参考文献/References:
[1] 孙志春,郭永红,肖海平,等.鼓泡脱硫塔除雾器除雾特性数值研究及实验验证[J].中国电机工程学报,2010,30(8):68-75.
Sun Zhichun, Guo Yonghong, Xiao Haiping, et al. Numerical simulation and experimental validation on demisting characteristic of the mist eliminator for jet bubble reactor dusulfurization system[J]. Proceedings of the CSEE, 2010,30(8):68-75.(in Chinese)
[2] 姚杰,仲兆平,周山明. 湿法烟气脱硫带钩波纹板除雾器结构优化数值模拟[J].中国电机工程学报,2010,30(14):61-67.
Yao Jie, Zhong Zhaoping, Zhou Shanming. Numerical simulation on wave-plate demister with hamulus in wet flue gas desulfurization[J]. Proceedings of the CSEE, 2010, 30(14):61-67.(in Chinese)
[3] 赵健植,金保升,仲兆平,等.基于响应曲面法的除雾器叶片效率模拟[J].中国电机工程学报,2007,27(23):61-65.
Zhao Jianzhi, Jin Baosheng, Zhong Zhaoping, et al. Simulation study of separation efficiency of demister vane based on response surface methodology[J]. Proceedings of the CSEE, 2007, 27(23): 61-65.(in Chinese)
[4] James P W, Azzopardi B J, Wang Y. A model for liquid film flow and separation in a wave-plate mist eliminator[J]. Chemical Engineering Research and Design, 2005, 83(5): 469-477.
[5] Chiara G, Elisabetta B, Leonardo T. A numerical model for gas flow and droplet motion in wave-plate mist eliminators with drainage channels[J]. Chemical Engineering Science, 2008, 63(23): 5639-5652.
[6] 高正阳,郭振,胡佳琪,等.基于支持向量机与数值法的W火焰锅炉多目标燃烧优化及火焰重建[J].中国电机工程学报,2011,31(5):13-19.
Gao Zhengyang, Guo Zhen, Hu Jiaqi, et al. Multi-objective combustion optimization and flame reconstruction for W shaped boiler based on support vector regression and numerical simulation[J]. Proceedings of the CSEE, 2011, 31(5): 13-19.(in Chinese)
[7] 金保升,赵健植,仲兆平,等. 基于响应曲面法研究喷淋塔的脱硫效率[J]. 东南大学学报:自然科学版,2007,37(3): 446-450.
Jin Baosheng, Zhao Jianzhi, Zhong Zhaoping, et al.Desulphurization efficiency with spray tower by response surface methodology[J]. Journal of Southeast University: Natural Science Edition,2007, 37(3): 446-450.(in Chinese)
[8] Suykens J A K. Least squares support vector machines [M]. Singapore:World Scientific Pubishing Co Pte Ltd, 2002.
[9] Suykens J A K, Vandewalle J. Least squares support vector machine classifiers[J]. Neural Processing Letters, 1999, 9(3): 293-300.
[10] de Brabanter K, Karsmakers P, de Brabanter J, et al. Confidence bands for least squares support vector machine classifiers: a regression approach [J]. Pattern Recognition, 2012, 45(6): 2280-2287.
[11] 任露泉.试验设计及其优化[M].北京:科学出版社,2009:238-242.
[12] 雷英杰,张善文,李续武,等.Matlab遗传算法工具箱及应用[M].西安:西安电子科技大学出版社,2005.
相似文献/References:
[1]王秋颖,顾璠.DBD固体燃料液化多相介质作用机理分析[J].东南大学学报(自然科学版),2010,40(4):800.[doi:10.3969/j.issn.1001-0505.2010.04.026]
Wang Qiuying,Gu Fan.Mechanism analysis of multiphase mediums interaction of solid fuels liquefaction by dielectric barrier discharge plasma[J].Journal of Southeast University (Natural Science Edition),2010,40(1):800.[doi:10.3969/j.issn.1001-0505.2010.04.026]
[2]耿凡,袁竹林,王宏生,等.流化床中烟丝颗粒的流动特性[J].东南大学学报(自然科学版),2009,39(5):1012.[doi:10.3969/j.issn.1001-0505.2009.05.029]
Geng Fan,Yuan Zhulin,Wang Hongsheng,et al.Fluidization characteristics of tobacco particles in fluidized bed[J].Journal of Southeast University (Natural Science Edition),2009,39(1):1012.[doi:10.3969/j.issn.1001-0505.2009.05.029]
[3]王浩,李爱群,谢以顺,等.基于实测风谱的润扬悬索桥桥址区三维脉动风场模拟[J].东南大学学报(自然科学版),2009,39(6):1206.[doi:10.3969/j.issn.1001-0505.2009.06.023]
Wang Hao,Li Aiqun,Xie Yishun,et al.Digital simulation of 3-dimensional turbulence wind field of Runyang Suspension Bridge based on measured wind spectra[J].Journal of Southeast University (Natural Science Edition),2009,39(1):1206.[doi:10.3969/j.issn.1001-0505.2009.06.023]
[4]艾亿谋,杜成斌,居发亮.基于电阻率的混凝土裂缝测量方法[J].东南大学学报(自然科学版),2008,38(2):289.[doi:10.3969/j.issn.1001-0505.2008.02.021]
Ai Yimou,Du Chengbin,Ju Faliang.Concrete crack measurement by electrical resistivity[J].Journal of Southeast University (Natural Science Edition),2008,38(1):289.[doi:10.3969/j.issn.1001-0505.2008.02.021]
[5]杨迎春,陈永平,施明恒,等.恒壁温下梯形硅微通道热沉流动换热特性[J].东南大学学报(自然科学版),2008,38(4):647.[doi:10.3969/j.issn.1001-0505.2008.04.020]
Yang Yingchun,Chen Yongping,Shi Mingheng,et al.Heat transfer in trapezoidal silicon microchannel heat sinks with constant wall temperature[J].Journal of Southeast University (Natural Science Edition),2008,38(1):647.[doi:10.3969/j.issn.1001-0505.2008.04.020]
[6]梁坤峰,彭正标,袁竹林.液-液循环流化床制冰过程的火用分析[J].东南大学学报(自然科学版),2006,36(5):774.[doi:10.3969/j.issn.1001-0505.2006.05.019]
Liang Kunfeng,Peng Zhengbiao,Yuan Zhulin.Exergy analysis of ice-making process for liquid-liquid circulating fluidized bed[J].Journal of Southeast University (Natural Science Edition),2006,36(1):774.[doi:10.3969/j.issn.1001-0505.2006.05.019]
[7]潘华,邱洪兴.钢筋混凝土受弯构件正截面疲劳性能数值模拟[J].东南大学学报(自然科学版),2006,36(6):997.[doi:10.3969/j.issn.1001-0505.2006.06.025]
Pan Hua,Qiu Hongxing.Numerical simulation of fatigue performance of reinforced concrete flexural components[J].Journal of Southeast University (Natural Science Edition),2006,36(1):997.[doi:10.3969/j.issn.1001-0505.2006.06.025]
[8]施明恒,王兴春,蔡辉.太阳能毛细驱动喷射式空调器性能模拟研究[J].东南大学学报(自然科学版),2005,35(1):69.[doi:10.3969/j.issn.1001-0505.2005.01.015]
Shi Mingheng,Wang Xingchun,Cai Hui.Numerical simulation of the performance of a capillary thermal driven ejector refrigerator[J].Journal of Southeast University (Natural Science Edition),2005,35(1):69.[doi:10.3969/j.issn.1001-0505.2005.01.015]
[9]杨兰兰,屠彦,王保平.PDP放电特性二维流体数值模拟的加速方法[J].东南大学学报(自然科学版),2005,35(5):678.[doi:10.3969/j.issn.1001-0505.2005.05.005]
Yang Lanlan,Tu Yan,Wang Baoping.Speeding up method in 2D fluid numerical simulation of PDP discharge characteristics[J].Journal of Southeast University (Natural Science Edition),2005,35(1):678.[doi:10.3969/j.issn.1001-0505.2005.05.005]
[10]高海鹰,张奇.污染物在受潮汐影响的地下水中输移的模拟[J].东南大学学报(自然科学版),2005,35(6):950.[doi:10.3969/j.issn.1001-0505.2005.06.026]
Gao Haiying,Zhang Qi.Modeling of contaminant transport in groundwater with impact of tide[J].Journal of Southeast University (Natural Science Edition),2005,35(1):950.[doi:10.3969/j.issn.1001-0505.2005.06.026]