[1]高磊,张峰,叶见曙,等.侧向约束下FRP加固混凝土界面黏结性能[J].东南大学学报(自然科学版),2018,48(6):996-1003.[doi:10.3969/j.issn.1001-0505.2018.06.003]
 Gao Lei,Zhang Feng,Ye Jianshu,et al.Effects of lateral constraint on the behaviour of FRP-to-concrete bond[J].Journal of Southeast University (Natural Science Edition),2018,48(6):996-1003.[doi:10.3969/j.issn.1001-0505.2018.06.003]
点击复制

侧向约束下FRP加固混凝土界面黏结性能()
分享到:

《东南大学学报(自然科学版)》[ISSN:1001-0505/CN:32-1178/N]

卷:
48
期数:
2018年第6期
页码:
996-1003
栏目:
土木工程
出版日期:
2018-11-20

文章信息/Info

Title:
Effects of lateral constraint on the behaviour of FRP-to-concrete bond
作者:
高磊1张峰1叶见曙2刘佳琪1
1山东大学岩土与结构工程研究中心, 济南 250061; 2东南大学交通学院, 南京 210096
Author(s):
Gao Lei1 Zhang Feng1 Ye Jianshu2 Liu Jiaqi1
1 Geotechnical and Structural Engineering Research Center, Shandong University, Jinan 250061, China
2 School of Transportation, Southeast University, Nanjing 210096, China
关键词:
FRP加固混凝土 侧向约束 三折线模型 试验 数值模拟
Keywords:
FRP(fibre-reinforced polymer)reinforced concrete lateral constraint trilinear model test numerical simulation
分类号:
TU312
DOI:
10.3969/j.issn.1001-0505.2018.06.003
摘要:
为了揭示侧向约束对FRP-混凝土界面黏结性能的影响,基于三折线黏结-滑移模型开展了侧向约束下FRP黏结混凝土界面剥离全过程分析,推导了FRP-混凝土界面黏结荷载表达式,进行了模型试验、三维数值模拟验证和参数分析.研究结果表明:无限粘贴长度情况下,有侧向约束的FRP-混凝土黏结界面经历了弹性、弹性-软化、弹性-软化-摩擦、软化-摩擦和摩擦5个阶段,界面荷载-滑移关系和黏结应力分布的试验和数值计算结果与理论模型具有较好的一致性.当侧向约束力增加,界面荷载强度和滑移量均会显著提高,因此侧向约束能有效抑制外贴FRP加固的剥离.侧向约束下增加黏结长度或提高FRP刚度均能进一步提高荷载强度,但FRP刚度提高会导致界面延性减小.
Abstract:
To reveal the effect of lateral constraint on the FRP(fibre-reinforced polymer)-to-concrete bond behaviour, the whole process analysis of FRP bonded concrete interface debonding under lateral constraint was carried out based on the trilinear bond-slip model. The expression of FRP-concrete interface load was derived. Model testing, 3D numerical model validation and parametric analysis were performed. The research results show that in the case of infinitely pasted length, the FRP-concrete bonded interface with lateral constraint experiences five stages of elasticity, elasticity-softening, elasticity-softening-friction, softening-friction and friction.The experimental and numerical results of the interface load-slip relationship and the bond distribution are in good agreement with the theoretical model.When the lateral constraint force is increased, the interface load strength and the slip value are both significantly improved, so the lateral constraint can effectively suppress the debonding of the externally attached FRP reinforcement.Increasing the bond length or increasing the FRP stiffness under lateral constraint can further increase the load strength, but increasing the FRP stiffness will lead to a decrease in interface ductility.

参考文献/References:

[1] Yuan H, Teng J G, Seracino R, et al. Full-range behavior of FRP-to-concrete bonded joints[J].Engineering Structures, 2004, 26(5): 553-565. DOI:10.1016/j.engstruct.2003.11.006.
[2] Wu Y F, Xu X S, Sun J B, et al. Analytical solution for the bond strength of externally bonded reinforcement[J].Composite Structures, 2012, 94(11): 3232-3239. DOI:10.1016/j.compstruct.2012.04.026.
[3] Ko H, Matthys S, Palmieri A, et al. Development of a simplified bond stress-slip model for bonded FRP-concrete interfaces[J].Construction and Building Materials, 2014, 68: 142-157. DOI:10.1016/j.conbuildmat.2014.06.037.
[4] Sun W, Peng X, Yu Y. Development of a simplified bond model used for simulating FRP strips bonded to concrete[J].Composite Structures, 2017, 171: 462-472. DOI:10.1016/j.compstruct.2017.03.066.
[5] Mukhtar F M, Faysal R M. A review of test methods for studying the FRP-concrete interfacial bond behavior[J].Construction and Building Materials, 2018, 169: 877-887. DOI:10.1016/j.conbuildmat.2018.02.163.
[6] 郭诗惠, 张建仁, 高勇, 等. 胶层厚度对CFRP板材与混凝土界面黏结性能影响[J]. 公路交通科技, 2015, 32(9): 87-91,97. DOI:10.3969/j.issn.1002-0268.2015.09.014.
Guo Shihui, Zhang Jianren, Gao Yong, et al. Effect of adhesive thickness on bond behavior of CFRP plate-concrete interface[J].Journal of Highway and Transportation Research and Development, 2015, 32(9): 87-91,97. DOI:10.3969/j.issn.1002-0268.2015.09.014. (in Chinese)
[7] 彭晖, 高勇, 谢超, 等. FRP-混凝土界面粘结行为的参数影响研究[J]. 实验力学, 2014, 29(4): 489-498. DOI:10.7520/1001-4888-14-066.
Peng Hui, Gao Yong, Xie Chao, et al. On the influence of parameters on bonding behavior of FRP-concrete interface[J]. Journal of Experimental Mechanics, 2014, 29(4): 489-498. DOI:10.7520/1001-4888-14-066. (in Chinese)
[8] Hadigheh S A, Gravina R J, Setunge S. Influence of the processing techniques on the bond characteristics in externally bonded joints: Experimental and analytical investigations[J].Journal of Composites for Construction, 2015, 20(3): 04015081. DOI:10.1061/(asce)cc.1943-5614.0000646.
[9] 胡克旭, 董坤, 杨耀武. 温度作用对碳纤维-混凝土界面黏结性能的影响[J]. 同济大学学报(自然科学版), 2016, 44(6): 845-852. DOI:10.11908/j.issn.0253-374x.2016.06.005.
Hu Kexu, Dong Kun, Yang Yaowu. Temperature effect on bond behavior of carbon fiber reinforced polymer to concrete interface[J].Journal of Tongji University(Natural Science), 2016, 44(6): 845-852. DOI:10.11908/j.issn.0253-374x.2016.06.005. (in Chinese)
[10] Gao W Y, Dai J G, Teng J G. Analysis of Mode Ⅱ debonding behavior of fiber-reinforced polymer-to-substrate bonded joints subjected to combined thermal and mechanical loading[J].Engineering Fracture Mechanics, 2015, 136: 241-264. DOI:10.1016/j.engfracmech.2015.02.002.
[11] Zhang D M, Gu X L, Yu Q Q, et al. Fully probabilistic analysis of FRP-to-concrete bonded joints considering model uncertainty[J].Composite Structures, 2018, 185: 786-806. DOI:10.1016/j.compstruct.2017.11.058.
[12] Huang Y. Experimental & finite element study of hybrid bonding of FRP to RC structures [D]. Hong Kong, China: City University of Hong Kong, 2007.
[13] Sui L L, Luo M S, Yu K Q, et al. Effect of engineered cementitious composite on the bond behavior between fiber-reinforced polymer and concrete[J].Composite Structures, 2018, 184: 775-788. DOI:10.1016/j.compstruct.2017.10.050.
[14] Bank L C, Arora D. Analysis of RC beams strengthened with mechanically fastened FRP(MF-FRP)strips[J].Composite Structures, 2007, 79(2): 180-191. DOI:10.1016/j.compstruct.2005.12.001.
[15] Liu K, Wu Y F. Analytical identification of bond-slip relationship of EB-FRP joints[J].Composites Part B: Engineering, 2012, 43(4): 1955-1963. DOI:10.1016/j.compositesb.2012.01.048.
[16] Biscaia H C, Chastre C, Silva M A G. Bond-slip model for FRP-to-concrete bonded joints under external compression[J].Composites Part B: Engineering, 2015, 80: 246-259. DOI:10.1016/j.compositesb.2015.06.004.
[17] 江见鲸, 陆新征. 混凝土结构有限元分析[M]. 2版. 北京: 清华大学出版社, 2013.
[18] Thorenfeldt E, Tomaszewicz A, Jensen J J. Mechanical properties of high strength concrete and application in design [C]// Symposium on Utilization of High Strength Concrete and Application in Design. Stavanger, Norway, 1987: 149-159.
[19] Chen J F, Pan W K. Three dimensional stress distribution in FRP-to-concrete bond test specimens[J]. Construction and Building Materials, 2006, 20(1/2): 46-58. DOI:10.1016/j.conbuildmat.2005.06.037.

备注/Memo

备注/Memo:
收稿日期: 2018-04-22.
作者简介: 高磊(1989—),男,博士生;张峰(联系人),男,博士,副教授,博士生导师,zhangfeng2008@sdu.edu.cn.
基金项目: 国家自然科学基金青年基金资助项目(51108249)、山东省自然科学基金面上资助项目(ZR2016EEM21).
引用本文: 高磊,张峰,叶见曙,等.侧向约束下FRP加固混凝土界面黏结性能[J].东南大学学报(自然科学版),2018,48(6):996-1003. DOI:10.3969/j.issn.1001-0505.2018.06.003.
更新日期/Last Update: 2018-11-20