[1]朱立平,秦霞,袁竹林,等.丝状颗粒在滚筒横向截面中的传热传质特性[J].东南大学学报(自然科学版),2014,44(4):756-763.[doi:10.3969/j.issn.1001-0505.2014.04.014]
 Zhu Liping,Qin Xia,Yuan Zhulin,et al.Heat and mass transfer characteristics of filamentous particles in transverse section of rotary dryer[J].Journal of Southeast University (Natural Science Edition),2014,44(4):756-763.[doi:10.3969/j.issn.1001-0505.2014.04.014]
点击复制

丝状颗粒在滚筒横向截面中的传热传质特性()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
44
期数:
2014年第4期
页码:
756-763
栏目:
化学化工
出版日期:
2014-07-16

文章信息/Info

Title:
Heat and mass transfer characteristics of filamentous particles in transverse section of rotary dryer
作者:
朱立平12秦霞3袁竹林1闫亚明2罗登山2李斌2
1东南大学能源热转换及其过程测控教育部重点实验室, 南京 210096; 2中国烟草总公司郑州烟草研究院烟草工艺重点实验室, 郑州 450001; 3扬州大学水利与能源动力工程学院, 扬州225127
Author(s):
Zhu Liping12 Qin Xia3 Yuan Zhulin1 Yan Yaming2 Luo Dengshan2 Li Bin2
1Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, Southeast University, Nanjing 210096, China
2Key Laboratory of Tobacco Processing Technology, Zhengzhou Tobacco Research Institute of CNTC, Zhengzhou 450001, China
3College of Energy and Power Engineering, Yangzhou University, Yangzhou 225127, China
关键词:
丝状颗粒 滚筒干燥器 传热传质 标准偏差
Keywords:
filamentous particle rotary dryer heat and mass transfer standard deviation
分类号:
TQ536
DOI:
10.3969/j.issn.1001-0505.2014.04.014
摘要:
针对丝状物料在滚筒内干燥不均等问题,从干燥机理出发,建立了一种基于离散单元法的丝状颗粒传热传质数学模型.利用该模型对滚筒横向截面中丝状物料的温度和含水率的变化过程进行了分析计算,并通过实验验证了数学模型的有效性.研究结果表明:筒壁温度的变化对丝状颗粒传热传质特性有着直接且重要的影响;在干燥的初始阶段,颗粒彼此间温度的不均匀性迅速增大,但随着干燥的进行,颗粒之间的温度差别又呈现出逐渐缩小的趋势.颗粒间含水率的不均匀性在干燥的初始阶段同样迅速增大,当满足一定的干燥条件或一定的干燥时间,筒体内部丝状颗粒的干燥程度将会越来越均匀;丝状颗粒在滚筒中所获取的热量主要来自于与高温壁面(特别是与筒体之间)的接触导热;与升举式抄板相比,均布式抄板可使颗粒在滚筒横截面上的分布及颗粒间的温度和含水率更加均匀.
Abstract:
On account of drying inequality problem of filamentous materials in the rotary, a mathematical model for heat and mass transfer of filamentous particles based on the discrete element method was proposed according to drying mechanisms, and then it was used to numerically study the temperature and moisture content evolution of filamentous materials in the transverse section of a rotary dryer. The effectivity of this model was verified by experiments. The results show that the change of the temperature of the cylinder wall has a direct and significant impact on the heat and mass transfer characteristics of filamentous particles. At the initial stage of drying, the standard deviation of the particles temperature increases rapidly, but then it reduces gradually with the dying time. And the standard deviation of the moisture content also increases rapidly at the initial stage of drying. When the certain drying conditions or the drying time is met, the uniformity of moisture content of filamentous particles inside the cylinder will be better and better. The heat flux of filamentous particles mainly obtains from the high temperature wall, especially from the cylinder wall. Compared with the lifting type baffle, the uniform type baffle can make the temperature distribution and the moisture content distribution of the particles on the transverse section of the cylinder more uniform.

参考文献/References:

[1] Kamke F A, Wilson J B. Computer simulation of a rotary dryer. Part1: retention time [J]. AIChE Journal, 1986, 32(2):263-268.
[2] Pkez-Correa J R, Cubillos F, Zavala E, et al. Dynamic simulation and control of direct rotary dryers [J].Food Control,1998, 9(4): 195-203.
[3] 黄志刚. 转筒干燥器中颗粒物料流动和传热传质过程的研究[D]. 北京:中国农业大学工学院, 2004.
[4] 常剑, 高金森, 徐春明. 气固两相流中颗粒间碰撞传热进展[J]. 计算机与应用化学, 2007, 24(4): 425-428.
  Chang Jian, Gao Jinsen, Xu Chunming. Advances of impact heat transfer between particles in gas-solid flow[J]. Computers and Applied Chemistry, 2007, 24(4):425-428.(in Chinese)
[5] Chaudhuri B, Muzzio F J, Tomassone M S. Modeling of heat transfer in granular flow in rotating vessels[J]. Chemical Engineering Science, 2006, 61(19): 6348-6360.
[6] Chaudhuri B, Muzzio F J, Tomassone M S. Experimentally validated computations of heat transfer in granular materials in rotary calciners[J]. Powder Technology, 2010, 198(1): 6-15.
[7] Shi D, Vargas W L, Mccarthy J J. Heat transfer in rotary kilns with interstitial gases[J]. Chemical Engineering Science, 2008, 63(18): 4506-4516.
[8] Geng Fan, Li Yiming, Wang Xinyong, et al. Simulation of dynamic processes on flexible filamentous particles in the transverse section of a rotary dryer and its comparison with ideo-imaging experiments [J]. Powder Technology, 2011, 207(1/2/3): 175-182.
[9] Tsuji Y, Kawaguchi T, Tanaka T. Discrete particle simulation of two-dimensional fluidized bed [J]. Powder Technology, 1993, 77(1): 79-87.
[10] Fraige F Y, Langston P A, Chen G Z. Distinct element modelling of cubic particle packing and flow[J]. Powder Technology, 2008, 186(3):224-240.
[11] Hilton J E, Mason L R, Cleary P W. Dynamics of gas-solid fluidised beds with non-spherical particle geometry[J]. Chemical Engineering Science, 2010, 65(5): 1584-1596.
[12] Anthony Wachs. A DEM-DLM/FD method for direct numerical simulation of particulate flows: sedimentation of polygonal isometric particles in a Newtonian fluid with collisions [J]. Computers & Fluids, 2009, 38(8): 1608-1628.
[13] Yagi S, Kunii D. Studies on effective thermal conductivities in packed beds [J]. AIChE Journal, 1957, 3(3): 373-381.
[14] 朱立平,袁竹林,闫亚明,等. 基于离散单元法的丝状颗粒传热数学模型[J].化工学报, 2012, 63(7):2051-2058.
  Zhu Liping, Yuan Zhulin, Yan Yaming, et al. Model of heat transfer in filamentous granular materials based on discrete element method[J]. Journal of Chemical Industry Engineering, 2012, 63(7):2051-2058.(in Chinese)
[15] Wakao N, Kaguei S. Heat and mass transfer in packed beds McGraw-Hill[M]. New York: Gordon and Breach Science Publishers, 1997:135-158.
[16] Guardo A, Coussirat M, Recasens F, et al. CFD studies on particle-to-fluid mass and heat transfer in packed beds free convection effects in supercritical fluids[J]. Chemical Engineering Journal, 2007,62(18/19/20): 5503-5511.
[17] Ranz W E. Friction and transfer coefficients for single particles and packed beds[J]. Chem Eng Prog, 1952,48(4): 247-253.
[18] Incropera F P, de Witt D P, Bergman T L, et al. Fundamental of heat and mass transfer [M]. 6th ed.New York:John Wiley & Sons, 2007:233-324.
[19] 潘永康, 王喜忠. 现代干燥技术 [M]. 2版.北京:化学工业出版社, 2007:12-14.

备注/Memo

备注/Memo:
收稿日期: 2013-12-15.
作者简介: 朱立平(1984—),男,博士生;袁竹林(联系人),男,博士,教授,博士生导师,zlyuan@seu.edu.cn.
基金项目: 郑州烟草研究院烟草工艺重点实验室基金资助项目.
引用本文: 朱立平,秦霞,袁竹林,等.丝状颗粒在滚筒横向截面中的传热传质特性[J].东南大学学报:自然科学版,2014,44(4):756-763. [doi:10.3969/j.issn.1001-0505.2014.04.014]
更新日期/Last Update: 2014-07-20