[1]汤传业,陈熙源.一种角速率输入的捷联惯导姿态算法[J].东南大学学报(自然科学版),2014,44(3):544-549.[doi:10.3969/j.issn.1001-0505.2014.03.017]
 Tang Chuanye,Chen Xiyuan.An angular rate input attitude algorithm in SINS[J].Journal of Southeast University (Natural Science Edition),2014,44(3):544-549.[doi:10.3969/j.issn.1001-0505.2014.03.017]
点击复制

一种角速率输入的捷联惯导姿态算法()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
44
期数:
2014年第3期
页码:
544-549
栏目:
其他
出版日期:
2014-05-16

文章信息/Info

Title:
An angular rate input attitude algorithm in SINS
作者:
汤传业陈熙源
东南大学微惯性仪表与先进导航技术教育部重点实验室, 南京 210096
Author(s):
Tang Chuanye Chen Xiyuan
Key Laboratory of Micro-Inertial Instrument and Advanced Navigation Technology of Ministry of Education, Southeast University, Nanjing 210096, China
关键词:
角速率 姿态算法 圆锥补偿 频域泰勒方法
Keywords:
angular rate attitude algorithm coning correction frequency Taylor method
分类号:
V241.6
DOI:
10.3969/j.issn.1001-0505.2014.03.017
摘要:
为提高角速率输入的捷联惯导系统姿态解算圆锥补偿精度,给出一种新的角速率输入的圆锥补偿结构,该结构中引入了角速率拟合的角增量.然后在圆锥运动条件下推导出圆锥误差分析表达式,并采用频域泰勒方法进行圆锥误差补偿系数的优化设计.最后定义了圆锥运动环境下的姿态算法性能评价模型,并将新的姿态算法与传统算法通过仿真进行了对比分析.仿真结果表明,新的五子样算法的中低频规范化圆锥精度比传统五子样算法高出1个数量级以上,在圆锥运动环境下,增加子样数和提高采样频率能够显著提高新算法的性能优势.
Abstract:
For increasing the attitude calculation coning correction accuracy of the angular rate-based strapdown inertial navigation system(SINS), a new angular rate-based coning correction structure including angular rate-approximated increments is proposed. Then the coning correction error expression is derived under coning conditions, and the frequency Taylor series method is applied to design the optimized coning correction coefficients. Performance evaluation models are defined to estimate the new attitude algorithm and the traditional algorithm under coning conditions. Numerical simulation results indicate that the normalized coning accuracy of the new five-sample algorithm is 1 order of magnitude higher than that of the traditional algorithm in the low to medium frequency range, and increasing the number of samples and the sampling frequency can improve the performance superiority of the new algorithm under coning conditions.

参考文献/References:

[1] Miller R. A new strapdown attitude algorithm[J]. Journal of Guidance, Control, and Dynamics, 1983, 6(4):287-291.
[2] Ignagni M B. Optimal strapdown attitude integration algorithms[J]. Journal of Guidance, Control, and Dynamics, 1990, 13(2): 363-369.
[3] Savage P G. Coning algorithm design by explicit frequency shaping[J]. Journal of Guidance, Control, and Dynamics, 2010, 33(4): 1123-1132.
[4] Savage P G. Explicit frequency-shaped coning algorithms for pseudoconing environments[J]. Journal of Guidance, Control, and Dynamics, 2011, 34(3): 774-782.
[5] Song Min, Wu Wenqi, Pan Xianfei. Approach to recovering maneuver accuracy in classical coning algorithms[J]. Journal of Guidance, Control, and Dynamics, 2013, 36(6): 1872-1880.
[6] 曾庆化,刘建业,熊智,等.一种角速率激光陀螺惯导系统高精度姿态算法[J].上海交通大学学报,2006,40(12): 2159-2163.
  Zeng Qinghua, Liu Jianye, Xiong Zhi, et al. A high-accuracy attitude algorithm of ring laser gyro strapdown inertial navigation system with pure angle rate output[J]. Journal of Shanghai Jiaotong University, 2006, 40(12): 2159-2163.(in Chinese)
[7] Ben Y Y, Sun F, Gao W, et al. Generalized method for improved coning algorithms using angular rate[J]. IEEE Transactions on Aerospace and Electronic Systems, 2009, 45(4): 1565-1572.
[8] 陈建锋,陈熙源,祝雪芬.硬件增强角速率圆锥优化算法的姿态解算精度分析及改进[J].东南大学学报:自然科学版,2012,42(4):632-636.
  Chen Jianfeng, Chen Xiyuan, Zhu Xuefen. Accuracy analysis of attitude computation and improvement for coning algorithm optimized with hardware-enhanced angular rates[J]. Journal of Southeast University:Natural Science Edition, 2012, 42(4):632-636.(in Chinese)
[9] 汤传业,陈熙源,李建利.一种角速率输入的圆锥算法设计[J].中国惯性技术学报,2013,21(4):456-461.
  Tang Chuanye, Chen Xiyuan, Li Jianli. Coning algorithm design for angular rate inputs[J]. Journal of Chinese Inertial Technology, 2013, 21(4): 456-461.(in Chinese)
[10] 陈建锋,陈熙源,祝雪芬.一种基于二次优化的改进圆锥算法[J].中国惯性技术学报,2012,20(2):131-135.
  Chen Jianfeng, Chen Xiyuan, Zhu Xuefen. An improved coning algorithm based on second optimization [J]. Journal of Chinese Inertial Technology, 2012, 20(2): 131-135.(in Chinese)

备注/Memo

备注/Memo:
收稿日期: 2013-11-05.
作者简介: 汤传业(1982—),男,博士生;陈熙源(联系人),男,博士,教授,博士生导师,chxiyuan@seu.edu.cn.
基金项目: 国家自然科学基金资助项目(51375087)、高等学校博士学科点专项科研基金资助项目(20110092110039)、海洋公益性行业科研专项经费资助项目(201205035-09)、江苏省普通高校研究生科研创新计划资助项目(CXZZ12_0097)、东南大学优秀博士学位论文基金资助项目(YBJJ1349).
引用本文: 汤传业,陈熙源.一种角速率输入的捷联惯导姿态算法[J].东南大学学报:自然科学版,2014,44(3):544-549. [doi:10.3969/j.issn.1001-0505.2014.03.017]
更新日期/Last Update: 2014-05-20