[1]范圣刚,郑宝锋,刘美景,等.卷边C形截面不锈钢短柱承载力直接强度法[J].东南大学学报(自然科学版),2014,44(6):1246-1253.[doi:10.3969/j.issn.1001-0505.2014.06.027]
 Fan Shenggang,Zheng Baofeng,Liu Meijing,et al.Direct strength method of capacity of stainless steel lipped C section stub columns[J].Journal of Southeast University (Natural Science Edition),2014,44(6):1246-1253.[doi:10.3969/j.issn.1001-0505.2014.06.027]
点击复制

卷边C形截面不锈钢短柱承载力直接强度法()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
44
期数:
2014年第6期
页码:
1246-1253
栏目:
土木工程
出版日期:
2014-11-20

文章信息/Info

Title:
Direct strength method of capacity of stainless steel lipped C section stub columns
作者:
范圣刚12郑宝锋2刘美景3刘芳2陶玥林2
1东南大学混凝土与预应力混凝土教育部重点实验室, 南京 210096; 2东南大学土木工程学院, 南京 210096; 3东南大学成贤学院土木工程系, 南京 210088
Author(s):
Fan Shenggang12 Zheng Baofeng2 Liu Meijing3 Liu Fang2 Tao Yuelin2
1Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, Southeast University, Nanjing 210096, China
2School of Civil Engineering, Southeast University, Nanjing 210096, China
3Department of Civil Engineering, Southeast University Chengxian College, Nanjing 210088, China
关键词:
不锈钢短柱 卷边C形截面 直接强度法 假定模型
Keywords:
stainless steel stub column lipped C section direct strength method hypothetical model
分类号:
TU356
DOI:
10.3969/j.issn.1001-0505.2014.06.027
摘要:
为了研究卷边C形截面不锈钢短柱承载力的计算方法,基于直接强度法,构建了轴心受压和两端受弯矩作用的不锈钢短柱承载力假定模型.结合已开展的38根卷边C形截面不锈钢短柱试验结果,通过参数化有限元分析,对98根轴心受压和94根偏心受压短柱试件进行了数值模拟分析,拟合出适用于卷边C形截面不锈钢短柱承载力的直接强度法计算公式.将拟合公式计算结果与试验结果进行对比分析,结果表明,拟合公式具有较高的精度,可以预测卷边C形截面不锈钢短柱的承载力.
Abstract:
In order to study the calculation method for the capacity of stainless steel lipped C section stub columns, the hypothetical models for the capacity of stainless steel stub columns under axial compression and subjected to bending moments on both ends were built based on the direct strength method. Combined with the test results of 38 stainless steel lipped C section stub columns, the numerical simulation analysis was conducted on 98 axis compression and 94 eccentric compression stub column specimens by finite element parametric analysis. The calculation formulae based on the direct strength method were fitted out, which were then applied to the capacity of stainless steel lipped C section stub columns. The fitting results and the test results were compared and analyzed. The results show that the fitting formulae have high precision and can predict the capacity of stainless steel lipped C section stub columns.

参考文献/References:

[1] Schafer B W. Review: the direct strength method of cold-formed steel member design [J]. Journal of Constructional Steel Research, 2008, 64(7): 766-788.
[2] Leng J, Guest J K, Schafer B W. Shape optimization of cold-formed steel columns [J]. Thin-Walled Structures, 2011, 49(12): 1492-1503.
[3] Lecce M, Rasmussen K J R. Distortional buckling of cold-formed stainless steel sections: experimental investigation [J]. Journal of Structural Engineering, 2006, 132(4): 497-504.
[4] Lecce M, Rasmussen K J R. Distortional buckling of cold-formed stainless steel sections: finite-element modeling and design [J]. Journal of Structural Engineering, 2006, 132(4): 505-514.
[5] Becque J, Lecce M, Rasmussen K J R. The direct strength method for stainless steel compression members [J]. Journal of Constructional Steel Research, 2008, 64(11): 1231-1238.
[6] 刘芳.不锈钢C形截面短柱有效截面计算方法理论与试验研究[D].南京:东南大学土木工程学院,2012.
[7] Fan S, Liu F, Zheng B, et al. Experimental study on bearing capacity of stainless steel lipped C section stub columns [J]. Thin-Walled Structures, 2014, 83: 70-84.
[8] American Iron and Steel Institute. North American specification for the design of cold formed steel structures. Appendix 1: design of cold-formed steel structural members using the direct strength method [S]. Washington DC,USA: American Iron and Steel Institute, 2004.
[9] AS/NZS 4600-2005 Australia/New Zealand standard: cold-formed steel structures [S]. Sydney, Australia: Australia/New Zealand Standards, 2005.
[10] Gardner L. A new approach to stainless steel structural design [D]. London: Imperial College, 2002.
[11] European Committee for Standardization. EN 1993-1-4. Euro code 3: design of steel structures-part 1-4: general rules-supplementary rules for stainless steels [S]. Brussels, Belgium: European Committee for Standardization, 2006.

备注/Memo

备注/Memo:
收稿日期: 2014-07-10.
作者简介: 范圣刚(1974—),男,博士,副教授,101010393@seu.edu.cn.
基金项目: 国家自然科学基金资助项目(51378105)、江苏省产学研前瞻性联合研究资助项目(BY2012200).
引用本文: 范圣刚,郑宝锋,刘美景,等.卷边C形截面不锈钢短柱承载力直接强度法[J].东南大学学报:自然科学版,2014,44(6):1246-1253. [doi:10.3969/j.issn.1001-0505.2014.06.027]
更新日期/Last Update: 2014-11-20