[1]张磊,张志胜,周一帆,等.一种共用定位销的多工序夹具布局优化设计准则[J].东南大学学报(自然科学版),2013,43(3):498-502.[doi:10.3969/j.issn.1001-0505.2013.03.010]
 Zhang Lei,Zhang Zhisheng,et al.Optimal design criterion for multi-stage fixture layout with a shared locating pin[J].Journal of Southeast University (Natural Science Edition),2013,43(3):498-502.[doi:10.3969/j.issn.1001-0505.2013.03.010]
点击复制

一种共用定位销的多工序夹具布局优化设计准则()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
43
期数:
2013年第3期
页码:
498-502
栏目:
机械工程
出版日期:
2013-05-20

文章信息/Info

Title:
Optimal design criterion for multi-stage fixture layout with a shared locating pin
作者:
张磊12张志胜1周一帆1戴敏1史金飞1
1东南大学机械工程学院, 南京 211189; 2徐州工程学院机电工程学院, 徐州 221018
Author(s):
Zhang Lei1 2 Zhang Zhisheng1 Zhou Yifan1 Dai Min1 Shi Jinfei1
1 School of Mechanical Engineering, Southeast University, Nanjing 211189, China
2 School of Mechanical and Electrical Engineering, Xuzhou Institute of Technology, Xuzhou 221018, China
关键词:
多工序 夹具布局 状态空间模型 定位销
Keywords:
multi-stage fixture layout state space model locating pin
分类号:
TH161
DOI:
10.3969/j.issn.1001-0505.2013.03.010
摘要:
针对多工序装配过程中一种共用定位销的夹具布局优化设计问题,提出了一种设计计算准则.首先,由状态空间方程推导出用于描述多工序装配过程单一零件尺寸偏差状态传递和累积的状态空间模型.之后,采用数学公式推导和统计学方法由该模型得到了用于描述关键产品特征平移偏差和角位移偏差间关系的协方差矩阵.依据该矩阵的统计学意义,提取矩阵的迹作为夹具布局优化设计计算准则.采用一四工序的装配实例,由交换算法进行验证.结果表明,与传统设计准则相比,所提出的夹具布局优化设计准则使用点的平面欧式距离计算代替了复杂的高维矩阵计算,不仅和传统设计准则同样有效,而且计算效率更高,节约了计算成本.
Abstract:
The optimal design of fixture layout with a shared locating pin in a multi-stage assembly process is brought into focus and a novel optimal design criterion is proposed. First, a state space model for individual parts variation propagation and accumulation is developed based on the common state space equations. Then, using mathematical and statistical methods, a covariance matrix is derived from the presented model to describe the relationship between translation deviations and angular rotation deviations of the key product characteristics. According to its statistical meaning, the trace of the covariance matrix is extracted as the optimal design criterion for the design of fixture layout. Through a four-stage assembly example and using an exchange algorithm, the proposed criterion is proved to be effective and more efficient than the traditional one, since the calculation of the high-dimensional complicated matrices is replaced by the calculation of Euclidean distance.

参考文献/References:

[1] Asada H, By A. Kinematic analysis of workpart fixturing for flexible assembly with automatically reconfigurable fixtures [J]. IEEE Transactions on Robot and Automation, 1985, 1(2): 86-93.
[2] Carlson J S. Quadratic sensitivity analysis of fixtures and locating schemes for rigid parts [J]. Journal of Manufacturing Science and Engineering, 2001, 123(3): 462-472.
[3] Zhang X P, Yang W Y, Li M. An uncertainty approach for fixture layout optimization using Monte Carlo method [C]//Proceedings of the Third International Conference on Intelligent Robotics and Applications. Shanghai, China, 2010: 10-21.
[4] Liu Z H, Wang M Y, Wang K D, et al. Multi-objective optimization design of a fixture layout considering locator displacement and force-deformation [J]. International Journal of Advanced Manufacturing Technology, 2012. doi:10.1007/s00170-012-4564-7.
[5] Selvakumar S, Arulshri K, Padmanaban K, et al.Design and optimization of machining fixture layout using ANN and DOE [J]. International Journal of Advanced Manufacturing Technology, 2012. doi:10.1007/s00170-012-4281-2.
[6] Dou J P, Wang X S, Wang L. Machining fixture layout optimisation under dynamic conditions based on evolutionary techniques [J]. International Journal of Production Research, 2012, 15(50): 4294-4315.
[7] Jin J H, Shi J J. State space modeling of sheet metal assembly for dimensional control [J]. Journal of Manufacturing Science and Engineering, 1999, 121(4): 756-762.
[8] Kim P, Ding Y. Optimal design of fixture layout in multistation assembly process [J]. IEEE Transactions on Automation Science and Engineering, 2004, 1(2): 133-145.
[9] Kim P, Ding Y. Optimal engineering design guided by data-mining methods [J]. Technometrics, 2005, 47(3): 336-348.
[10] Tian Z Q, Lai X M, Lin Z Q. Robust fixture layout design for multi-station sheet metal assembly processes using a genetic algorithm [J]. International Journal of Production Research, 2009, 47(21): 6159-6176.
[11] Izquierdo L E, Hu S J, Du H, et al. Robust fixture layout design for a product family assembled in a multistage reconfigurable line [J]. Journal of Manufacturing Science and Engineering, 2009, 131(4): 81-89.
[12] Cook R D, Nachtsheim C J. A comparison for constructing exact D-optimal designs [J]. Technometrics, 1980, 22(3): 315-324.

备注/Memo

备注/Memo:
作者简介: 张磊(1978—),男,博士生; 张志胜(联系人),男,博士,教授,博士生导师,oldbc@seu.edu.cn.
基金项目: 国家自然科学基金资助项目(71201025)、江苏省自然科学基金资助项目(BK2011608)、高等学校博士学科点专项科研基金资助项目(20110092120007).
引文格式: 张磊,张志胜,周一帆,等.一种共用定位销的多工序夹具布局优化设计准则[J].东南大学学报:自然科学版,2013,43(3):498-502. [doi:10.3969/j.issn.1001-0505.2013.03.010]
更新日期/Last Update: 2013-05-20