[1]杨成,李宏生,陈建元,等.基于傅里叶解调算法的硅微陀螺仪控制系统设计与试验[J].东南大学学报(自然科学版),2014,44(3):550-555.[doi:10.3969/j.issn.1001-0505.2014.03.018]
 Yang Cheng,Li Hongsheng,Chen Jianyuan,et al.Design and test of silicon micromachined gyroscope control system based on Fourier demodulation algorithm[J].Journal of Southeast University (Natural Science Edition),2014,44(3):550-555.[doi:10.3969/j.issn.1001-0505.2014.03.018]
点击复制

基于傅里叶解调算法的硅微陀螺仪控制系统设计与试验()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
44
期数:
2014年第3期
页码:
550-555
栏目:
其他
出版日期:
2014-05-16

文章信息/Info

Title:
Design and test of silicon micromachined gyroscope control system based on Fourier demodulation algorithm
作者:
杨成李宏生陈建元王晓雷
东南大学仪器科学与工程学院, 南京 210096; 东南大学微惯性仪表与先进导航技术教育部重点实验室, 南京 210096
Author(s):
Yang Cheng Li Hongsheng Chen Jianyuan Wang Xiaolei
School of Instrument Science and Engineering, Southeast University, Nanjing 210096, China
Key Laboratory of Micro-Inertial Instrument and Advanced Navigation Technology of Ministry of Education, Southeast University, Nanjing 210096, China
关键词:
硅微陀螺仪 傅里叶解调算法 同步倍频采样 自动增益控制 锁相环 现场可编程门阵列
Keywords:
silicon micromachined gyroscope Fourier demodulation algorithm synchronous frequency multiplication sampling automatic gain control phase-locked loop field programmable gate-array(FPGA)
分类号:
V241.6
DOI:
10.3969/j.issn.1001-0505.2014.03.018
摘要:
为了改善硅微陀螺仪控制精度,采用基于现场可编程门阵列(FPGA)实现的傅里叶解调算法,结合同步倍频采样技术,分别对硅微陀螺仪驱动轴检测信号和敏感轴检测信号进行解调.并借助自动增益控制(AGC)和锁相环(PLL)技术,实现硅微陀螺仪的闭环驱动控制和高精度解调输出.仿真和试验结果表明:相比于乘法解调,傅里叶解调算法具有更好的解调精度和更强的抗噪声能力;驱动振幅控制精度达到7.5×10-6,全温频率跟踪最大误差为50 mHz;试验陀螺的零偏稳定性由采用乘法解调算法的24.83(°)/h提高到采用傅里叶解调算法的10.65(°)/h.试验验证了傅里叶解调算法在硅微陀螺仪数字控制系统中的可行性和有效性.
Abstract:
To further improve the control precision of a silicon micromachined gyroscope, the Fourier demodulation algorithm based on field programmable gate-array(FPGA)and the synchronous frequency multiplication sampling are adopted to demodulate the drive detection signal and the sensitive axis signal. With the automatic gain control(AGC)technology and the phase-locked loop(PLL)technology, the closed-loop drive control and the high precision demodulated output of the silicon micromachined gyroscope are realized. Simulation and experimental results indicate that the Fourier demodulation algorithm has better accuracy and greater noise immunity than the multiplication demodulation. The control accuracy of the drive detection voltage is up to 7.5×10-6, and the maximum frequency tracking error over temperature is 50 mHz. The bias stability of the silicon micromachined gyroscope is improved from 24.83(°)/h by the multiplication demodulation algorithm to 10.65(°)/h by the Fourier demodulation algorithm. Experiments verify that the design of digital control system based on Fourier demodulation is feasible and effective.

参考文献/References:

[1] Shaeffer D K. MEMS inertial sensors: a tutorial overview [J]. IEEE Communications Magazine, 2013, 51(4): 100-109.
[2] Keymeulen D, Peay C, Foor D, et al. Control of MEMS disc resonance gyroscope(DRG)using a FPGA platform [C]//2008 IEEE Aerospace Conference. Big Sky, MT, USA, 2008: 1-8.
[3] Neul R, Gomez U, Kehr K, et al. Micromachined gyros for automotive applications [C]//Proceedings of the Fourth IEEE Conference on Sensors. Irvine,CA, USA, 2005: 527-530.
[4] Liu D C, Lu N N, Cui J, et al. Digital closed-loop control based on adaptive filter for drive mode of a MEMS gyroscope [C]//IEEE Sensors Conference. Waikoloa, HI, USA, 2010: 1722-1726.
[5] Xia G M, Yang B, Wang S R. New digital drive phase control for improving bias stability of silicon MEMS gyroscope [J]. Journal of Southeast University: English Edition, 2011, 27(1): 67-70.
[6] 王寿荣,黄丽斌,杨波.微惯性仪表与微系统[M].北京:兵器工业出版社,2011: 45-49.
[7] 杨雪萍,丁书文.一种基于富氏算法的交流采样精确算法[J].华北电力技术,2000(6):16-18.
  Yang Xueping, Ding Shuwen. A accurate algorithm based on Fourier algorithm[J]. North China Electric Power, 2000(6): 16-18.(in Chinese)
[8] 黄纯,何怡刚,姜亚群,等.交流采样同步方法的分析与改进[J].中国电机工程学报,2002,22(9):38-42.
  Huang Chun, He Yigang, Jiang Yaqun, et al. Analysis and improvement of synchronization technique for AC sampling [J]. Proceedings of the CSEE, 2002, 22(9): 38-42.(in Chinese)
[9] Sung W T, Sung S K, Lee J G, et al. Design and performance test of a MEMS vibratory gyroscope with a novel AGC force rebalance control [J]. Journal of Micromechanics and Microengineering, 2007, 7(10): 1939-1948.
[10] 邹学锋,卢新艳.基于Allan方差的MEMS陀螺仪性能评价方法[J].微纳电子技术,2010,47(8):490-493.
  Zou Xuefeng, Lu Xinyan. Estimate method of MEMS gyroscope performance based on Allan variance [J]. Micronano-Electronic Technology, 2010, 47(8): 490-493.(in Chinese)

相似文献/References:

[1]夏敦柱,王寿荣,周百令.硅微陀螺仪零偏温度性能补控方法设计[J].东南大学学报(自然科学版),2012,42(2):290.[doi:10.3969/j.issn.1001-0505.2012.02.019]
 Xia Dunzhu,Wang Shourong,Zhou Bailing.ZRO temperature dependency compensating-control design of micro-gyro[J].Journal of Southeast University (Natural Science Edition),2012,42(3):290.[doi:10.3969/j.issn.1001-0505.2012.02.019]
[2]杨波,周百令.真空封装的硅微陀螺仪[J].东南大学学报(自然科学版),2006,36(5):736.[doi:10.3969/j.issn.1001-0505.2006.05.011]
 Yang Bo,Zhou Bailing.Vacuum packaged silicon micromachined gyroscope[J].Journal of Southeast University (Natural Science Edition),2006,36(3):736.[doi:10.3969/j.issn.1001-0505.2006.05.011]
[3]王晓雷,张印强,杨成,等.基于数字锁相环控制的硅微陀螺仪驱动模态分析与实验[J].东南大学学报(自然科学版),2013,43(4):747.[doi:10.3969/j.issn.1001-0505.2013.04.014]
 Wang Xiaolei,Zhang Yinqiang,Yang Cheng,et al.Analysis and experiment of drive mode of silicon micro-gyroscope based on digital phased-locked loop control[J].Journal of Southeast University (Natural Science Edition),2013,43(3):747.[doi:10.3969/j.issn.1001-0505.2013.04.014]

备注/Memo

备注/Memo:
收稿日期: 2013-11-22.
作者简介: 杨成(1989—),男,博士生;李宏生(联系人),男,博士,教授,博士生导师,hsli@seu.edu.cn.
基金项目: 预研基金资助项目(9140A09011313JW06119).
引用本文: 杨成,李宏生,陈建元,等.基于傅里叶解调算法的硅微陀螺仪控制系统设计与试验[J].东南大学学报:自然科学版,2014,44(3):550-555. [doi:10.3969/j.issn.1001-0505.2014.03.018]
更新日期/Last Update: 2014-05-20