[1]武念铎,罗永峰,强旭红,等.高强钢外伸式端板节点火灾性能试验与数值分析[J].东南大学学报(自然科学版),2018,48(1):138-145.[doi:10.3969/j.issn.1001-0505.2018.01.021]
 Wu Nianduo,Luo Yongfeng,Qiang Xuhong,et al.Experimental and numerical analysis on high strength steel extended endplate connections in fire[J].Journal of Southeast University (Natural Science Edition),2018,48(1):138-145.[doi:10.3969/j.issn.1001-0505.2018.01.021]
点击复制

高强钢外伸式端板节点火灾性能试验与数值分析()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
48
期数:
2018年第1期
页码:
138-145
栏目:
土木工程
出版日期:
2018-01-20

文章信息/Info

Title:
Experimental and numerical analysis on high strength steel extended endplate connections in fire
作者:
武念铎1罗永峰1强旭红1刘晓2姜旭1
1同济大学土木工程学院, 上海 200092; 2上海宝冶工程技术有限公司, 上海 200941
Author(s):
Wu Nianduo1 Luo Yongfeng1 Qiang Xuhong1 Liu Xiao2 Jiang Xu1
1College of Civil Engineering, Tongji University, Shanghai 200092, China
2Shanghai Baoye Engineering Technology Co., Ltd., Shanghai 200941, China
关键词:
高强钢 外伸式端板连接节点 火灾 有限元分析
Keywords:
high strength steel extended endplate connection fire finite element analysis
分类号:
TU411.3
DOI:
10.3969/j.issn.1001-0505.2018.01.021
摘要:
对1个Q690和2个Q960高强钢外伸式端板连接节点进行高温550 ℃ 下的足尺模型试验研究和有限元模拟分析,并将试验结果与采用欧洲现行钢结构设计规范EN 1993-1-8的计算结果及有限元分析结果进行对比.结果表明,550 ℃时,Q690和Q960高强钢端板连接节点的承载力分别为常温时的45%和46%,初始转动刚度为常温时的57%和65%,但转动能力分别为常温时的1.43倍和1.66倍.EN 1993-1-8中基于普通钢端板连接节点常温力学性能所提出的组件法可直接用于预测高强钢端板连接节点火灾下的失效模式和承载能力,但初始转动刚度的计算公式并不适用,且采用EN 1993-1-8关于保障节点转动能力的相关要求对高强钢端板连接节点进行抗火设计偏于保守.有限元模型可准确模拟该端板连接节点火灾下的弯矩转角关系和失效模式.
Abstract:
The full-scale experimental study and the simulation analysis on the mechanical behaviors of one Q690 and two Q960 high strength steel endplate connections at the elevated temperature 550 ℃ were carried out.The experimental results were compared with the results calculated according to the current European steel structure design code EN 1993-1-8 and the finite element analysis results. The results show that at 550 ℃, the plastic moment resistance of Q690 and Q960 high strength steel endplate connections are 45% and 46% of those at ambient temperature, and the initial rotational stiffness are 57% and 65% of those at ambient temperature, respectively. However, the rotation capacity of Q690 and Q960 high strength steel endplate connections are 1.43 and 1.66 times that at ambient temperature. The component method in EN 1993-1-8 proposed based on the connections made of mild steels at ambient temperature can be used to calculate the plastic resistance and predict the failure mode of the high strength steel endplate connections in fire, but it is not suitable to predict the initial rotational stiffness. The suggestion about the rotation capacity of the connections proposed in EN 1993-1-8 is too conservative for high strength steel endplate connections in fire. The finite element models can accurately simulate the moment-rotation relationships and the failure modes of the connections in fire.

参考文献/References:

[1] European Committee for Standardization. EN 1993-1-2 Eurocode 3—Design of steel structures—Part 1-2: General rules-structural fire design [S]. Brussels: CEN, 2005: 45-46.
[2] Al-Jabri K S. Modelling and simulation of beam-to-column joints at elevated temperature: A review [J]. Journal of the Franklin Institute, 2011, 348(7):1695-1716. DOI:10.1016/j.jfranklin.2010.09.002.
[3] CECS 200:2006. 建筑钢结构防火技术规范[S]. 北京: 中国计划出版社,2006.
[4] Coelho A M G. Characterization of the bolted endplate beam-to-column steel connections [D]. Coimbra, Portugal: School of Structural Engineering of University of Coimbra, 2004.
[5] European Committee for Standardization. EN 1993-1-8 Eurocode 3—Design of steel structures—Part 1-8: Design of joints [S]. Brussels: CEN, 2005.
[6] 孙飞飞, 孙密,李国强, 等. Q690高强钢端板连接梁柱节点抗震性能试验研究[J]. 建筑结构学报, 2014, 35(4): 116-124.
  Sun Feifei, Sun Mi, Li Guoqiang, et al. Experimental study on seismic behavior of high-strength steel beam-to-column end-plate connections [J]. Journal of Building Structures, 2014, 35(4): 116-124.(in Chinese)
[7] Qiang X. Behavior of high strength steel endplate connections in fire and after fire [D]. Delft: School of Civil Engineering and Geosciences of Delft University of Technology, 2013.
[8] European Committee for Standardization. EN 1993-1-12 Eurocode 3—Design of steel structures—Part 1-12: Additional rules for the extension of EN 1993 up to steel grade S700 [S]. Brussels:CEN, 2007.
[9] Qiang X, Bijlaard F S K, Kolstein H. Post-fire mechanical properties of high strength structural steels S460 and S690[J]. Engineering Structures, 2012, 35: 1-10. DOI:10.1016/j.engstruct.2011.11.005.
[10] Qiang X, Bijlaard F S K, Kolstein H. Post-fire performance of very high strength steel S960[J]. Journal of Constructional Steel Research, 2013, 80: 235-242. DOI:10.1016/j.jcsr.2012.09.002.
[11] 李国强, 李明菲, 殷颖智, 等. 高温下高强度螺栓20MnTiB钢的材料性能试验研究[J]. 土木工程学报, 2001, 34(5): 100-104. DOI:10.3321/j.issn:1000-131X.2001.05.020.
Li Guoqiang, Li Mingfei, Yin Yingzhi, et al. Experimental studies on the behavior of high-strength bolts made of 20MnTiB steel at elevated temperatures[J]. China Civil Engineering Journal, 2001, 34(5): 100-104. DOI:10.3321/j.issn:1000-131X.2001.05.020. (in Chinese)
[12] 强旭红, 武念铎, 罗永峰, 等. 全高强钢端板节点火灾后性能试验[J]. 同济大学学报(自然科学版), 2017, 45(2): 173-179,194. DOI:10.11908/j.issn.0253-374x.2017.02.003.
Qiang Xuhong, Wu Nianduo, Luo Yongfeng, et al. Experimental research on post-fire behavior of full high strength steel endplate connections[J]. Journal of Tongji University(Natural Science), 2017, 45(2): 173-179,194. DOI:10.11908/j.issn.0253-374x.2017.02.003. (in Chinese)
[13] Wilkinson S, Hurdman G, Crowther A. A moment resisting connection for earthquake resistant structures[J]. Journal of Constructional Steel Research, 2006, 62(3): 295-302. DOI:10.1016/j.jcsr.2005.07.011.
[14] Gao Y, Yu H, Shi G. Resistance of flush endplate connections under tension and shear in fire[J]. Journal of Constructional Steel Research, 2013, 86: 195-205. DOI:10.1016/j.jcsr.2013.03.015.

备注/Memo

备注/Memo:
收稿日期: 2017-05-27.
作者简介: 武念铎(1990—),男,博士生;强旭红(联系人),女,博士,助理研究员,qiangxuhong@tongji.edu.cn.
基金项目: 国家重点研发计划重点专项资助项目(2017YFB0304701)、国家自然科学基金资助项目(51408150)、财政部施工新技术研究与开发资助项目(财企(2013)235号).
引用本文: 武念铎,罗永峰,强旭红,等.高强钢外伸式端板节点火灾性能试验与数值分析[J].东南大学学报(自然科学版),2018,48(1):138-145. DOI:10.3969/j.issn.1001-0505.2018.01.021.
更新日期/Last Update: 2018-01-20