[1]刘平,吴刚,唐柏鉴,等.PVDF涂层织物拉伸力学性能试验研究[J].东南大学学报(自然科学版),2017,47(6):1195-1200.[doi:10.3969/j.issn.1001-0505.2017.06.018]
 Liu Ping,Wu Gang,Tang Baijian,et al.Experimental study on mechanical properties of PVDF textile[J].Journal of Southeast University (Natural Science Edition),2017,47(6):1195-1200.[doi:10.3969/j.issn.1001-0505.2017.06.018]
点击复制

PVDF涂层织物拉伸力学性能试验研究()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
47
期数:
2017年第6期
页码:
1195-1200
栏目:
材料科学与工程
出版日期:
2017-11-20

文章信息/Info

Title:
Experimental study on mechanical properties of PVDF textile
作者:
刘平12吴刚1唐柏鉴3周道传2缪玮2
1东南大学土木工程学院, 南京 210096; 2江苏科技大学土木工程与建筑学院, 镇江 212005; 3苏州科技大学土木工程学院, 苏州 215009
Author(s):
Liu Ping12 Wu Gang1 Tang Baijian3 Zhou Daochuan2 Miao Wei2
1School of Civil Engineering, Southeast University, Nanjing 210096, China
2School of Civil Engineering and Architecture, Jiangsu University of Science and Technology, Zhenjiang 212005, China
3School of Civil Engineering, Suzhou University of Science and Technology, Suzhou 215009, China
关键词:
膜材 双轴试验 力学性能 正交各向异性
Keywords:
membrane bi-axial test mechanical property orthotropic
分类号:
TU599
DOI:
10.3969/j.issn.1001-0505.2017.06.018
摘要:
为获得膜材的本构关系规律,以SH-1050P膜材为试验对象, 采用纱线与拉伸方向夹角α为参数进行单轴拉伸破坏试验;然后进行多比例位移加载下的双轴拉伸试验,得到完整的单、双轴试验结果.假设膜片应变均匀且铺层与纱线无滑移,对单轴下膜片弹性模量与夹角α的关系进行了理论推导,并获得膜材力学参数与方向角α的解析公式.同时,假设膜片在双轴加载下为正交弹性双向材料,求解出不同比例加载下的双轴弹性模量与泊松比.结果表明,单轴下膜片弹性模量可按2%的应变划分为弹性与塑性2个阶段,其值与2倍夹角的正弦成线性关系.而双轴试验情况下,在1∶1等量加载时,双轴弹性模量与单轴相同;在非等量加载时,双向加载力离散越大,双轴弹性模量离散性也越大.
Abstract:
To obtain the constitutive model of membrane, the uniaxial tensile failure experiments of SH-1050P textile were carried out using the angle of yarn and tensile direction as the parameters. Besides, the biaxial tensile test under biaxial loading with multiple loading ratio was also conducted to obtain the complete uniaxial/biaxial test data. The analytical formula about the relationship between the elastic modulus and the angle was derived based on the assumption that the strains of all the membranes are uniform and there is no slippage between ply and yarn, which can explain the experimental phenomena well. Meanwhile, the biaxial elastic modulus and Poisson’s ratio under different proportional loading were obtained with the assumption of the membrane being a biaxial orthogonal elastic model under biaxial loading. The results show that the elastic modulus of the uniaxial test can be divided into the elasticity and plasticity stages according to the ultimate elastic strain of 2%. Both two elastic modulus values are proportional to 2 times of angle. As for the bi-axial test, the elastic modulus is the same as that of the uniaxial test when the loading ratio is 1∶1, and the discreteness of elastic modulus increases with the discreteness of the loading ratio.

参考文献/References:

[1] Gosling P D, Bridgens B N, Zhang L. Adoption of a reliability approach for membrane structure analysis[J].Structural Safety, 2012, 40: 39-50. DOI:10.1016/j.strusafe.2012.09.002.
[2] Gosling P D, Bridgens B N, Albrecht A, et al. Analysis and design of membrane structures: Results of a round robin exercise[J]. Engineering Structures, 2013, 48: 313-328. DOI:10.1016/j.engstruct.2012.10.008.
[3] Minami H, Motobayashi S. Biaxial deformation property of coated plain-weave fabrics[C]//Proceedings of Symposium on Architectural Fabric Structures. Orlando, USA,1984:1782-1789.
[4] 卫东, 杨庆山, 沈世钊. 张拉膜结构模型全过程试验研究[J]. 建筑结构学报, 2004, 25(2): 49-56,78. DOI:10.3321/j.issn:1000-6869.2004.02.009.
Wei Dong, Yang Qingshan, Shen Shizhao. Study on full process experiment of full-scale tensioned membrane structure[J]. Journal of Building Structures, 2004, 25(2): 49-56,78. DOI:10.3321/j.issn:1000-6869.2004.02.009. (in Chinese)
[5] 谢顺利, 张彩丽, 张春丽, 等. 厚度增强复合材料研究现状及进展[J]. 硅酸盐通报, 2016, 35(2): 464-467,473.
  Xie Shunli, Zhang Caili, Zhang Chunli, et al. Development of composite laminates with through-thickness-reinforcements[J]. Bulletin of the Chinese Ceramic Society, 2016, 35(2): 464-467,473.(in Chinese)
[6] 蒋晓梅, 陈国强, 芮延年. 织物表面涂层沉积过程模拟[J]. 纺织学报, 2015, 36(1): 72-76. DOI:10.13475/j.fzxb.20140102805.
Jiang Xiaomei, Chen Guoqiang, Rui Yannian. Simulation of coating deposition process on fabric surface[J].Journal of Textile Research, 2015, 36(1): 72-76. DOI:10.13475/j.fzxb.20140102805. (in Chinese)
[7] 陈建稳, 陈务军, 赵兵. 浮空器膜材循环拉伸力学性能及弹性常数研究[J]. 湖南大学学报(自然科学版), 2013, 40(6): 40-46. DOI:10.3969/j.issn.1674-2974.2013.06.007.
Chen Jianwen, Chen Wujun, Zhao Bing. Study of the mechanical properties and elastic constants of aerostat envelope fabric under cyclic tensile loading[J]. Journal of Hunan University(Natural Sciences), 2013, 40(6): 40-46. DOI:10.3969/j.issn.1674-2974.2013.06.007. (in Chinese)
[8] Sun X Y, Chen Z Q, Wu Y, et al Numerical studies on the behaviors of wind-structure interaction for membrane structures[C]//The Seventh International Colloquium on Bluff Body Aerodynamics and Applications. Shanghai, China, 2012:765-772.
[9] Yang Q S, Wu Y, Zhu W L. Experimental study on interaction between membrane structures and wind environment[J]. Earthquake Engineering and Engineering Vibration, 2010, 9(4):523-532.
[10] 李大鹏. 建筑用纺织材料的应用[J]. 现代装饰(理论), 2016,43(6):250.
  Li Dapeng. Application research progress of textile material used in construction field[J]. Cotton Textile Technology, 2016, 43(6):250.
[11] 王茜. 用材料去思维——浅谈膜结构[J]. 艺术品鉴, 2015(6): 310+309.
[12] Drioli E, Ali A, Macedonio F. Membrane distillation: Recent developments and perspectives[J]. Desalination, 2015, 356: 56-84. DOI:10.1016/j.desal.2014.10.028.
[13] Zhan M L, Zhang W J, Sheng J C, et al. Membrane finite element method for simulating fluid flow in porous medium[J].Water Science and Engineering, 2009, 2(2):43-51.
[14] Zhang Q L, Wu H G. Using softened contact relationship describing compressible membrane in FEA of spiral case structure[J]. Archives of Civil and Mechanical Engineering, 2013, 13(4): 506-517. DOI:10.1016/j.acme.2013.04.009.
[15] Guo J, Zheng Z, Wu S. An impact vibration experimental research on the pretension rectangular membrane structure[J]. Advances in Materials Science and Engineering, 2015, 2015: 1-8. DOI:10.1155/2015/387153.

备注/Memo

备注/Memo:
收稿日期: 2017-04-10.
作者简介: 刘平(1983—),男,博士,讲师,liupinghaiyan@163.com.
基金项目: 国家自然科学基金资助项目(51508238)、江苏省博士后科研基金资助项目(1601014B).
引用本文: 刘平,吴刚,唐柏鉴,等.PVDF涂层织物拉伸力学性能试验研究[J].东南大学学报(自然科学版),2017,47(6):1195-1200. DOI:10.3969/j.issn.1001-0505.2017.06.018.
更新日期/Last Update: 2017-11-20