[1]蒋全,周鹗.开关磁阻电机静特性的有限元分析[J].东南大学学报(自然科学版),1989,19(6):93-99.[doi:10.3969/j.issn.1001-0505.1989.06.013]
 Jiang Quan Zhou E(Department of Electrical Engineering).Finite-Element Analysis of Static Characteristics of Switched Reluctance Motors[J].Journal of Southeast University (Natural Science Edition),1989,19(6):93-99.[doi:10.3969/j.issn.1001-0505.1989.06.013]
点击复制

开关磁阻电机静特性的有限元分析()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
19
期数:
1989年第6期
页码:
93-99
栏目:
本刊信息
出版日期:
1989-11-20

文章信息/Info

Title:
Finite-Element Analysis of Static Characteristics of Switched Reluctance Motors
作者:
蒋全周鹗
东南大学电气工程系; 东南大学电气工程系
Author(s):
Jiang Quan Zhou E(Department of Electrical Engineering)
关键词:
开关磁阻电机 有限元 电磁场
Keywords:
switched reluctance motor finite-element methods electromagnetic field
分类号:
+
DOI:
10.3969/j.issn.1001-0505.1989.06.013
摘要:
本文利用二维有限元法对开关磁阻电机的静特性(即磁链特性、电感特性和矩角特性)以及相与相之间的互感进行了详细的计算和分析。在分析中考虑了端部效应的影响,测量了一台试验样机的电感曲线,所得结果与计算结果很吻合,这表明应用有限元法对开关磁阻电机进行分析是足够准确、有效的。
Abstract:
In this paper, the static characteristics of switched reluctance motors (SRM) are analysed in detail. The flux-linkages, inductances and torques as well as mutual inductances with different currents and rotor positions are calculated by using two-dimensional finite-element analysis(FEA). For getting more accurate results, the effects of the fringe flux of ends are considered. A prototype SRM has been made. The comparison between the experimental results and computed results of the prototype motor shows that FEA is sufficiently accurate to analyse the static charateristics of SRM.

相似文献/References:

[1]王永泉,郭正兴,罗斌,等.复杂铸钢节点受力性能试验研究[J].东南大学学报(自然科学版),2009,39(1):47.[doi:10.3969/j.issn.1001-0505.2009.01.009]
 Wang Yongquan,Guo Zhengxing,Luo Bin,et al.Experimental study on mechanical performance of complex cast steel joint[J].Journal of Southeast University (Natural Science Edition),2009,39(6):47.[doi:10.3969/j.issn.1001-0505.2009.01.009]
[2]卢熹,杨瑛.下颌骨-牙种植体有限元建模与瞬态分析[J].东南大学学报(自然科学版),2010,40(4):722.[doi:10.3969/j.issn.1001-0505.2010.04.011]
 Lu Xi,Yang Ying.Stress wave efforts of implant-bone under impact loading[J].Journal of Southeast University (Natural Science Edition),2010,40(6):722.[doi:10.3969/j.issn.1001-0505.2010.04.011]
[3]陈一锴,何杰,彭佳,等.基于动载荷模拟的半刚性沥青路面响应分析[J].东南大学学报(自然科学版),2010,40(3):593.[doi:10.3969/j.issn.1001-0505.2010.03.030]
 Chen Yikai,He Jie,Peng Jia,et al.Dynamic analysis of semi-rigid asphalt pavement subjected to simulant dynamic loads[J].Journal of Southeast University (Natural Science Edition),2010,40(6):593.[doi:10.3969/j.issn.1001-0505.2010.03.030]
[4]李桃,林鹤云,黄允凯,等.基于三维运动涡流场分析的永磁涡流联轴器特性[J].东南大学学报(自然科学版),2010,40(2):301.[doi:10.3969/j.issn.1001-0505.2010.02.016]
 Li Tao,Lin Heyun,Huang Yunkai,et al.Characteristics study of permanent magnet eddy current coupling based on 3D moving eddy current field analysis[J].Journal of Southeast University (Natural Science Edition),2010,40(6):301.[doi:10.3969/j.issn.1001-0505.2010.02.016]
[5]陈勇,张耀春.设置斜肋方形薄壁钢管混凝土轴压短柱研究[J].东南大学学报(自然科学版),2006,36(1):107.[doi:10.3969/j.issn.1001-0505.2006.01.022]
 Chen Yong,Zhang Yaochun.Research on square stub columns with oblique ribs of concrete-filled thin-walled steel tube under axial compression loading[J].Journal of Southeast University (Natural Science Edition),2006,36(6):107.[doi:10.3969/j.issn.1001-0505.2006.01.022]
[6]裴荣,周百令,李宏生,等.基于谐振原理的高精度石英加速度计设计技术[J].东南大学学报(自然科学版),2006,36(5):732.[doi:10.3969/j.issn.1001-0505.2006.05.010]
 Pei Rong,Zhou Bailing,Li Hongsheng,et al.Technology of high precision quartz accelerometer design based on resonant principle[J].Journal of Southeast University (Natural Science Edition),2006,36(6):732.[doi:10.3969/j.issn.1001-0505.2006.05.010]
[7]倪晓宇,易红,倪中华,等.机床组件有限元分析前处理专家系统研究[J].东南大学学报(自然科学版),2005,35(2):211.[doi:10.3969/j.issn.1001-0505.2005.02.011]
 Ni Xiaoyu,Yi Hong,Ni Zhonghua,et al.Research on the expert system for FEA of machine tool’s components[J].Journal of Southeast University (Natural Science Edition),2005,35(6):211.[doi:10.3969/j.issn.1001-0505.2005.02.011]
[8]朱晓文,赵启林,朱凯,等.润扬大桥北锚碇基础三维数值仿真分析[J].东南大学学报(自然科学版),2005,35(2):293.[doi:10.3969/j.issn.1001-0505.2005.02.029]
 Zhu Xiaowen,Zhao Qilin,Zhu Kai,et al.3-D simulation analysis of Runyang suspended bridge’s north anchorage[J].Journal of Southeast University (Natural Science Edition),2005,35(6):293.[doi:10.3969/j.issn.1001-0505.2005.02.029]
[9]周德廉,陈新,孙庆鸿.高精度内圆磨床整机动力学建模及优化设计[J].东南大学学报(自然科学版),2001,31(2):35.[doi:10.3969/j.issn.1001-0505.2001.02.009]
 Zhou Delian,Chen Xin,Sun Qinghong.Dynamic Modeling and Optimal Design for High Precise Internal Grinder[J].Journal of Southeast University (Natural Science Edition),2001,31(6):35.[doi:10.3969/j.issn.1001-0505.2001.02.009]
[10]刘闯,朱学忠,刘迪吉.开关磁阻电机的非线性电感参数法仿真分析[J].东南大学学报(自然科学版),2001,31(4):106.[doi:10.3969/j.issn.1001-0505.2001.04.025]
 Liu Chuang,Zhu Xuezhong,Liu Diji.Simulation Analysis of Non-Linear Inductance Parameters Method for SRM[J].Journal of Southeast University (Natural Science Edition),2001,31(6):106.[doi:10.3969/j.issn.1001-0505.2001.04.025]

更新日期/Last Update: 2013-04-30