[1]王楠,舒光冀,杨汉国.部分凝固Sn-15%Pb合金的变温流变性质[J].东南大学学报(自然科学版),1989,19(4):66-73.[doi:10.3969/j.issn.1001-0505.1989.04.010]
 Wang Nan Shu Guangji(Department of Materials Science and Technology)Yang Hanguo(Department of Mathematics and Mechanics).The Rheological Features of Continuously Cooled Partially Solidified Sn-15%Pb Alloy[J].Journal of Southeast University (Natural Science Edition),1989,19(4):66-73.[doi:10.3969/j.issn.1001-0505.1989.04.010]
点击复制

部分凝固Sn-15%Pb合金的变温流变性质()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
19
期数:
1989年第4期
页码:
66-73
栏目:
本刊信息
出版日期:
1989-07-20

文章信息/Info

Title:
The Rheological Features of Continuously Cooled Partially Solidified Sn-15%Pb Alloy
作者:
王楠舒光冀杨汉国
东南大学材料科学与工程系; 东南大学材料科学与工程系; 东南大学数学力学系
Author(s):
Wang Nan Shu Guangji(Department of Materials Science and Technology)Yang Hanguo(Department of Mathematics and Mechanics)
关键词:
流变学 合金 凝固
Keywords:
rheology alloy solidification
分类号:
+
DOI:
10.3969/j.issn.1001-0505.1989.04.010
摘要:
用同轴双筒流变仪研究了在连续冷却的切变流动条件下,部分凝固Sn-15%Pb合金的流变性质。结果表明:在固相分数增加时,这种半固态浆液的流型从牛顿流体向假塑性流体、宾汉流体转化。当固相分数大于0.3以后,随着切变速率的降低,初生固相的形貌由菊花状向网络结构变化。在连续冷却的切变流功中。固相颗粒的聚集是固相生长的重要机制。因此,在连续冷却条件下的部分凝固合金,其表观粘度要高于在等温冷却条件下的情况。
Abstract:
The rheological features of partially solidified Sn-15% Pb in continuously cooled shear flow were investigated using a concentric cylinder viscometer. The results show that with the increase of the fraction of solid, the types of fluids of semi-solid slurries vary from Newtonian, pseudoplastic to Bingham fluids. As the shear rate decreases, the morphology of primary solid changes from rosette to network with solid fraction greater than 0.3. In continuously cooled shear flow, the agglomeration of primary solid particles is the predominant growth mechanism, and it is the reason why the viscosity of partially solidified alloy under continuous cooling condition is higher than that under isothermal cooling.

相似文献/References:

[1]朱蓓蓓,孙扬善,贾迪,等.Mg-Sm系合金的显微组织及力学性能[J].东南大学学报(自然科学版),2009,39(3):610.[doi:10.3969/j.issn.1001-0505.2009.03.036]
 Zhu Beibei,Sun Yangshan,Jia Di,et al.Microstructure and mechanical properties of Mg-Sm alloys[J].Journal of Southeast University (Natural Science Edition),2009,39(4):610.[doi:10.3969/j.issn.1001-0505.2009.03.036]
[2]刘承尧.铸型涂料流变性[J].东南大学学报(自然科学版),1989,19(4):1.[doi:10.3969/j.issn.1001-0505.1989.04.001]
 Liu Chengyao(Department of Mechanical Engineering.Rheological Properties of Mould and Core Coatings[J].Journal of Southeast University (Natural Science Edition),1989,19(4):1.[doi:10.3969/j.issn.1001-0505.1989.04.001]
[3]林鹤云,王念春.电接触合金材料导电率的三维有限元分析[J].东南大学学报(自然科学版),2002,32(4):627.[doi:10.3969/j.issn.1001-0505.2002.04.020]
 Lin Heyun,Wang Nianchun.Three-dimensional finite element analysis for electrical conductivity of electro-contact alloy material[J].Journal of Southeast University (Natural Science Edition),2002,32(4):627.[doi:10.3969/j.issn.1001-0505.2002.04.020]

更新日期/Last Update: 2013-04-30