[1]陈建栋,孙蓓蓓.基于流固热耦合仿真的微型空压机风冷系统[J].东南大学学报(自然科学版),2013,43(1):65-70.[doi:10.3969/j.issn.1001-0505.2013.01.013]
 Chen Jiandong,Sun Beibei.Micro-compressor air-cooling system based on fluid-solid thermal coupled simulation[J].Journal of Southeast University (Natural Science Edition),2013,43(1):65-70.[doi:10.3969/j.issn.1001-0505.2013.01.013]
点击复制

基于流固热耦合仿真的微型空压机风冷系统()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
43
期数:
2013年第1期
页码:
65-70
栏目:
机械工程
出版日期:
2013-01-20

文章信息/Info

Title:
Micro-compressor air-cooling system based on fluid-solid thermal coupled simulation
作者:
陈建栋孙蓓蓓
东南大学机械工程学院, 南京211189
Author(s):
Chen Jiandong Sun Beibei
School of Mechanical Engineering, Southeast University, Nanjing 211189, China
关键词:
微型空压机 流固热耦合仿真 数值仿真 轴流式风扇
Keywords:
micro-compressor fluid-solid thermal coupled simulation numerical simulation axial-flow fan
分类号:
TH457
DOI:
10.3969/j.issn.1001-0505.2013.01.013
摘要:
为解决微型空压机缸盖处过热问题,基于流固耦合传热理论,建立了微型空压机内部流场和温度场以及轴流式风扇的数值计算模型.数值仿真结果表明,原空压机流道设计不合理,冷却空气在机架处回流严重,影响缸盖散热.通过改变轴流式风扇的吹风方向解决了冷却空气在机架处回流的问题,通过优化出风口尺寸以及风扇参数,提高了冷却空气的流量,从而使微型空压机冷却空气流量由13.55 g/s增加至23.51 g/s,缸盖处温度由388.9 K降低至362.9 K,解决了缸盖处过热的问题.
Abstract:
In order to solve the overheating of micro-compressor cylinder cover, a numerical model to compute airflow field and temperature field is set up according to the theory of fluid-solid coupled heat transfer. A numerical model of axial-flow fan is also set up. The numerical simulation results show that the airflow channel design of the original micro-compressor is unreasonable, and the reflow of cooling air at motor frame is severe which affects the cooling performance of cylinder cover. By changing the blowing direction of the axial-flow fan, the problem of cooling air reflow is solved. Also, by optimizing the size of outlets and the parameters of the fan, the flow of cooling air is increased. Through these measures, the flow of cooling air is increased from 13.55 g/s to 23.51 g/s, and the temperature of cylinder is decreased from 388.9 K to 362.9 K. Thus, the overheating of micro-compressor cylinder cover is solved.

参考文献/References:

[1] 唐梓杰,丁水汀,杜发荣.小型航空二冲程风冷发动机缸体流固耦合传热的仿真[J].航空动力学报,2011,26(1):42-47.
  Tang Zijie, Ding Shuiting, Du Farong. Simulation of fluid-solid coupled heat transfer of cylinder of a small two-stroke air-cooled aero-engine[J]. Journal of Aerospace Power, 2011, 26(1): 42-47.(in Chinese)
[2] Sun Zixiang, Chew John W. Numerical simulation of complex air flow in an aero engine gear box[C] //Proceedings of ASME Turbo Expo. Orlando, LF, USA, 2009:1197-1206.
[3] 刘卫华,夏文庆,昂海松.风冷压缩机气缸冷却效果的实验研究[J].南京航空航天大学学报,2002,34(5):493-497.
  Liu Weihua,Xia Wenqing,Ang Haisong. Cooling effect on cylinder wall of compressor[J]. Journal of Nanjing University of Aeronautics & Astronautics, 2002,34(5):493-497.(in Chinese)
[4] 谢永奇,余建组,高红霞.直升机动力舱通风冷却系统仿真[J].航空动力学报,2006,21(2):297-302.
  Xie Yongqi, Yu Jianzu, Gao Hongxia. Simulation study on helicopter nacelle ventilation cooling system[J]. Journal of Aerospace Power, 2006, 21(2): 297-302.(in Chinese)
[5] Piccione Rocco, Bova Sergio. Engine rapid shutdown: experimental investigation on the cooling system transient response[J]. Journal of Engineering for Gas Turbines and Power, 2010, 132(7):11-19.
[6] Karng Sarng Woo, Shin Jae-Hoon, Han Hun Sik, et al. Thermal performance of a thermoelectric air-cooling system with heat sinks[C]//12th IEEE Intersociety Conference on Thermal and Thermo Mechanical Phenomena in Electronic System. Las Vegas, NV, USA, 2010:1-7.
[7] 傅秦生.热工基础与应用[M].北京:机械工业出版社,2007: 24-30.
[8] 周建辉,杨春信.CPU轴流式风扇参数化设计模拟及其应用[J].电子学报,2008,36(8):1527-1531.
  Zhou Jianhui, Yang Chunxin. Parametric design and numerical simulation of CPU axial-flow fan with application[J]. Acta Electronica Sinica, 2008,36(8):1527-1531.(in Chinese)
[9] Lee Ki-Sang, Kim Kwang-Yong, Samad Abdus. Design optimization of low-speed axial flow fan blade with three-dimensional RANS analysis[J]. Journal of Mechanical Science and Technology, 2008, 22(10):1864-1869.
[10] Liu Szuhsien, Huang Rongfung, Lin Chuangan. Computational and experimental investigations of performance curve of an axial flow fan using downstream flow resistance method[J]. Experiment Thermal and Fluid Science, 2010, 34(7):827-837.
[11] Akturk Ali, Camci Cengiz. Axial flow fan tip leakage flow control using tip platform extensions[J]. Journal of Fluids Engineering, 2010, 132(5):051109-1-051109-10.

备注/Memo

备注/Memo:
作者简介: 陈建栋(1988—),男,博士生;孙蓓蓓(联系人),女,博士,教授,博士生导师,bbsun@seu.edu.cn.
基金项目: 江苏省“六大人才高峰”资助项目(1102000137).
引文格式: 陈建栋,孙蓓蓓.基于流固热耦合仿真的微型空压机风冷系统[J].东南大学学报:自然科学版,2013,43(1):65-70. [doi:10.3969/j.issn.1001-0505.2013.01.013]
更新日期/Last Update: 2013-01-20