[1]仲济涛,刘钊.不同预应力度简支梁拉压杆模型[J].东南大学学报(自然科学版),2013,43(5):962-966.[doi:10.3969/j.issn.1001-0505.2013.05.011]
 Zhong Jitao,Liu Zhao.Strut-and-tie model of simply supported beams under different prestressing degree[J].Journal of Southeast University (Natural Science Edition),2013,43(5):962-966.[doi:10.3969/j.issn.1001-0505.2013.05.011]
点击复制

不同预应力度简支梁拉压杆模型()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
43
期数:
2013年第5期
页码:
962-966
栏目:
交通运输工程
出版日期:
2013-09-20

文章信息/Info

Title:
Strut-and-tie model of simply supported beams under different prestressing degree
作者:
仲济涛刘钊
东南大学混凝土及预应力混凝土结构教育部重点实验室, 南京 210096
Author(s):
Zhong Jitao Liu Zhao
Key Laboratory of Concrete and Prestressed Structural of Ministry of Education, Southeast University, Nanjing 210096, China
关键词:
预应力 简支梁 拉压杆 构形
Keywords:
prestress simply supported beam strut-and-tie model configuration
分类号:
U441
DOI:
10.3969/j.issn.1001-0505.2013.05.011
摘要:
为研究预应力混凝土简支梁的传力路径及其拉压杆模型设计方法,提出一种改进的双向渐进结构优化算法.按照Von Mises应力准则,以单元应变能为结构性能指标,自行编制了单元生死并行的双向渐进结构拓扑优化程序,实现了混凝土结构拉压杆模型的自动构形.优化程序中引入单元生长与删除加速度因子,有效防止了无效拓扑的出现.通过把预应力等效为外部荷载,将寻找预应力混凝土梁拉压杆模型的问题转化为连续结构的拓扑优化问题.在此基础上讨论了不同预应力度下混凝土简支梁的受力行为并揭示了其合理的力学模型:钢筋混凝土梁可采用桁架模型,部分预应力梁可采用桁架-拱叠合模型,全预应力梁可采用拱模型或拱-桁叠合模型.
Abstract:
To investigate the load path and the strut-and-tie models(STM)of the prestressed concrete simply supported beam, an improved approach based on bi-directional evolutionary structural optimization(BESO)is presented. According to the Von Mises stress criterion, a programmed procedure on BESO is used to realize automatic generation of STM for concrete structures, in which two accelerate factors are introduced to prevent invalid topology process. The searching procedure for STM of prestressed concrete beams is converted into the topology optimization problem of elastic continuum. Then, the mechanical behaviors of the prestressed concrete simply supported beam under different degrees of prestress are studied. Reasonable mechanical models are put forward; that is, the truss model can be adopted in reinforced concrete beams, the truss-arch combined model for partially prestressed concrete beams, and the arch model or the arch-truss combined model for fully prestressed concrete beams.

参考文献/References:

[1] Schlaich J, Schafer K, Jennewein M. Toward a consistent design of structural concrete [J]. Journal of the Prestressed Concrete Institute, 1987, 32(3): 74-150.
[2] Collins M P, Mitchell D. A rational approach for shear design [J]. ACI Structural Journal, 1986, 83(6): 925-933.
[3] Collins M P, Mitchell D. Shear and torsion design of prestressed and nonprestressed concrete beams [J]. PCI Journal, 1980, 25(2): 32-100.
[4] American Association of State Highway and Transportation Officials. AASHTO LRFD bridge specifications [S]. Washington: John Wiley & Sons, 2007.
[5] ACI Committee 318. ACI 318M—08 Building code requirements for structural concrete and commentary [S]. Michigan, USA: American Concrete Institute, 2008.
[6] Kumar P. Optimal force transmission in reinforced concrete deep beams [J]. Computers & Structures, 1978, 8(2): 223-229.
[7] Ali M A, White R N. Automatic generation of truss model for optimal design of reinforced concrete structures [J]. ACI Structural Journal, 2001, 98(4): 431-442.
[8] Liang Q Q. Topology optimization of strut-and-tie models in reinforced concrete structures using an evolutionary procedure [J]. ACI Structural Journal, 2000, 97(2): 322-332.
[9] Bruggi M. Generating strut-and-tie patterns for reinforced concrete structures using topology optimization [J]. Computers & Structures, 2009, 87(23/24): 1483-1495.
[10] Liang Q Q. Generating optimal strut-and-tie models in prestressed concrete beams by performance-based optimization [J]. ACI Structural Journal, 2001, 98(2): 226-232.
[11] Bruggi M. On the automatic generation of strut and tie patterns under multiple load cases with application to the aseismic design of concrete structures [J]. Advances in Structural Engineering, 2010, 13(6): 1167-1181.
[12] Biondini F, Bontempi F. Optimal strut-and-tie models in reinforced concrete structures [J]. Computer Assisted Mechanics and Engineering Sciences, 1999, 6(3): 279-293.
[13] Biondini F, Bontempi F. Stress path adapting strut-and-tie models in cracked and uncracked R.C. elements [J]. Structural Engineering and Mechanics, 2001, 12(6): 685-698.
[14] Kwak H G, Noh S H. Determination of strut-and-tie models using evolutionary structural optimization [J]. Engineering Structures, 2006, 28(10): 1440-1449.
[15] He Z Q, Liu Z. Optimal three-dimensional strut-and-tie models for anchorage diaphragms in externally prestressed bridges [J]. Engineering Structures, 2010, 32(8): 2057-2064.
[16] Tanskanen P. The evolutionary structural optimization method theoretical aspects [J]. Computer Methods in Applied Mechanics and Engineering, 2002, 191(47/48): 5485-5498.

相似文献/References:

[1]蔡小宁,孟少平,孙巍巍,等.预应力预制混合装配双肢墙弹塑性性能[J].东南大学学报(自然科学版),2010,40(6):1257.[doi:10.3969/j.issn.1001-0505.2010.06.025]
 Cai Xiaoning,Meng Shaoping,Sun Weiwei,et al.Elastoplastic performances of prestressed precast hybrid coupled wall[J].Journal of Southeast University (Natural Science Edition),2010,40(5):1257.[doi:10.3969/j.issn.1001-0505.2010.06.025]
[2]冯健,张耀康.预应力斜拉网格结构的静力优化分析[J].东南大学学报(自然科学版),2003,33(5):583.[doi:10.3969/j.issn.1001-0505.2003.05.010]
 Feng Jian,Zhang Yaokang.Static optimizing analysis of prestressed cable-stayed space truss structure[J].Journal of Southeast University (Natural Science Edition),2003,33(5):583.[doi:10.3969/j.issn.1001-0505.2003.05.010]
[3]李宏江,叶见曙,王康.旧钢筋混凝土简支梁桥承载潜力因素分析[J].东南大学学报(自然科学版),2001,31(3):94.[doi:10.3969/j.issn.1001-0505.2001.03.023]
 Li Hongjiang,Ye Jianshu,Wang Kang.Potential Load-Bearing Capacity Factors’ Analysis of Old Reinforced Concrete Simple-Supported Beam Bridges[J].Journal of Southeast University (Natural Science Edition),2001,31(5):94.[doi:10.3969/j.issn.1001-0505.2001.03.023]
[4]张继文.预应力加固构件的边界约束对加固效能的影响[J].东南大学学报(自然科学版),2000,30(4):63.[doi:10.3969/j.issn.1001-0505.2000.04.012]
 Zhang Jiwen.Influence of the Boundary Condition on the Effective Performance of the Strengthened Members[J].Journal of Southeast University (Natural Science Edition),2000,30(5):63.[doi:10.3969/j.issn.1001-0505.2000.04.012]
[5]郑文忠,俞伟根,吕志涛.后张预应力平板-柱结构实用设计方法的研究[J].东南大学学报(自然科学版),1994,24(6):32.[doi:10.3969/j.issn.1001-0505.1994.06.006]
 Zheng Wenzhong,Yu Weigen,et al.Research on Practical Method for Design of Post-Tensioned Flat Slab-Column Structures[J].Journal of Southeast University (Natural Science Edition),1994,24(5):32.[doi:10.3969/j.issn.1001-0505.1994.06.006]
[6]卫龙武.求解弹性支撑加固结构内力的新方法[J].东南大学学报(自然科学版),1991,21(4):140.[doi:10.3969/j.issn.1001-0505.1991.04.022]
 [J].Journal of Southeast University (Natural Science Edition),1991,21(5):140.[doi:10.3969/j.issn.1001-0505.1991.04.022]
[7]王文炜,翁昌年,杨威.新老混凝土组合梁混凝土收缩徐变试验研究[J].东南大学学报(自然科学版),2008,38(3):505.[doi:10.3969/j.issn.1001-0505.2008.03.028]
 Wang Wenwei,Weng Changnian,Yang Wei.Experimental study on creep and shrinkage of old and new concrete composite beams[J].Journal of Southeast University (Natural Science Edition),2008,38(5):505.[doi:10.3969/j.issn.1001-0505.2008.03.028]
[8]张继文,陈乾.预应力锚固损失的计算研究[J].东南大学学报(自然科学版),1996,26(6):75.[doi:10.3969/j.issn.1001-0505.1996.06.015]
 Zhang Jiwen,Chen Qian,Chen Qian.Calculation of the Anchorage Loss of Prestress in Tendons[J].Journal of Southeast University (Natural Science Edition),1996,26(5):75.[doi:10.3969/j.issn.1001-0505.1996.06.015]
[9]舒赣平,吕志涛,段建中.预应力连续钢梁的理论分析与试验研究[J].东南大学学报(自然科学版),1994,24(3):40.[doi:10.3969/j.issn.1001-0505.1994.03.007]
 Shu Ganping,Lu,Zhitao Duan,et al.Theoretical Analysis and Experimental Research of Prestressed-Steel Continuous Beam[J].Journal of Southeast University (Natural Science Edition),1994,24(5):40.[doi:10.3969/j.issn.1001-0505.1994.03.007]

备注/Memo

备注/Memo:
作者简介: 仲济涛(1985—),男,博士生;刘钊(联系人),男,教授,博士生导师,mr.liuzhao@seu.edu.cn.
基金项目: 国家自然科学基金资助项目(51278120).
引文格式: 仲济涛,刘钊.不同预应力度简支梁拉压杆模型[J].东南大学学报:自然科学版,2013,43(5):962-966. [doi:10.3969/j.issn.1001-0505.2013.05.011]
更新日期/Last Update: 2013-09-20