[1]杨波,江亿,付林,等.用于烟气全热回收的全开式吸收式热泵[J].东南大学学报(自然科学版),2018,48(5):789-793.[doi:10.3969/j.issn.1001-0505.2018.05.002]
 Yang Bo,Jiang Yi,Fu Lin,et al.Full-open absorption heat pump for total heat recovery of flue gas[J].Journal of Southeast University (Natural Science Edition),2018,48(5):789-793.[doi:10.3969/j.issn.1001-0505.2018.05.002]
点击复制

用于烟气全热回收的全开式吸收式热泵()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
48
期数:
2018年第5期
页码:
789-793
栏目:
能源与动力工程
出版日期:
2018-09-20

文章信息/Info

Title:
Full-open absorption heat pump for total heat recovery of flue gas
作者:
杨波江亿付林张世钢
清华大学建筑学院, 北京 100084
Author(s):
Yang Bo Jiang Yi Fu Lin Zhang Shigang
School of Architecture, Tsinghua University, Beijing 100084, China
关键词:
吸收式 余热回收 全热换热 耦合传热传质
Keywords:
absorption waste heat recovery total heat transfer conjugate heat and mass transfer
分类号:
TK11.5
DOI:
10.3969/j.issn.1001-0505.2018.05.002
摘要:
提出一种新型全开式吸收式热泵技术用于烟气余热回收,利用燃烧器产生的高温烟气在发生器中驱动稀溶液再生,降温、加湿后的烟气经冷凝器被冷却水冷却到饱和状态,再与待回收的目标烟气混合进入吸收器,被浓溶液吸收.其中,冷凝和吸收过程放出的热量可用于供热.系统的3个主要部件均为喷淋塔结构,节省了传热管材,有效降低初投资;同时,这种全开式常压结构对强度要求不高,可进一步降低制造和维护成本.该技术在热网回水温度较高时仍能有效回收烟气余热,而且烟气最终被处理到过热状态,避免了排出过程中结露腐蚀的问题.采用欧拉-拉格朗日方法建立了细致的液滴动力学和耦合传热传质模型,根据该模型理论计算,设计并搭建了实验样机,结果表明,系统COP最高达到1.621,排烟露点最低达到36.2 ℃,相对湿度为62.4%.仿真与实验结果吻合较好,理论模型得到了验证.
Abstract:
A novel full-open absorption heat pump(FOAHP)for the waste heat recovery of the flue gas was proposed. The high-temperature flue gas produced by the burner drived the regeneration of the weak solution in the generator. Having been cooled and humidified in the generator, the driving flue gas entered the condenser and was cooled to the saturation state by the cooling water. The residual driving flue gas was mixed with the objective flue gas and was recovered by the strong solution in the absorber altogether. The condensation heat and the absorption heat were used for district heating. The three main components, including generator, condenser and absorber were all spray tower structured, saving considerable heat transfer materials and therefore cutting the initial investment much. Besides, all the spray towers were operated under atmospheric pressure, without requirement for high mechanic strength, so the fabrication and maintenance cost can be further reduced. The system could efficiently recover waste heat even if the return temperature of the district heating network was relatively high. Moreover, the objective flue gas was processed to the superheat state, in avoidance of the condensing corrosion in the discharging process. A detailed model for the liquid particle dynamics and the conjugate heat and mass transfer by Eulerian-Lagrangian formulation was established. On the basis of the simulation results, a prototype system was developed and experimented. Experimental results show that the system can achieve the COP of 1.621, the exit dew point of 36.2 ℃ and 62.4% RH Simulation results are well in agreement with the experimental ones.

参考文献/References:

[1] Wang C J, He B S, Sun S Y, et al. Application of a low pressure economizer for waste heat recovery from the exhaust flue gas in a 600 MW power plant[J]. Energy, 2012, 48(1): 196-202. DOI:10.1016/j.energy.2012.01.045.
[2] Kilkovsky B, Stehlik P, Jegla Z, et al. Heat exchangers for energy recovery in waste and biomass to energy technologies: Ⅰ. Energy recovery from flue gas[J]. Applied Thermal Engineering, 2014, 64(1/2): 213-223. DOI:10.1016/j.applthermaleng.2013.11.041.
[3] Xu G, Xu C, Yang Y P, et al. A novel flue gas waste heat recovery system for coal-fired ultra-supercritical power plants[J]. Applied Thermal Engineering, 2014, 67(1/2): 240-249. DOI:10.1016/j.applthermaleng.2014.03.038.
[4] Jia L, Li X P, Sun J D, et al. An experimental study on latent heat recovery of exhaust wet flue gas[J]. Journal of Thermal Science, 2002, 11(2): 144-147. DOI:10.1007/s11630-002-0035-z.
[5] Hebenstreit B, Schnetzinger R, Ohnmacht R, et al. Techno-economic study of a heat pump enhanced flue gas heat recovery for biomass boilers[J]. Biomass and Bioenergy, 2014, 71: 12-22. DOI:10.1016/j.biombioe.2014.01.048.
[6] Zhao X L, Fu L, Wang X Y, et al. Flue gas recovery system for natural gas combined heat and power plant with distributed peak-shaving heat pumps[J]. Applied Thermal Engineering, 2017, 111: 599-607. DOI:10.1016/j.applthermaleng.2016.09.130.
[7]Johansson L, Westerlund L. An open absorption system installed at a sawmill description of pilot plant used for timber and bio-fuel drying[J].Energy, 2000, 25(11): 1067-1079. DOI:10.1016/s0360-5442(00)00026-8.
[8] 马连强, 陈嘉宾, 马学虎, 等. 回收氯碱蒸发工段废热的开式吸收式热泵的热力学性能分析[J]. 节能技术, 2004, 22(1): 15-17. DOI:10.3969/j.issn.1002-6339.2004.01.006.
Ma Lianqiang, Chen Jiabin, Ma Xuehu, et al. Thermodynamic analysis of open absorption heat pump used in waste heat recovery in evaporation of chlorine-alkali[J]. Energy Conservation Technology, 2004, 22(1): 15-17. DOI:10.3969/j.issn.1002-6339.2004.01.006. (in Chinese)
[9] 马连强. 利用吸收式热泵回收氯碱蒸发工段废热的研究[D]. 大连: 大连理工大学化工学院, 2004.
[10] Wei M L, Yuan W X, Song Z J, et al. Simulation of a heat pump system for total heat recovery from flue gas[J]. Applied Thermal Engineering, 2015, 86: 326-332. DOI:10.1016/j.applthermaleng.2015.04.061.
[11] 叶碧翠, 陈光明, 刘骏, 等. 新型两级开式吸收式热泵系统性能[J]. 化工学报, 2014(z2): 248-255. DOI:10.3969/j.issn.0438-1157.2014.z2.037.
Ye Bicui, Chen Guangming, Liu Jun, et al. A novel double-stage open absorption heat pump system[J]. CIESC Jorunal, 2014(z2): 248-255. DOI:10.3969/j.issn.0438-1157.2014.z2.037. (in Chinese)
[12] 刘骏, 叶碧翠, 陈光明. 用于废热回收的开式吸收式热泵性能研究[J]. 工程热物理学报, 2015, 36(3): 474-477.
  Liu Jun, Ye Bicui, Chen Guangming.Performance study on an open cycle absorption heat pump for exhaust heat recycling[J]. Journal of Engineering Thermophysics, 2015, 36(3): 474-477.(in Chinese)
[13] 刘骏. 开式绝热吸收系统及绝热型吸收器性能研究[D]. 杭州: 浙江大学能源工程学院, 2015.
[14] Ye B C, Liu J, Xu X G, et al. A new open absorption heat pump for latent heat recovery from moist gas[J]. Energy Conversion and Management, 2015, 94: 438-446. DOI:10.1016/j.enconman.2015.02.001.
[15] Wang Z Y, Zhang X Y, Li Z. Evaluation of a flue gas driven open absorption system for heat and water recovery from fossil fuel boilers[J]. Energy Conversion and Management, 2016, 128: 57-65. DOI:10.1016/j.enconman.2016.09.050.
[16] 魏璠. 开式循环吸收式热泵理论及部件实验研究[D]. 北京: 中国科学院研究生院工程热物理研究所, 2008.
[17] 魏璠, 肖云汉, 张士杰. 第二类开式吸收式热泵系统设计和性能分析[J]. 太阳能学报, 2013, 34(3): 427-432. DOI:10.3969/j.issn.0254-0096.2013.03.012.
Wei Fan, Xiao Yunhan, Zhang Shijie. Study of the performance on open cycle absorption heat transformer[J]. ACTA Energiae Solaris Sinica, 2013, 34(3): 427-432. DOI:10.3969/j.issn.0254-0096.2013.03.012. (in Chinese)
[18] Kachhwaha S S, Dhar P L, Kale S R. Experimental studies and numerical simulation of evaporative cooling of air with a water spray: Ⅰ. Horizontal parallel flow[J]. International Journal of Heat and Mass Transfer, 1998, 41(2): 447-464. DOI:10.1016/s0017-9310(97)00133-6.
[19] Blagojevi B, Bajsi I. A one-dimensional numerical model of heat and mass transfer in air-water droplet flow[J].Heat and Mass Transfer, 1996, 31(6): 435-441. DOI:10.1007/s002310050080.

相似文献/References:

[1]王帅,吴新,李诗,等.防腐镀(涂)层管束表面对流凝结换热特性[J].东南大学学报(自然科学版),2016,46(2):289.[doi:10.3969/j.issn.1001-0505.2016.02.011]
 Wang Shuai,Wu Xin,Li Shi,et al.Convection condensation heat transfer characteristics on different antiseptic pipe surfaces[J].Journal of Southeast University (Natural Science Edition),2016,46(5):289.[doi:10.3969/j.issn.1001-0505.2016.02.011]

备注/Memo

备注/Memo:
收稿日期: 2018-03-06.
作者简介: 杨波(1988—),男,博士,dweeb@mail.tsinghua.edu.cn.
基金项目: 博士后科学基金资助项目(2017M620790).
引用本文: 杨波,江亿,付林,等.用于烟气全热回收的全开式吸收式热泵[J].东南大学学报(自然科学版),2018,48(5):789-793. DOI:10.3969/j.issn.1001-0505.2018.05.002.
更新日期/Last Update: 2018-09-20