[1]廖昕,张建润,冯涛,等.采煤机中部槽极限工况下强度非线性分析[J].东南大学学报(自然科学版),2014,44(3):531-537.[doi:10.3969/j.issn.1001-0505.2014.03.015]
 Liao Xin,Zhang Jianrun,Feng Tao,et al.Intensity nonlinear analysis of central groove of coal shearer under limiting conditions[J].Journal of Southeast University (Natural Science Edition),2014,44(3):531-537.[doi:10.3969/j.issn.1001-0505.2014.03.015]
点击复制

采煤机中部槽极限工况下强度非线性分析()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
44
期数:
2014年第3期
页码:
531-537
栏目:
机械工程
出版日期:
2014-05-16

文章信息/Info

Title:
Intensity nonlinear analysis of central groove of coal shearer under limiting conditions
作者:
廖昕张建润冯涛李普
东南大学机械工程学院, 南京 211189
Author(s):
Liao Xin Zhang Jianrun Feng Tao Li Pu
School of Mechanical Engineering, Southeast University, Nanjing 211189, China
关键词:
哑铃销 中部槽 非线性运动 塑性变形 接触分析
Keywords:
dumbbell pin central groove non-linear motion plastic deformation contact analysis
分类号:
TH227
DOI:
10.3969/j.issn.1001-0505.2014.03.015
摘要:
为了改善中部槽容易破损、成本高等问题,对某型号中部槽-哑铃销进行非线性有限元法建模,并采用接触的方法分析采煤机在不同极限工况下的非线性运动.通过对比非线性接触变化和力学特性,研究哑铃销与中部槽各自发生高度塑性变形时产生的相互作用.数值仿真结果表明,哑铃销与槽体弧形侧接触部位受到的应力过大,中部槽弧形侧塑性形变量严重.以此建立优化目标,对哑铃销与中部槽的结构尺寸进行数值优化匹配.结果表明:哑铃销轴中段部位半径减小2.0mm且槽帮弧形处厚度增加30mm能够有效改善塑性失效行为;哑铃销发生断裂能够对中部槽起到同步保护的作用.
Abstract:
To avoid breakage and reduce cost effectively, a non-linear finite element model for some kind of central groove-dumbbell pin is built. The non-linear motions of the coal shearer under different limiting conditions are analyzed by contact approach. The interactions during the high plastic deformations of the dumbbell pins and the central grooves are studied based on the non-linear contact varieties and mechanical properties. The numerical simulation results show that the stresses at the contact regions between the dumbbell pins and the groove curved walls are excessive, and the plastic deformations at the groove curved walls are severe. On this basis, the optimization objective is established, and the structure sizes of the dumbbell pins and the central grooves are matched by numerical optimization. The results show that the plastic failure behavior can be improved effectively by reducing the radius of the dumbbell pin shaft middle section by 2.0mm and increasing the thickness of the groove curved wall by 30mm. The central groove can be protected simultaneously when the dumbbell pin is broken.

参考文献/References:

[1] Zhang Dongjin, Liu Di, Zhao Xinying, et al. Research on state monitoring method of coal shearer vibration[J].Advanced Materials Research, 2013, 694-697: 449-452.
[2] Zhang Jun. Research on method of coal shearer states monitoring[J].Advanced Materials Research, 2013, 706-708: 963-967.
[3] Zhai Xinxian, Shao Qiang, Li Baofu, et al. Shearer mining application to soft thin-seam with hard roof[C]//Proceedings of International Conference on Mining Science & Technology. Xuzhou,China, 2009, 68-75.
[4] 白晓辉,任中全,刘海燕.刮板输送机中部槽弯曲角度设计计算[J].煤矿机械,2011, 32(6): 21-22.
  Bai Xiaohui, Ren Zhongquan, Liu Haiyan. Design calculation of rotated angle of middle trough in scraper conveyor[J].Coal Mine Machinery, 2011, 32(6): 21-22.(in Chinese)
[5] 郑天刚.综采工作面重型刮板输送机中部槽的设计[J].科技信息,2010(3): 110-111.
  Zheng Tiangang. Design of the central groove of fully mechanized working face heavy scraper conveyor[J]. Science & Technology Information,2010(3): 110-111.(in Chinese)
[6] Evenden M P, Edwards J S. Cutting theory and coal seam assessment techniques and their application to shearer design[J]. Mining Science and Technology, 1985, 2(4): 253-270.
[7] 张超军,张志民,王宏洋. 刮板输送机中部槽的耐磨处理[J].煤矿机械,2007,28(6): 109-110.
  Zhang Chaojun,Zhang Zhimin,Wang Hongyang. Shave central section slot treatment able to endure transporting machine paper[J]. Coal Mine Machinery, 2007, 28(6): 109-110.(in Chinese)
[8] Hu T, Jaydev P D. Characterization of soft-tissue material properties: large deformation analysis[J].Medical Simulation, 2004, 3078: 28-37.
[9] Xu Dongyang, Liang Liangjin, Jia Chunli, et al. Explosion simulation and analysis of coal mine rescue capsule[J].Applied Mechanics and Materials, 2011, 143/144: 536-540.
[10] Wu Weidong, Li Hualiang, Xue Hongrui. Dynamic analysis of planetary mechanism for the cutting part of coal shearer[J].Applied Mechanics and Materials, 2012, 160: 356-360.
[11] Smojver I,Ivancˇevic’ D. Bird strike damage analysis in aircraft structures using abaqus/explicit and coupled eulerian lagrangian approach[J].Composites Science and Technology, 2011, 71(4): 489-498.
[12] 张燎军.水工结构接触问题的力学模型及其在三峡工程中的应用[D].南京:河海大学土木工程学院,2005.
[13] 王勖成.有限单元法[M].北京:清华大学出版社,2003: 666-701.
[14] 杨骊先. 弹性力学及有限单元法[M].杭州:浙江大学出版社, 2009: 163-171.

备注/Memo

备注/Memo:
收稿日期: 2013-11-28.
作者简介: 廖昕(1987—),女,博士生;张建润(联系人),男,博士,教授,博士生导师,zhangjr@seu.edu.cn.
基金项目: 国家科技重大专项资金资助项目(2013ZX04012032)、江苏省科技成果转化专项资金资助项目(BA2008074).
引用本文: 廖昕,张建润,冯涛,等.采煤机中部槽极限工况下强度非线性分析[J].东南大学学报:自然科学版,2014,44(3):531-537. [doi:10.3969/j.issn.1001-0505.2014.03.015]
更新日期/Last Update: 2014-05-20