[1]张忠铧,孙扬善.Fe3Al 基合金力学性能和显微组织的关系研究[J].东南大学学报(自然科学版),1997,27(5):24-28.[doi:10.3969/j.issn.1001-0505.1997.05.005]
 Zhang Zhonghua,Sun Yangshan.Relationship between Microstructure and Mechanical Properties of Fe 3Al Based Alloy[J].Journal of Southeast University (Natural Science Edition),1997,27(5):24-28.[doi:10.3969/j.issn.1001-0505.1997.05.005]
点击复制

Fe3Al 基合金力学性能和显微组织的关系研究()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
27
期数:
1997年第5期
页码:
24-28
栏目:
材料科学与工程
出版日期:
1997-09-20

文章信息/Info

Title:
Relationship between Microstructure and Mechanical Properties of Fe 3Al Based Alloy
作者:
张忠铧孙扬善
东南大学材料科学与工程系
Author(s):
Zhang Zhonghua Sun Yangshan
Department of Materials Science and Engineering, Southeast University, Nanjing 210018
关键词:
Fe3Al 力学性能 显微组织
分类号:
TG113.25
DOI:
10.3969/j.issn.1001-0505.1997.05.005
摘要:
显微组织对Fe3Al基合金的室温和高温力学性能以及抗蠕变性能有较大影响.研究表明,减少横向晶界并不是提高Fe3Al合金室温塑性的最有效途径.通过加大形变量,细化显微组织可以明显改善合金的室温力学性能,但会使其高温性能下降..

相似文献/References:

[1]江心怡,薛烽,赵阔.Mg-Al-RE系镁合金组织与性能[J].东南大学学报(自然科学版),2010,40(3):646.[doi:10.3969/j.issn.1001-0505.2010.03.040]
 Jiang Xinyi,Xue Feng,Zhao Kuo.Microstructures and mechanical properties of Mg-Al-RE alloys[J].Journal of Southeast University (Natural Science Edition),2010,40(5):646.[doi:10.3969/j.issn.1001-0505.2010.03.040]
[2]程洁,周啸,李俐军,等.冠脉支架的多功能体外力学性能测试装置及实验研究[J].东南大学学报(自然科学版),2010,40(2):341.[doi:10.3969/j.issn.1001-0505.2010.02.024]
 Cheng Jie,Zhou Xiao,Li Lijun,et al.In-vitro test apparatus and experimental study of mechanics properties of coronary stents[J].Journal of Southeast University (Natural Science Edition),2010,40(5):341.[doi:10.3969/j.issn.1001-0505.2010.02.024]
[3]吴晓婧,薛烽,周健,等.Cu,Ni对Sn-Zn-Al无铅焊料组织和性能的影响[J].东南大学学报(自然科学版),2009,39(3):623.[doi:10.3969/j.issn.1001-0505.2009.03.038]
 Wu Xiaojing,Xue Feng,Zhou Jian,et al.Effect of Cu and Ni on microstructure and properties of Sn-Zn-Al lead-free solders[J].Journal of Southeast University (Natural Science Edition),2009,39(5):623.[doi:10.3969/j.issn.1001-0505.2009.03.038]
[4]周健,王常亮,薛烽.Sn-Zn钎料Cu接头的界面反应及力学性能[J].东南大学学报(自然科学版),2009,39(3):615.[doi:10.3969/j.issn.1001-0505.2009.03.037]
 Zhou Jian,Wang Changliang,Xue Feng.Interfacial reaction and joint strength of Sn-Zn solder/Cu[J].Journal of Southeast University (Natural Science Edition),2009,39(5):615.[doi:10.3969/j.issn.1001-0505.2009.03.037]
[5]张秀芝,孙伟,张倩倩,等.混杂钢纤维增强超高性能水泥基材料力学性能分析[J].东南大学学报(自然科学版),2008,38(1):156.[doi:10.3969/j.issn.1001-0505.2008.01.030]
 Zhang Xiuzhi,Sun Wei,Zhang Qianqian,et al.Mechanical behaviors of hybrid steel fiber reinforced ultra-high performance cementitious composites[J].Journal of Southeast University (Natural Science Edition),2008,38(5):156.[doi:10.3969/j.issn.1001-0505.2008.01.030]
[6]付小琴,周健,孙扬善,等.Sn-8Zn-3Bi-P无铅钎料微观组织及性能[J].东南大学学报(自然科学版),2006,36(5):831.[doi:10.3969/j.issn.1001-0505.2006.05.030]
 Fu Xiaoqin,Zhou Jian,Sun Yangshan,et al.Effect of phosphorus on microstructure and properties of Sn-8Zn-3Bi lead-free solder[J].Journal of Southeast University (Natural Science Edition),2006,36(5):831.[doi:10.3969/j.issn.1001-0505.2006.05.030]
[7]左晓宝,等.一种超弹性SMA复合阻尼器的设计与试验[J].东南大学学报(自然科学版),2004,34(4):459.[doi:10.3969/j.issn.1001-0505.2004.04.009]
 Zuo Xiaobao,Li Aiqun,et al.Design and experimental investigation of superelastic SMA damper[J].Journal of Southeast University (Natural Science Edition),2004,34(5):459.[doi:10.3969/j.issn.1001-0505.2004.04.009]
[8]魏宇,孙扬善,樊泉,等.TiC强化Cr12MoV基复合材料的组织和性能分析[J].东南大学学报(自然科学版),2003,33(4):463.[doi:10.3969/j.issn.1001-0505.2003.04.020]
 Wei Yu,Sun Yangshan,Fan Quan,et al.Microstructure and mechanical properties of TiC reinforced Cr12MoV composite[J].Journal of Southeast University (Natural Science Edition),2003,33(5):463.[doi:10.3969/j.issn.1001-0505.2003.04.020]
[9]闵学刚,孙扬善,杜温文,等.Ca,Si和RE对AZ91合金的组织和性能的影响[J].东南大学学报(自然科学版),2002,32(3):409.[doi:10.3969/j.issn.1001-0505.2002.03.022]
 Min Xuegang,Sun Yangshan,Du Wenwen,et al.Effects of Ca,Si and RE additions on the microstructures and mechanical properties of AZ91 based alloys[J].Journal of Southeast University (Natural Science Edition),2002,32(5):409.[doi:10.3969/j.issn.1001-0505.2002.03.022]
[10]杨春,蔡健,张学文,等.劲性钢管混凝土组合柱轴压性能试验研究[J].东南大学学报(自然科学版),2002,32(5):715.[doi:10.3969/j.issn.1001-0505.2002.05.008]
 Yang Chun,Cai Jian,Zhang Xuewen,et al.Experimental research on the composite column with cone of concrete filled steel tube under axial loads[J].Journal of Southeast University (Natural Science Edition),2002,32(5):715.[doi:10.3969/j.issn.1001-0505.2002.05.008]
[11]薛烽,孙扬善,郭军.W 对 Fe3Al 基合金高温力学性能的改善[J].东南大学学报(自然科学版),1998,28(1):91.[doi:10.3969/j.issn.1001-0505.1998.01.017]
 Xue Feng,Sun Yangshan,Guo Jun.Improved High Temperature Mechanical Properties of Fe 3Al Based Alloys with W Addition[J].Journal of Southeast University (Natural Science Edition),1998,28(5):91.[doi:10.3969/j.issn.1001-0505.1998.01.017]

备注/Memo

备注/Memo:
南京大学固体微结构国家重点实验室资助
更新日期/Last Update: 2013-04-14