[1]夏敦柱,王寿荣,周百令.硅微陀螺仪零偏温度性能补控方法设计[J].东南大学学报(自然科学版),2012,42(2):290-294.[doi:10.3969/j.issn.1001-0505.2012.02.019]
 Xia Dunzhu,Wang Shourong,Zhou Bailing.ZRO temperature dependency compensating-control design of micro-gyro[J].Journal of Southeast University (Natural Science Edition),2012,42(2):290-294.[doi:10.3969/j.issn.1001-0505.2012.02.019]
点击复制

硅微陀螺仪零偏温度性能补控方法设计()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
42
期数:
2012年第2期
页码:
290-294
栏目:
自动化
出版日期:
2012-03-20

文章信息/Info

Title:
ZRO temperature dependency compensating-control design of micro-gyro
作者:
夏敦柱 王寿荣 周百令
东南大学微惯性仪表与先进导航技术教育部重点实验室, 南京 210096
Author(s):
Xia Dunzhu Wang Shourong Zhou Bailing
Key Laboratory for Micro-Inertial Instrument and Advanced Navigation Technology of Ministry of Education, Southeast University, Nanjing 210096,China
关键词:
硅微陀螺仪 零偏输出 温度补偿 温度控制
Keywords:
silicon micro-gyro ZRO(zero rate output) temperature compensation temperature control
分类号:
TP212.12
DOI:
10.3969/j.issn.1001-0505.2012.02.019
摘要:
首先从理论上推导了硅微陀螺仪谐振频率、品质因数、敏感信号输出及机械热噪声与温度之间的关系,进而说明了温度对陀螺仪零偏输出影响是各非线性因素综合作用的结果.然后,通过部分温度特性试验获得了硅微陀螺仪的模态谐振频率和品质因数随温度变化关系曲线.最后,根据实测零偏试验数据给出了分段多项式温度补偿方法,并进一步结合恒温控制方法改善补偿一致性效果,从而保证硅微陀螺仪硅结构体及其驱动检测电路不受外界温度变化的影响.结果表明,温补和温控技术相结合对提高陀螺仪的零偏稳定性有显著效果.
Abstract:
First, the relations between temperature and the resonant frequency, quality factor, sensing signal output, and mechanical thermal noise of silicon micro-gyro are theoretically deduced to further demonstrate that the effect on ZRO(zero rate output)of micro-gyro is a combined result of these nonlinear factors. Then, through partial temperature dependency test, the relationship curves of the resonant frequency and quality factor over temperature in two modes are derived. Finally, according to the real ZRO measurements, the polynominal term fitting method is presented and then the hybrid method combined with constant temperature control is intensively investigated to better the conforming compensation effect, which can make sure that the wafer die and circuitry are immune to the ambient temperature. The experimental results demonstrate that the temperature compensation and control system designed can effectively improve the zero bias stability of the micro-gyro.

参考文献/References:

[1] Kulygin A,Schmid U,Seidel H.Characterization of a novel micromachined gyroscope under varying ambient pressure conditions[J].Sens Actuat A,2008,145(1):52-58.
[2] Li Z,Yang Z,Xiao Z.A bulk micromachined vibratory lateral gyroscope fabricated with wafer bonding and deep trench etching[J].Sens Actuat A,2000,83(1/2/3):24-29.
[3] Ashwin A S.Integrated micromechanical resonant sensor for inertial measurement system[D].Berkeley,USA:School of Electrical Engineering and Computer Science,University of California,2002.
[4] Wyatt O D.Mechanical analysis and design of vibratory micromachined gyroscopes[D].Berkeley,USA:School of Mechanical Engineering,University of California,2001.
[5] Jason K P H.Modeling and identification of the jet propulsion laboratory vibratory rate microgyroscope[D].Los Angeles,LA,USA:School of Mechanical Engineering,University of California,2002.
[6] 房建成,李建利,盛蔚.改进的内框架驱动式硅MEMS陀螺温度误差模型[J].北京航空航天大学学报,2006,32(11):1277-1280.
  Fang Jiancheng,Li Jianli,Sheng Wei.Improved temperature error model of silicon MEMS gyroscope with inside frame driving[J].J Beijing Univ Aeronaut Astronaut,2006,32(11):1277-1280.(in Chinese)
[7] Shcheglov K,Evans C,Gutierrez R.Temperature dependent characteristics of the JPL silicon MEMS gyroscope[C] //Proceedings of the IEEE Aerospace Conference.Big Sky,MT,USA,2000:403-411.
[8] Xia Dunzhu,Cheng Shuling,Wang Shourong.Temperature compensation method of silicon microgyroscope based on BP neural network[J].Journal of Southeast University:English Edition,2010,26(1):58-61.

相似文献/References:

[1]杨波,周百令.真空封装的硅微陀螺仪[J].东南大学学报(自然科学版),2006,36(5):736.[doi:10.3969/j.issn.1001-0505.2006.05.011]
 Yang Bo,Zhou Bailing.Vacuum packaged silicon micromachined gyroscope[J].Journal of Southeast University (Natural Science Edition),2006,36(2):736.[doi:10.3969/j.issn.1001-0505.2006.05.011]
[2]王晓雷,张印强,杨成,等.基于数字锁相环控制的硅微陀螺仪驱动模态分析与实验[J].东南大学学报(自然科学版),2013,43(4):747.[doi:10.3969/j.issn.1001-0505.2013.04.014]
 Wang Xiaolei,Zhang Yinqiang,Yang Cheng,et al.Analysis and experiment of drive mode of silicon micro-gyroscope based on digital phased-locked loop control[J].Journal of Southeast University (Natural Science Edition),2013,43(2):747.[doi:10.3969/j.issn.1001-0505.2013.04.014]
[3]杨成,李宏生,陈建元,等.基于傅里叶解调算法的硅微陀螺仪控制系统设计与试验[J].东南大学学报(自然科学版),2014,44(3):550.[doi:10.3969/j.issn.1001-0505.2014.03.018]
 Yang Cheng,Li Hongsheng,Chen Jianyuan,et al.Design and test of silicon micromachined gyroscope control system based on Fourier demodulation algorithm[J].Journal of Southeast University (Natural Science Edition),2014,44(2):550.[doi:10.3969/j.issn.1001-0505.2014.03.018]

备注/Memo

备注/Memo:
作者简介: 夏敦柱(1978—),男,博士,副教授, xiadz_1999@163.com.
基金项目: 国家高技术研究发展计划(863计划)资助项目(2002AA812038)、国家自然科学基金资助项目(61001048,60974116).
引文格式: 夏敦柱,王寿荣,周百令.硅微陀螺仪零偏温度性能补控方法设计[J].东南大学学报:自然科学版,2012,42(2):290-294. [doi:10.3969/j.issn.1001-0505.2012.02.019]
更新日期/Last Update: 2012-03-20