[1]陈卓异,黄侨,杨明.波形钢腹板预弯工形梁的试验研究[J].东南大学学报(自然科学版),2013,43(5):973-978.[doi:10.3969/j.issn.1001-0505.2013.05.013]
 Chen Zhuoyi,Huang Qiao,Yang Ming.Experimental research on preflex I-beam with corrugated steel web[J].Journal of Southeast University (Natural Science Edition),2013,43(5):973-978.[doi:10.3969/j.issn.1001-0505.2013.05.013]
点击复制

波形钢腹板预弯工形梁的试验研究()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
43
期数:
2013年第5期
页码:
973-978
栏目:
土木工程
出版日期:
2013-09-20

文章信息/Info

Title:
Experimental research on preflex I-beam with corrugated steel web
作者:
陈卓异黄侨杨明
东南大学交通学院, 南京210096
Author(s):
Chen Zhuoyi Huang Qiao Yang Ming
School of Transportation, Southeast University, Nanjing 210096, China
关键词:
预弯梁 波形钢腹板 模型试验 承载力分析 剪切变形
Keywords:
preflex beam corrugated steel web model test capacity analysis shear deformation
分类号:
TU398.9
DOI:
10.3969/j.issn.1001-0505.2013.05.013
摘要:
对新型结构波形钢腹板预弯工形梁的制作工艺和承载性能开展了探索性研究.通过制作缩尺试验梁,着重分析了波形钢腹板钢梁在预弯力作用下的挠度和反弹后一期混凝土的压应力,并采用静载试验测试了对称集中荷载作用下的梁体变形、开裂弯矩、破坏形态和极限承载力等.试验结果表明,在预弯力作用下波形钢腹板具有良好的稳定性.释放预弯力后波形钢腹板钢梁能够有效地将预应力施加在一期混凝土上,跨中下缘混凝土的压应力为12.9 MPa.试验梁具有良好的抗弯刚度、延性和抗裂性能,其开裂荷载约为极限承载力的47%.理论与实测结果表明,波形钢腹板预弯工形梁的竖向剪切挠度占总挠度的22.4%,在计算挠度时需考虑剪切变形的影响.
Abstract:
A scaled model beam was fabricated to explore the construction technology and load-carrying capacity of a new structure, preflex I-beam with corrugated steel web. The deformation of the preflex steel beam under preflex loads and the stress of the first-stage concrete after rebounding were emphatically analyzed. The structural deformation, cracking moment, damaged shape and ultimate bearing capacity of the model beam under symmetrically concentrated forces were tested. The experimental results show that the corrugated steel web is steady under preflex loads. The prestress can effectively be applied to the first-stage concrete by preflex steel beam after rebounding, and the compressive stress of concrete at the lower edge of the beam is 12.9 MPa. The test beam possesses good ductility, flexural stiffness and crack resistance. The cracking load of the test beam is about 47% of its ultimate load capacity. Analytical and experimental results indicate that the shearing deflection of the preflex I-beam with corrugated steel web in mid-span is 22.4% against the total deflection, which needs to be considered in calculation.

参考文献/References:

[1] 黄侨. 桥梁钢-混凝土组合结构设计原理[M]. 北京: 人民交通出版社, 2004: 77-83.
[2] Staquet S, Rigot G, Detandt H, et al. Innovative composite precast prestressed precambered U-shaped concrete deck for belgiums high speed railway trains[J]. PCI Journal, 2004, 49(6):94-113,134.
[3] 吴文清, 万水, 叶见曙, 等. 波形钢腹板组合箱梁剪力滞效应的空间有限元分析[J]. 土木工程学报, 2004, 37(9):31-36.
  Wu Wenqing, Wan Shui, Ye Jianshu,et al. 3-D finite element analysis on shear lag effect in composite box girder with corrugated steel web[J].China Civil Engineering Journal, 2004, 37(9):31-36.(in Chinese)
[4] 聂建国, 唐亮. 基于弹性扭转约束边界的波形钢板整体剪切屈曲分析[J]. 工程力学, 2008, 25(3):1-7.
  Nie Jianguo, Tang Liang. Global shear buckling of corrugated steel plates with edges elastically restrained against rotation[J].Engineering Mechanics, 2008, 25(3):1-7.(in Chinese)
[5] Driver R, Abbas H,Sause R. Shear behavior of corrugated web bridge girders[J].Journal of Structural Engineering, 2006, 132(2):195-203.
[6] 周绪红, 孔祥福, 侯健, 等. 波形钢腹板组合箱梁的抗剪受力性能[J]. 中国公路学报, 2007, 20(2):77-82.
  Zhou Xuhong, Kong Xiangfu, Hou Jian, el al. Shear mechanical property of composite box girder with corrugated steel webs[J].China Journal of Highway and Transport, 2007, 20(2):77-82.(in Chinese)
[7] Abbas H, Sause R, Driver R. Behavior of corrugated web I-girders under in-plane loads[J]. Journal of Engineering Mechanics, 2006, 132(8):806-814.
[8] 黄侨, 吴红林, 陈雪枫. 预弯组合梁桥的全时程时效分析理论及其应用[J]. 哈尔滨工业大学学报, 2003, 35(5):615-620.
  Huang Qiao, Wu Honglin, Chen Xuefeng. Preflexed beam bridges long-term properties analysis theory and its application [J].Journal of Harbin Institute of Technology, 2003, 35(5):615-620.(in Chinese)
[9] Lebeau K, Wadia-Fascetti S. Predictive and diagnostic load rating model of a prestressed concrete bridge [J].Journal of Bridge Engineering, 2010, 15(4):399-407.
[10] Ikarashi K, Kozaka K, Nakamura Y. Plastic deformation capacity of corrugated web girder under shear bending[J]. Journal of Structural and Construction Engineering, 2012, 77(673):443-451.
[11] 贺君, 刘玉擎, 陈艾荣, 等. 折腹式组合梁桥考虑剪切变形的挠度计算[J]. 同济大学学报:自然科学版, 2009, 37(4): 440-444.
  He Jun, Liu Yuqing, Chen Airong, el al. Deflection calculation of composite girder bridge with corrugated web with consideration of shear deformation[J]. Journal of Tongji University: Natural Science, 2009, 37(4): 440-444.(in Chinese)
[12] Chen Zhuoyi, Huang Qiao, Yang Ming, et al. Shear stress distribution and deflection of preflex I-girder with corrugated steel web [C]//Proceedings of the 3rd International Conference on Civil Engineering, Architecture and Building Materials. Jinan, China, 2013:1374-1379.

相似文献/References:

[1]马磊,万水,蒋正文,等.单箱多室波形钢腹板箱梁荷载横向分布[J].东南大学学报(自然科学版),2014,44(1):145.[doi:10.3969/j.issn.1001-0505.2014.01.026]
 Ma Lei,Wan Shui,Jiang Zhengwen,et al.Load transverse distribution of single box multi-cell girder with corrugated steel webs[J].Journal of Southeast University (Natural Science Edition),2014,44(5):145.[doi:10.3969/j.issn.1001-0505.2014.01.026]
[2]张鸿,邓文琴,张建东,等.节段预制波形钢腹板组合梁弯曲性能试验研究[J].东南大学学报(自然科学版),2017,47(6):1180.[doi:10.3969/j.issn.1001-0505.2017.06.016]
 Zhang Hong,Deng Wenqin,Zhang Jiandong,et al.Experimental study on flexural behavior of segmental precast composite girder with corrugated steel webs[J].Journal of Southeast University (Natural Science Edition),2017,47(5):1180.[doi:10.3969/j.issn.1001-0505.2017.06.016]

备注/Memo

备注/Memo:
作者简介: 陈卓异(1985—),男,博士生;黄侨(联系人),男,博士,教授,博士生导师, qhuanghit@126.com.
基金项目: 国家自然科学基金资助项目(51078078)、中央高校基本科研业务费专项资金资助项目(CXZZ12_0110).
引文格式: 陈卓异,黄侨,杨明.波形钢腹板预弯工形梁的试验研究[J].东南大学学报:自然科学版,2013,43(5):973-978. [doi:10.3969/j.issn.1001-0505.2013.05.013]
更新日期/Last Update: 2013-09-20