[1]张亮,孙磊,郭永环,等.低银Sn1.0Ag0.5Cu焊点疲劳寿命预测[J].东南大学学报(自然科学版),2015,45(4):668-672.[doi:10.3969/j.issn.1001-0505.2015.04.010]
 Zhang Liang,Sun Lei,Guo Yonghuan,et al.Fatigue life prediction of low-silver Sn1.0Ag0.5Cu solder joints[J].Journal of Southeast University (Natural Science Edition),2015,45(4):668-672.[doi:10.3969/j.issn.1001-0505.2015.04.010]
点击复制

低银Sn1.0Ag0.5Cu焊点疲劳寿命预测()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
45
期数:
2015年第4期
页码:
668-672
栏目:
材料科学与工程
出版日期:
2015-07-20

文章信息/Info

Title:
Fatigue life prediction of low-silver Sn1.0Ag0.5Cu solder joints
作者:
张亮1孙磊1郭永环1姜海波1钟素娟2马佳2鲍丽2
1江苏师范大学机电工程学院, 徐州 221116; 2郑州机械研究所新型钎焊材料与技术国家重点实验室, 郑州 450001
Author(s):
Zhang Liang1 Sun Lei1 Guo Yonghuan1 Jiang Haibo1Zhong Sujuan2 Ma Jia2 Bao Li2
1School of Mechanical and Electrical Engineering, Jiangsu Normal University, Xuzhou 221116, China
2State Key Laboratory of Advanced Brazing Filler Metals & Technology, Zhengzhou Research Institute of Mechanical Engineering, Zhengzhou 450001, China
关键词:
蠕变模型 无铅焊点 翘曲现象 应力-应变 疲劳寿命
Keywords:
creep model lead-free solder joints warp phenomenon stress-strain fatigue life
分类号:
TG454
DOI:
10.3969/j.issn.1001-0505.2015.04.010
摘要:
基于Garofalo-Arrhenius蠕变模型, 采用有限元法模拟WLCSP 5×6器件低银Sn1.0Ag0.5Cu无铅焊点的应力-应变响应,并借助蠕变应变疲劳寿命预测模型计算Sn1.0Ag0.5Cu焊点疲劳寿命.结果表明:在交变的温度循环载荷作用下,整个电子器件出现明显的翘曲现象,中心焊点的应力-应变最小,从中心到拐角焊点应力-应变逐渐增加,拐角焊点应力-应变最大.随着服役时间的增加,焊点内部的蠕变应变显著增加.计算Sn3.0Ag0.5Cu,Sn1.0Ag0.5Cu和Sn37Pb三种焊点的疲劳寿命,发现Sn3.0Ag0.5Cu焊点疲劳寿命明显高于另外2种焊点,Sn1.0Ag0.5Cu和Sn37Pb焊点的疲劳寿命相当.证明了低银Sn1.0Ag0.5Cu无铅钎料可以代替Sn37Pb钎料应用于电子封装,研究结果为低银无铅钎料和焊点可靠性的研究提供了理论支撑.
Abstract:
Based on the Garofalo-Arrhenius creep model, the finite element method is used to analyze the stress-strain response of low-silver Sn1.0Ag0.5Cu solder joints in WLCSP 5×6 device, and the fatigue life of Sn1.0Ag0.5Cu solder joints is calculated by the fatigue life prediction model. The results indicate that the warp of the electronic device can be found under alternating thermal cyclic loading, and the smallest value of stress-strain is in the central solder joints. The stress-strain increases obviously from central solder joints to corner solder joints, and the largest value of stress-strain is in the corner solder joints. With the advance of time in service, the creep strain in the solder joints increases significantly. The fatigue lives of Sn3.0Ag0.5Cu, Sn1.0Ag0.5Cu and Sn37Pb solder joints are calculated. It is found that the fatigue life of Sn3.0Ag0.5Cu is the highest of all, and the fatigue life of Sn1.0Ag0.5Cu is almost equivalent to that of Sn37Pb solder joints. Results demonstrate in theory that the low-silver Sn1.0Ag0.5Cu solder can be utilized to replace the traditional Sn37Pb solder, which can provide theory support for the researches of low Ag lead-free solders and solder joints reliability.

参考文献/References:

[1] Zhang L, Han J G, Guo Y H, et al. Effect of rare earth Ce on the fatigue life of SnAgCu solder joints in WLCSP device using FEM and experiments[J]. Materials Science and Engineering: A, 2014, 597:219-224.
[2] 王俭辛,尹明,赖忠民,等. Sn-Ag-Cu-In无铅钎料润湿性能及显微组织[J]. 焊接学报,2011, 32(11): 69-72.
  Wang Jianxin, Yin Ming, Lai Zhongmin, et al. Wettability and microstructure of Sn-Ag-Cu-In solder[J]. Transactions of the China Welding Institution, 2011, 32(11): 69-72.(in Chinese)
[3] 孙凤莲,胡文刚,王丽凤,等. Bi对Sn-0.3Ag-0.7Cu无铅钎料熔点及润湿性能的影响[J]. 焊接学报,2008,29(10):5-8.
  Sun Fenglian, Hu Wengang, Wang Lifeng, et al. Influence of Bi on the melting point and wettability of Sn-0.3Ag-0.7Cu lead-free solder[J]. Transactions of the China Welding Institution, 2008, 29(10):5-8.(in Chinese)
[4] Zhao X, Saka M, Yamashita M, et al. The effect of adding Ni and Ge microelements on the electromigration resistance of low-Ag based SnAgCu solder[J]. Microsystem Technologies, 2012, 18(12): 2077-2084.
[5] 张亮,Tu K N, 孙磊,等. Sn-0.3Ag-0.7Cu-xSb无铅钎料润湿性[J]. 焊接学报,2015,36(1):59-62.
  Zhang Liang, Tu K N, Sun Lei, et al. Wettability of Sn-0.3Ag-0.7Cu-xSb lead-free solders[J]. Transactions of the China Welding Institution, 2015,36(1):59-62.(in Chinese)
[6] Wang B, Li J J, Gallagher A, et al. Drop impact reliability of Sn-1.0Ag-0.5Cu BGA interconnects with different mounting methods[J]. Microelectronics Reliability, 2012, 52(7):1475-1482.
[7] 李晓延,王志升. 倒装芯片封装结构中SnAgCu焊点热疲劳寿命预测方法研究[J]. 机械强度,2006, 28(6): 893-898.
  Li Xiaoyan, Wang Zhisheng. Thermo-fatigue life prediction methodologies for SnAgCu solder joints in flip-chip assemblies[J]. Journal of Mechanical Strength, 2006, 28(6):893-898.(in Chinese)
[8] 刘芳. 跌落碰撞下SMT无铅焊点可靠性理论与实验研究[D]. 上海:上海交通大学机械系统与振动国家重点实验室,2008.
[9] Pierce D M. Continuum damage mechanics based failure prediction methodology for tin-silver-copper solder alloy interconnects in electronic packaging[D]. Stanford, CA, USA:Stanford University, 2007.
[10] 张亮. SnAgCu系无铅焊点可靠性及相关理论研究[D]. 南京:南京航空航天大学材料科学与技术学院,2011.
[11] 张亮,韩继光,郭永环,等. WLCSP器件结构优化模拟及无铅焊点可靠性[J]. 焊接学报,2012, 33(7): 53-56.
  Zhang Liang, Han Jiguang, Guo Yonghuan, et al. Optimum simulation and soldered joints reliability of WLCSP device[J]. Transactions of the China Welding Institution, 2012, 33(7): 53-56.(in Chinese)
[12] Dudek R, Rzepka S, Dobritz S, et al. Fatigue life prediction and analysis of wafer level packages with SnAgCu solder balls[C]//Electronics System-Integration Technology Conference. Dresden, Germany: 2006, 2: 903-911.
[13] 张亮,韩继光,郭永环,等. WLCSP器件Sn3.9Ag0.6Cu焊点疲劳寿命预测[J]. 焊接学报,2012, 33(3): 95-100.
  Zhang Liang, Han Jiguang, Guo Yonghuan, et al. Fatigue life prediction of Sn3.9Ag0.6Cu soldered joints in WLCSP device [J]. Transactions of the China Welding Institution, 2012, 33(3): 95-100.(in Chinese)
[14] Dudek R, Walter H, Doering R, et al. Thermal fatigue modelling for SnAgCu and SnPb solder joints[C]//5th International Conference on Thermal and Mechanical Simulation and Experiments in Micro-Electronics and Micro-Systems. Brussels, Belgium, 2004: 557-564.
[15] 盛重. QFP焊点可靠性研究及其热循环疲劳寿命预测[D].南京:南京航空航天大学材料科学与技术学院,2010.

备注/Memo

备注/Memo:
收稿日期: 2015-01-07.
作者简介: 张亮(1984—), 男,博士,副教授,zhangliang@jsnu.edu.cn.
基金项目: 国家自然科学基金资助项目(51475220)、江苏省自然科学基金资助项目(BK201244)、新型钎焊材料与技术国家重点实验室开放课题资助项目(SKLABFMT-2015-03)、江苏师范大学高层次后备人才计划资助项目(YQ2015002).
引用本文: 张亮,孙磊,郭永环,等.低银Sn1.0Ag0.5Cu焊点疲劳寿命预测[J].东南大学学报:自然科学版,2015,45(4):668-672. [doi:10.3969/j.issn.1001-0505.2015.04.010]
更新日期/Last Update: 2015-07-20