[1]徐力刚,黄亚继,王健,等.基于炉膛结渣监测模型的吹灰优化[J].东南大学学报(自然科学版),2018,48(1):63-70.[doi:10.3969/j.issn.1001-0505.2018.01.010]
 Xu Ligang,Huang Yaji,Wang Jian,et al.Soot-blowing optimization based on model of slagging monitoring around boiler furnace[J].Journal of Southeast University (Natural Science Edition),2018,48(1):63-70.[doi:10.3969/j.issn.1001-0505.2018.01.010]
点击复制

基于炉膛结渣监测模型的吹灰优化()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
48
期数:
2018年第1期
页码:
63-70
栏目:
能源与动力工程
出版日期:
2018-01-20

文章信息/Info

Title:
Soot-blowing optimization based on model of slagging monitoring around boiler furnace
作者:
徐力刚1黄亚继1王健1岳峻峰2邹磊2杨钊1
1东南大学能源热转换及其过程测控教育部重点实验室, 南京 210096; 2江苏方天电力技术有限公司, 南京 211102
Author(s):
Xu Ligang1 Huang Yaji1 Wang Jian1 Yue Junfeng2 Zou Lei2 Yang Zhao1
1Key Laboratory of Energy Thermal Conversion and Control of Ministry of Education, Southeast University, Nanjing 210096, China
2Jiangsu Frontier Electric Technology Co., Ltd., Nanjing 211102, China
关键词:
炉膛 结渣监测 吹灰优化 拟合优度
Keywords:
furnace slagging monitoring soot-blowing optimization fitting goodness
分类号:
TK227.3
DOI:
10.3969/j.issn.1001-0505.2018.01.010
摘要:
针对目前锅炉炉膛吹灰方式不合理的情况,建立炉膛结渣监测模型.通过实例计算分析了监测模型的适用性,并指出根据监测结果执行吹灰操作所存在的问题.提出一种基于单位时间炉膛传热量最大的吹灰优化模型,通过实例计算分析优化效果并与现有吹灰优化模型作对比.最后制定了吹灰优化方案.实例计算结果表明:结渣监测模型适用于负荷较为稳定的工况,而负荷变化过快工况下的监测结果波动较大且不能作为吹灰操作判据;吹灰优化计算中采用相同工况下的多组污染率平均值拟合可以获得较好的拟合优度,吹灰优化模型能使炉膛在500 MW负荷下提高相当于2.31 kg/min标煤的发热量,且比现有其他模型更适用于锅炉实际吹灰操作.
Abstract:
Aiming at the situation that the present soot-blowing operation was unreasonable, the model of slagging monitoring around boiler furnace was built and the applicability of the monitoring model was analyzed. Through example analysis, the problems of the soot-blowing operation based on monitoring results were pointed out. A soot-blowing optimization model based on maximum heat transfer capacity per unit time of furnace was proposed, and its optimization efficiency was analyzed and compared with other models in existing studies by calculation. Finally, the soot-blowing optimization strategy was set out. The calculation results show that the model of slagging monitoring is applicable for the stable load and its results could be undulate in various loads inapplicable for soot-blowing operation. Using the average of multiple data of fouling factor to fit the curve can obtain better fitting goodness in soot-blowing optimization calculation. The soot-blowing optimization model can enhance the thermal value equivalent to 2.31 kg/min standard coal at 500 MW load of target boiler. Thus, it is more applicable for actual soot-blowing operation than other models in existing studies.

参考文献/References:

[1] Ma Z, Iman F, Lu P, et al. A comprehensive slagging and fouling prediction tool for coal-fired boilers and its validation/application[J]. Fuel Processing Technology, 2007, 88(11/12): 1035-1043. DOI:10.1016/j.fuproc.2007.06.025.
[2] Romeo L M, Gareta R. Fouling control in biomass boilers[J]. Biomass and Bioenergy, 2009, 33(5): 854-861. DOI:10.1016/j.biombioe.2009.01.008.
[3] Zhang S P, Shen G Q, An L S, et al. Ash fouling monitoring based on acoustic pyrometry in boiler furnaces[J]. Applied Thermal Engineering, 2015, 84: 74-81. DOI:10.1016/j.applthermaleng.2015.03.019.
[4] 马美倩, 吕伟为, 沈国清, 等. 基于声学测温与最小二乘支持向量机的锅炉炉膛灰污监测方法[J]. 电力科学与工程, 2012, 28(7): 46-50,70. DOI:10.3969/j.issn.1672-0792.2012.07.009.
Ma Meiqian, Lü Weiwei, Shen Guoqing, et al. Method of furnace fouling monitoring based on acoustic pyrometry and least squares support vector machine[J]. Electric Power Science and Engineering, 2012, 28(7): 46-50,70. DOI:10.3969/j.issn.1672-0792.2012.07.009. (in Chinese)
[5] 俞海淼, 曹欣玉, 李志, 等. 应用灰污热流计监测燃煤锅炉炉膛灰污结渣的动态过程[J]. 动力工程, 2005, 25(1): 88-91. DOI:10.3321/j.issn:1000-6761.2005.01.018.
Yu Haimiao, Cao Xinyu, Li Zhi, et al. Research on the dynamic process of ash deposition in boilers with heat flux probes[J]. Chinese Journal of Power Engineering, 2005, 25(1): 88-91. DOI:10.3321/j.issn:1000-6761.2005.01.018. (in Chinese)
[6] 蒋泓亮, 安连锁, 沈国清. 基于清洁因子模型的炉膛结渣污染监测的研究[J]. 电力科学与工程, 2012, 28(9): 33-37.
  Jiang Hongliang, An Liansuo, Shen Guoqing. Boiler slagging pollution monitoring research based on the model of clean factor[J]. Electric Power Science and Engineering, 2012, 28(9): 33-37.(in Chinese)
[7] 杨祥良, 李庚生, 安连锁, 等. 基于声学测温技术的电站锅炉水冷壁灰污监测方法[J]. 华北电力大学学报, 2010, 37(3): 59-63. DOI:10.3969/j.issn.1007-2691.2010.03.011.
Yang Xiangliang, Li Gengsheng, An Liansuo, et al. A method of furnace water wall slagging monitoring in power plant based on acoustic pyrometry[J]. Journal of North China Electric Power University, 2010, 37(3): 59-63. DOI:10.3969/j.issn.1007-2691.2010.03.011. (in Chinese)
[8] 施永红, 云峰, 魏铁铮. 燃煤电站锅炉受热面积灰结渣在线监测的研究[J]. 电站系统工程, 2010, 26(6): 49-50, 53. DOI:10.3969/j.issn.1005-006X.2010.06.017.
Shi Yonghong, Yun Feng, Wei Tiezheng. Research on ash fouling monitoring of heating surfaces in coal-fired utility boiler[J]. Power System Engineering, 2010, 26(6): 49-50, 53. DOI:10.3969/j.issn.1005-006X.2010.06.017. (in Chinese)
[9] 北京锅炉厂. 锅炉机组热力计算标准方法 [M].北京: 机械工业出版社, 1976: 28-38.
[10] 周强泰, 赵伶玲. 考虑辐射强度沿截面方向减弱的炉内传热公式[J]. 东南大学学报(自然科学版), 2008, 38(6): 1004-1010. DOI:10.3321/j.issn:1001-0505.2008.06.014.
Zhou Qiangtai, Zhao Lingling. Study on radiation heat transfer in boiler furnaces by taking radiant intensity attenuation in cross section into consideration[J]. Journal of Southeast University(Natural Science Edition), 2008, 38(6): 1004-1010. DOI:10.3321/j.issn:1001-0505.2008.06.014. (in Chinese)
[11] 周强泰. 锅炉原理 [M]. 3版.北京: 中国电力出版社, 2013:161-176.
[12] 张衍国. 炉内传热原理与计算[M]. 北京: 清华大学出版社, 2008: 103-105.
[13] 阎维平, 朱予东, 谭蓬, 等. 变负荷工况下锅炉对流受热面污染的监测[J]. 动力工程, 2007, 27(1): 58-61, 129. DOI:10.3321/j.issn:1000-6761.2007.01.014.
Yan Weiping, Zhu Yudong, Tan Peng, et al. Ash fouling monitoring of boilers convective heat delivery surfaces during variable load operation[J]. Journal of Power Engineering, 2007, 27(1): 58-61, 129. DOI:10.3321/j.issn:1000-6761.2007.01.014. (in Chinese)
[14] 欧宗现. 1 000 MW超超临界机组受热面污染在线监测方法研究[D]. 保定:华北电力大学能源与动力工程学院, 2009.
[15] 欧宗现, 阎维平, 朱予东. 燃煤电站锅炉的吹灰策略研究[J]. 热能动力工程, 2009, 24(3): 342-346.
  Ou Zongxian, Yan Weiping, Zhu Yudong. Research on soot-blowing tactics for coal-fred utility boilers[J]. Journal of Engineering for Thermal Energy and Power, 2009, 24(3): 342-346.(in Chinese)
[16] 邓喆. 基于声学测温与神经网络的炉膛污染在线监测研究[D]. 保定:华北电力大学能源与动力工程学院, 2012.
[17] 陈宝康, 阎维平, 朱予东, 等. 燃煤电站锅炉对流受热面灰污层增长预测模型的研究[J]. 华北电力大学学报, 2004,31(2): 32-35. DOI:10.3969/j.issn.1007-2691.2004.02.009.
Chen Baokang, Yan Weiping, Zhu Yudong, et al. Prediction of ash fouling on heat transfer surface of coal-fired utility boiler[J]. Journal of North China Electric Power University, 2004,31(2): 32-35. DOI:10.3969/j.issn.1007-2691.2004.02.009. (in Chinese)
[18] Shi Y H, Wang J C, Liu Z F. On-line monitoring of ash fouling and soot-blowing optimization for convective heat exchanger in coal-fired power plant boiler[J]. Applied Thermal Engineering, 2015, 78: 39-50. DOI:10.1016/j.applthermaleng.2014.12.002.
[19] Peña B, Teruel E, Díez L I. Towards soot-blowing optimization in superheaters[J]. Applied Thermal Engineering, 2013, 61(2): 737-746. DOI:10.1016/j.applthermaleng.2013.08.047.

备注/Memo

备注/Memo:
收稿日期: 2017-06-08.
作者简介: 徐力刚(1991—),男,博士生;黄亚继(联系人),男,博士,教授,博士生导师,heyyj@seu.edu.cn.
基金项目: 国家自然科学基金资助项目(51676040)、江苏省产业前瞻与共性关键技术资助项目(BE2017037)、江苏省前瞻性联合研究资助项目(BY2016076-04).
引用本文: 徐力刚,黄亚继,王健,等.基于炉膛结渣监测模型的吹灰优化[J].东南大学学报(自然科学版),2018,48(1):63-70. DOI:10.3969/j.issn.1001-0505.2018.01.010.
更新日期/Last Update: 2018-01-20