方法()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
42
期数:
2012年第1期
页码:
77-82
栏目:
材料科学与工程
出版日期:
2012-01-18

文章信息/Info

Title:
Calculation methods on thermal resistance of building components
作者:
张源1杜垲1何嘉鹏2杨柳1李彦军1
(1东南大学能源与环境学院,南京 210096)
(2南京工业大学城市建设与安全工程学院,南京 210009)
Author(s):
Zhang Yuan1Du Kai1He Jiapeng2Yang Liu1Li Yanjun1
(1School of Energy and Environment, Southeast University, Nanjing 210096, China)
(2College of Urban Construction and Safety Engineering, Nanjing University of Technology, Nanjing 210009, China)
关键词:
建筑节能围护结构空心砌块热阻数值模拟
Keywords:
building energy conservation building envelope hollow block thermal resistance numerical simulation
分类号:
TU522.01
DOI:
10.3969/j.issn.1001-0505.2012.01.015
摘要:
针对空心砌块平均热阻理论计算方法的简单近似性,分析了其计算结果的不确定性,提出用CFD数值模拟、采用有限体积法的计算方法分析建筑构件的热工性能.并分别运用热流计法与热箱法对某内插保温层混凝土空心砌块进行热阻测试,以检验理论计算方法与数值模拟计算方法的准确性.通过理论计算、数值模拟及试验验证分析得到:采用理论计算方法分析建筑构件热工性能具有不确定性,所得结果与热流计法和热箱法的试验结果误差分别为36.6%和33.8%; 采用CFD数值模拟方法计算结果误差分别为0.3%和2.4%,表明该方法对建筑构件热工性能的计算不仅能够满足精度要求,还具有应用范围广、结果直观等优点.
Abstract:
Considering the simple approximation of a theoretical calculation method on the average thermal resistance of hollow block, the uncertainty of the results calculated by this method was analyzed. A novel calculation method based on CFD(computational fluid dynamics) numerical simulation with finite volume method is proposed to evaluate the thermal characteristics of building components. The accuracy comparison between the CFD numerical method and the theoretical method was conducted by using heat flow meter method and hotbox method to test the thermal resistance of a concrete hollow block with inserting thermal insulation layer. Through the analysis of theoretical method, CFD numerical method and experimental validation, it is concluded that the thermal characteristics of building components from theoretical calculation method quoted in the paper are of uncertainty, the result errors of which are 36. 6% and 33. 8% in respect to the results of heat flow meter method and hotbox method. The result errors of CFD numerical simulation method are 0. 3% and 2. 4% respectively; the accuracy of the numerical simulation method is satisfactory, meanwhile, the method has advantages of wide application fields and visualized result presentation.

参考文献/References:

[1] Tsilingiris P T.Parametric space distribution effects of wall heat capacity and thermal resistance on the dynamic thermal behavior of walls and structures[J].Energy and Buildings,2006,38(10):1200-1211.
[2] Peng C,Wu Z.In situ measuring and evaluating the thermal resistance of building construction[J].Energy and Buildings,2008,40(11):2076-2082.
[3] Xu X,Wang S.Optimal simplified thermal models of building envelope based on frequency domain regression using genetic algorithm[J].Energy and Buildings,2007,39(5):525-536.
[4] Dos Santos G H,Mendes N.Heat,air and moisture transfer through hollow porous blocks[J].International Journal of Heat and Mass Transfer,2009,52(9/10):2390-2398.
[5] Del Coz Díaz J J,García Nieto P J,Betegón Biempica C,et al.Analysis and optimization of the heat-insulating light concrete hollow brick walls design by the finite element method[J].Applied Thermal Engineering,2007,27(8/9):1445-1456.
[6] Al-Jabri K S,Hago A W,Al-Nuaimi A S,et al.Concrete blocks for thermal insulation in hot climate[J].Cement and Concrete Research,2005,35(8):1472-1479.
[7] Alhazmy M M.Analysis of coupled natural convection-conduction effects on the heat transport through hollow building blocks[J].Energy and Buildings,2006,38(5):515-521.
[8] Antar M A,Baig H.Conjugate conduction-natural convection heat transfer in a hollow building block[J].Applied Thermal Engineering,2009,29(17/18):3716-3720.
[9] Alhazmy M M.Numerical investigation on using inclined partitions to reduce natural convection inside the cavities of hollow bricks[J].International Journal of Thermal Sciences,2010,49(11):2201-2210.
[10] Gao Y,Roux J J,Teodosiu C,et al.Reduced linear state model of hollow blocks walls,validation using hot box measurements[J].Energy and Buildings,2004,36(11):1107-1115.
[11] 朱盈豹.保温材料在建筑墙体节能中的应用[M].北京:中国建材工业出版社,2003:75.
[12] 韩占忠,王小敬,兰小平.FLUENT流体工程仿真计算的实例与应用[M].北京:北京理工大学出版社,2004:19.

备注/Memo

备注/Memo:
作者简介:张源(1983—),男,博士生;杜垲(联系人),男,教授,博士生导师,du-kai@seu.edu.cn.
基金项目:国家自然科学基金资助项目(51176029).
引文格式: 张源,杜垲,何嘉鹏,等.建筑构件热阻计算方法[J].东南大学学报:自然科学版,2012,42(1):77-82.[doi:10.3969/j.issn.1001-0505.2012.01.015]
更新日期/Last Update: 2012-01-20